Commit 2106efda authored by Jakub Kicinski's avatar Jakub Kicinski Committed by David S. Miller

net: remove .ndo_change_proto_down

.ndo_change_proto_down was added seemingly to enable out-of-tree
implementations. Over 2.5yrs later we still have no real users
upstream. Hardwire the generic implementation for now, we can
revert once real users materialize. (rocker is a test vehicle,
not a user.)

We need to drop the optimization on the sysfs side, because
unlike ndos priv_flags will be changed at runtime, so we'd
need READ_ONCE/WRITE_ONCE everywhere..
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c384cee1
......@@ -1995,17 +1995,6 @@ static int rocker_port_get_phys_port_name(struct net_device *dev,
return err ? -EOPNOTSUPP : 0;
}
static int rocker_port_change_proto_down(struct net_device *dev,
bool proto_down)
{
struct rocker_port *rocker_port = netdev_priv(dev);
if (rocker_port->dev->flags & IFF_UP)
rocker_port_set_enable(rocker_port, !proto_down);
rocker_port->dev->proto_down = proto_down;
return 0;
}
static void rocker_port_neigh_destroy(struct net_device *dev,
struct neighbour *n)
{
......@@ -2037,7 +2026,6 @@ static const struct net_device_ops rocker_port_netdev_ops = {
.ndo_set_mac_address = rocker_port_set_mac_address,
.ndo_change_mtu = rocker_port_change_mtu,
.ndo_get_phys_port_name = rocker_port_get_phys_port_name,
.ndo_change_proto_down = rocker_port_change_proto_down,
.ndo_neigh_destroy = rocker_port_neigh_destroy,
.ndo_get_port_parent_id = rocker_port_get_port_parent_id,
};
......
......@@ -1171,7 +1171,6 @@ static const struct net_device_ops macvlan_netdev_ops = {
#endif
.ndo_get_iflink = macvlan_dev_get_iflink,
.ndo_features_check = passthru_features_check,
.ndo_change_proto_down = dev_change_proto_down_generic,
};
void macvlan_common_setup(struct net_device *dev)
......@@ -1182,7 +1181,7 @@ void macvlan_common_setup(struct net_device *dev)
dev->max_mtu = ETH_MAX_MTU;
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
netif_keep_dst(dev);
dev->priv_flags |= IFF_UNICAST_FLT;
dev->priv_flags |= IFF_UNICAST_FLT | IFF_CHANGE_PROTO_DOWN;
dev->netdev_ops = &macvlan_netdev_ops;
dev->needs_free_netdev = true;
dev->header_ops = &macvlan_hard_header_ops;
......
......@@ -3234,7 +3234,6 @@ static const struct net_device_ops vxlan_netdev_ether_ops = {
.ndo_fdb_dump = vxlan_fdb_dump,
.ndo_fdb_get = vxlan_fdb_get,
.ndo_fill_metadata_dst = vxlan_fill_metadata_dst,
.ndo_change_proto_down = dev_change_proto_down_generic,
};
static const struct net_device_ops vxlan_netdev_raw_ops = {
......@@ -3305,7 +3304,7 @@ static void vxlan_setup(struct net_device *dev)
dev->hw_features |= NETIF_F_RXCSUM;
dev->hw_features |= NETIF_F_GSO_SOFTWARE;
netif_keep_dst(dev);
dev->priv_flags |= IFF_NO_QUEUE;
dev->priv_flags |= IFF_NO_QUEUE | IFF_CHANGE_PROTO_DOWN;
/* MTU range: 68 - 65535 */
dev->min_mtu = ETH_MIN_MTU;
......
......@@ -1297,11 +1297,6 @@ struct netdev_net_notifier {
* TX queue.
* int (*ndo_get_iflink)(const struct net_device *dev);
* Called to get the iflink value of this device.
* void (*ndo_change_proto_down)(struct net_device *dev,
* bool proto_down);
* This function is used to pass protocol port error state information
* to the switch driver. The switch driver can react to the proto_down
* by doing a phys down on the associated switch port.
* int (*ndo_fill_metadata_dst)(struct net_device *dev, struct sk_buff *skb);
* This function is used to get egress tunnel information for given skb.
* This is useful for retrieving outer tunnel header parameters while
......@@ -1542,8 +1537,6 @@ struct net_device_ops {
int queue_index,
u32 maxrate);
int (*ndo_get_iflink)(const struct net_device *dev);
int (*ndo_change_proto_down)(struct net_device *dev,
bool proto_down);
int (*ndo_fill_metadata_dst)(struct net_device *dev,
struct sk_buff *skb);
void (*ndo_set_rx_headroom)(struct net_device *dev,
......@@ -1612,6 +1605,7 @@ struct net_device_ops {
* @IFF_LIVE_RENAME_OK: rename is allowed while device is up and running
* @IFF_TX_SKB_NO_LINEAR: device/driver is capable of xmitting frames with
* skb_headlen(skb) == 0 (data starts from frag0)
* @IFF_CHANGE_PROTO_DOWN: device supports setting carrier via IFLA_PROTO_DOWN
*/
enum netdev_priv_flags {
IFF_802_1Q_VLAN = 1<<0,
......@@ -1646,6 +1640,7 @@ enum netdev_priv_flags {
IFF_L3MDEV_RX_HANDLER = 1<<29,
IFF_LIVE_RENAME_OK = 1<<30,
IFF_TX_SKB_NO_LINEAR = 1<<31,
IFF_CHANGE_PROTO_DOWN = BIT_ULL(32),
};
#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
......@@ -1982,7 +1977,7 @@ struct net_device {
/* Read-mostly cache-line for fast-path access */
unsigned int flags;
unsigned int priv_flags;
unsigned long long priv_flags;
const struct net_device_ops *netdev_ops;
int ifindex;
unsigned short gflags;
......@@ -3735,7 +3730,6 @@ int dev_get_port_parent_id(struct net_device *dev,
struct netdev_phys_item_id *ppid, bool recurse);
bool netdev_port_same_parent_id(struct net_device *a, struct net_device *b);
int dev_change_proto_down(struct net_device *dev, bool proto_down);
int dev_change_proto_down_generic(struct net_device *dev, bool proto_down);
void dev_change_proto_down_reason(struct net_device *dev, unsigned long mask,
u32 value);
struct sk_buff *validate_xmit_skb_list(struct sk_buff *skb, struct net_device *dev, bool *again);
......
......@@ -252,7 +252,7 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset)
stats = dev_get_stats(vlandev, &temp);
seq_printf(seq,
"%s VID: %d REORDER_HDR: %i dev->priv_flags: %hx\n",
"%s VID: %d REORDER_HDR: %i dev->priv_flags: %llx\n",
vlandev->name, vlan->vlan_id,
(int)(vlan->flags & 1), vlandev->priv_flags);
......
......@@ -8558,35 +8558,17 @@ bool netdev_port_same_parent_id(struct net_device *a, struct net_device *b)
EXPORT_SYMBOL(netdev_port_same_parent_id);
/**
* dev_change_proto_down - update protocol port state information
* dev_change_proto_down - set carrier according to proto_down.
*
* @dev: device
* @proto_down: new value
*
* This info can be used by switch drivers to set the phys state of the
* port.
*/
int dev_change_proto_down(struct net_device *dev, bool proto_down)
{
const struct net_device_ops *ops = dev->netdev_ops;
if (!ops->ndo_change_proto_down)
if (!(dev->priv_flags & IFF_CHANGE_PROTO_DOWN))
return -EOPNOTSUPP;
if (!netif_device_present(dev))
return -ENODEV;
return ops->ndo_change_proto_down(dev, proto_down);
}
EXPORT_SYMBOL(dev_change_proto_down);
/**
* dev_change_proto_down_generic - generic implementation for
* ndo_change_proto_down that sets carrier according to
* proto_down.
*
* @dev: device
* @proto_down: new value
*/
int dev_change_proto_down_generic(struct net_device *dev, bool proto_down)
{
if (proto_down)
netif_carrier_off(dev);
else
......@@ -8594,7 +8576,7 @@ int dev_change_proto_down_generic(struct net_device *dev, bool proto_down)
dev->proto_down = proto_down;
return 0;
}
EXPORT_SYMBOL(dev_change_proto_down_generic);
EXPORT_SYMBOL(dev_change_proto_down);
/**
* dev_change_proto_down_reason - proto down reason
......
......@@ -488,14 +488,6 @@ static ssize_t proto_down_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct net_device *netdev = to_net_dev(dev);
/* The check is also done in change_proto_down; this helps returning
* early without hitting the trylock/restart in netdev_store.
*/
if (!netdev->netdev_ops->ndo_change_proto_down)
return -EOPNOTSUPP;
return netdev_store(dev, attr, buf, len, change_proto_down);
}
NETDEVICE_SHOW_RW(proto_down, fmt_dec);
......
......@@ -2539,13 +2539,12 @@ static int do_set_proto_down(struct net_device *dev,
struct netlink_ext_ack *extack)
{
struct nlattr *pdreason[IFLA_PROTO_DOWN_REASON_MAX + 1];
const struct net_device_ops *ops = dev->netdev_ops;
unsigned long mask = 0;
u32 value;
bool proto_down;
int err;
if (!ops->ndo_change_proto_down) {
if (!(dev->priv_flags & IFF_CHANGE_PROTO_DOWN)) {
NL_SET_ERR_MSG(extack, "Protodown not supported by device");
return -EOPNOTSUPP;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment