ide: drop "PIO data" argument from ide_get_best_pio_mode()

* Drop no longer needed "PIO data" argument from ide_get_best_pio_mode()
  and convert all users accordingly.

* Remove no longer needed ide_pio_data_t.
Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent e5fa4b29
......@@ -277,7 +277,6 @@ EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
* @drive: drive to consider
* @mode_wanted: preferred mode
* @max_mode: highest allowed mode
* @d: PIO data
*
* This routine returns the recommended PIO settings for a given drive,
* based on the drive->id information and the ide_pio_blacklist[].
......@@ -286,7 +285,7 @@ EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
* This is used by most chipset support modules when "auto-tuning".
*/
u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)
u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
{
int pio_mode;
struct hd_driveid* id = drive->id;
......@@ -335,9 +334,6 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_p
if (pio_mode > max_mode)
pio_mode = max_mode;
if (d)
d->pio_mode = pio_mode;
return pio_mode;
}
......
......@@ -117,7 +117,7 @@ static void ali14xx_tune_drive (ide_drive_t *drive, u8 pio)
unsigned long flags;
int bus_speed = system_bus_clock();
pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, NULL);
pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO);
/* calculate timing, according to PIO mode */
time1 = ide_pio_cycle_time(drive, pio);
......
......@@ -71,7 +71,7 @@ static void tune_dtc2278 (ide_drive_t *drive, u8 pio)
{
unsigned long flags;
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
if (pio >= 3) {
spin_lock_irqsave(&ide_lock, flags);
......
......@@ -208,7 +208,7 @@ static u8 ht_pio2timings(ide_drive_t *drive, u8 pio)
if (pio) {
unsigned int cycle_time;
pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
pio = ide_get_best_pio_mode(drive, pio, 5);
cycle_time = ide_pio_cycle_time(drive, pio);
/*
......
......@@ -258,7 +258,7 @@ static void qd6580_tune_drive (ide_drive_t *drive, u8 pio)
int recovery_time = 415; /* worst case values from the dos driver */
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ide_pio_cycle_time(drive, pio);
switch (pio) {
......
......@@ -110,7 +110,7 @@ static void tune_umc (ide_drive_t *drive, u8 pio)
unsigned long flags;
ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup;
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
drive->name, pio, pio_to_umc[pio]);
spin_lock_irqsave(&ide_lock, flags);
......
......@@ -106,7 +106,7 @@ static void auide_tune_drive(ide_drive_t *drive, byte pio)
u8 speed;
/* get the best pio mode for the drive */
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n",
drive->name, pio);
......
......@@ -142,7 +142,7 @@ static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
(void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0);
}
......
......@@ -295,7 +295,6 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
{
ide_pio_data_t d;
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
int s_time, a_time, c_time;
......@@ -307,7 +306,7 @@ static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
u8 cd_dma_fifo = 0;
int unit = drive->select.b.unit & 1;
pio = ide_get_best_pio_mode(drive, pio, 5, &d);
pio = ide_get_best_pio_mode(drive, pio, 5);
s_time = ide_pio_timings[pio].setup_time;
a_time = ide_pio_timings[pio].active_time;
if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
......
......@@ -155,7 +155,7 @@ static void atiixp_tune_pio(ide_drive_t *drive, u8 pio)
static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
atiixp_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
......
......@@ -661,7 +661,7 @@ static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
return;
}
mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5);
cycle_time = ide_pio_cycle_time(drive, mode_wanted);
cmd640_set_mode(index, mode_wanted, cycle_time);
......
......@@ -226,7 +226,7 @@ static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5);
cycle_time = ide_pio_cycle_time(drive, pio_mode);
cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
......
......@@ -126,7 +126,7 @@ static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
}
......
......@@ -82,7 +82,7 @@ static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
cs5530_tunepio(drive, pio);
......
......@@ -89,7 +89,7 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
pioa = speed - XFER_PIO_0;
piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]),
255, 4, NULL);
255, 4);
cmd = pioa < piob ? pioa : piob;
/* Write the speed of the current drive */
......@@ -159,7 +159,7 @@ static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed)
/* cs5535 max pio is pio 4, best_pio will check the blacklist.
i think we don't need to rate_filter the incoming xferspeed
since we know we're only going to choose pio */
xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4, NULL);
xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4);
ide_config_drive_speed(drive, modes[xferspeed]);
cs5535_set_speed(drive, xferspeed);
}
......@@ -174,7 +174,7 @@ static int cs5535_dma_check(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive)) {
speed = ide_get_best_pio_mode(drive, 255, 4, NULL);
speed = ide_get_best_pio_mode(drive, 255, 4);
cs5535_set_drive(drive, speed);
}
......
