irqchip/atmel-aic5: Add support for sam9x60 irqchip

Add support for SAM9X60 irqchip.
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1568026835-6646-1-git-send-email-claudiu.beznea@microchip.com

[claudiu.beznea@microchip.com: update aic5_irq_fixups[], update
 documentation]

Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt

 * Advanced Interrupt Controller (AIC)
 
 Required properties:
-- compatible: Should be "atmel,<chip>-aic"
-  <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
+- compatible: Should be:
+    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
+      "sama5d3" or "sama5d4"
+    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
+
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
   The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).

drivers/irqchip/irq-atmel-aic5.c

@@ -313,6 +313,7 @@ static void __init sama5d3_aic_irq_fixup(void)
 static const struct of_device_id aic5_irq_fixups[] __initconst = {
 	{ .compatible = "atmel,sama5d3", .data = sama5d3_aic_irq_fixup },
 	{ .compatible = "atmel,sama5d4", .data = sama5d3_aic_irq_fixup },
+	{ .compatible = "microchip,sam9x60", .data = sama5d3_aic_irq_fixup },
 	{ /* sentinel */ },
 };
 
@@ -390,3 +391,12 @@ static int __init sama5d4_aic5_of_init(struct device_node *node,
 	return aic5_of_init(node, parent, NR_SAMA5D4_IRQS);
 }
 IRQCHIP_DECLARE(sama5d4_aic5, "atmel,sama5d4-aic", sama5d4_aic5_of_init);
+
+#define NR_SAM9X60_IRQS		50
+
+static int __init sam9x60_aic5_of_init(struct device_node *node,
+				       struct device_node *parent)
+{
+	return aic5_of_init(node, parent, NR_SAM9X60_IRQS);
+}
+IRQCHIP_DECLARE(sam9x60_aic5, "microchip,sam9x60-aic", sam9x60_aic5_of_init);