......@@ -330,7 +330,7 @@ static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
#endif /* CY82C693_DEBUG_LOGS */
/* first let's calc the pio modes */
pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO, NULL);
pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO);
#if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
......
......@@ -80,7 +80,7 @@ static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
pio = ide_get_best_pio_mode(drive, pio, 5);
(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
}
......
......@@ -652,7 +652,7 @@ static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed)
static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
}
......
......@@ -82,7 +82,7 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
{ 2, 1 },
{ 2, 3 }, };
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
spin_lock_irqsave(&tune_lock, flags);
pci_read_config_word(dev, master_port, &master_data);
......@@ -214,7 +214,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
pio = ide_get_best_pio_mode(drive, 255, 4, NULL);
pio = ide_get_best_pio_mode(drive, 255, 4);
it8213_tune_chipset(drive, XFER_PIO_0 + pio);
return -1;
......
......@@ -255,7 +255,7 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio)
* on the cable.
*/
if (pair) {
u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4, NULL);
u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
/* trim PIO to the slowest of the master/slave */
if (pair_pio < set_pio)
set_pio = pair_pio;
......@@ -276,7 +276,7 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio)
static void it821x_tuneproc(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
(void)it821x_tunepio(drive, pio);
}
......
......@@ -97,7 +97,7 @@ static void jmicron_tuneproc (ide_drive_t *drive, byte mode_wanted)
static void config_jmicron_chipset_for_pio (ide_drive_t *drive, byte set_speed)
{
u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5);
if (set_speed)
(void) ide_config_drive_speed(drive, speed);
}
......
......@@ -147,12 +147,12 @@ static void compute_pios(ide_drive_t *drive, u8 pio)
int d;
ide_hwif_t *hwif = HWIF(drive);
drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO, NULL);
drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO);
for (d = 0; d < 2; ++d) {
drive = &hwif->drives[d];
if (drive->present) {
if (drive->drive_data == PIO_DONT_KNOW)
drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO, NULL);
drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO);
#ifdef OPTI621_DEBUG
printk("%s: Selected PIO mode %d\n",
drive->name, drive->drive_data);
......
......@@ -219,7 +219,7 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
(void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
......
......@@ -145,7 +145,7 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
}
......
......@@ -219,7 +219,7 @@ static void piix_tune_pio (ide_drive_t *drive, u8 pio)
*/
static void piix_tune_drive (ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
piix_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
......
......@@ -304,7 +304,7 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au
return;
}
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
......
......@@ -210,7 +210,7 @@ static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
unsigned char speed = XFER_PIO_0;
int offset;
mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4);
switch (mode_wanted) {
case 4:
speed = XFER_PIO_4;
......
......@@ -205,7 +205,7 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
svwks_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
......
......@@ -189,7 +189,7 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
/* trim *taskfile* PIO to the slowest of the master/slave */
if (pair->present) {
u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4, NULL);
u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
if (pair_pio < tf_pio)
tf_pio = pair_pio;
......@@ -221,7 +221,7 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
static void sil_tuneproc(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
sil_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
......
......@@ -521,7 +521,7 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
config_art_rwp_pio(drive, pio);
return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
......
......@@ -83,7 +83,7 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
pio = ide_get_best_pio_mode(drive, pio, 5);
drv_ctrl = get_pio_timings(drive, pio);
......
......@@ -103,7 +103,7 @@ static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
slc90e66_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
......
......@@ -47,7 +47,7 @@ static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed)
static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
(void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
}
......
......@@ -96,7 +96,7 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed)
static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
{
int use_pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
int use_pio = ide_get_best_pio_mode(drive, pio, 4);
(void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
}
......
......@@ -431,13 +431,12 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
static void
m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio)
{
ide_pio_data_t d;
#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
volatile pcmconf8xx_t *pcmp;
ulong timing, mask, reg;
#endif
pio = ide_get_best_pio_mode(drive, pio, 4, &d);
pio = ide_get_best_pio_mode(drive, pio, 4);
#if 1
printk("%s[%d] %s: best PIO mode: %d\n",
......
......@@ -627,7 +627,7 @@ pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ide_pio_cycle_time(drive, pio);
switch (pmif->kind) {
......
......@@ -1377,12 +1377,8 @@ typedef struct ide_pio_timings_s {
/* active + recovery (+ setup for some chips) */
} ide_pio_timings_t;
typedef struct ide_pio_data_s {
u8 pio_mode;
} ide_pio_data_t;
unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
extern const ide_pio_timings_t ide_pio_timings[6];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment