Commit 2144381d authored by David Woodhouse's avatar David Woodhouse

Merge branch 'async' of macbook:git/btrfs-unstable

Conflicts:
	drivers/md/Makefile
	lib/raid6/unroll.pl
parents 45d7f32c e5d84970
......@@ -22,6 +22,20 @@ config ASYNC_RAID6_RECOV
tristate
select ASYNC_CORE
select ASYNC_PQ
select ASYNC_XOR
config ASYNC_RAID6_TEST
tristate "Self test for hardware accelerated raid6 recovery"
depends on ASYNC_RAID6_RECOV
select ASYNC_MEMCPY
---help---
This is a one-shot self test that permutes through the
recovery of all the possible two disk failure scenarios for a
N-disk array. Recovery is performed with the asynchronous
raid6 recovery routines, and will optionally use an offload
engine if one is available.
If unsure, say N.
config ASYNC_TX_DISABLE_PQ_VAL_DMA
bool
......
......@@ -121,7 +121,7 @@ config MD_RAID10
config MD_RAID456
tristate "RAID-4/RAID-5/RAID-6 mode"
depends on BLK_DEV_MD
select MD_RAID6_PQ
select RAID6_PQ
select ASYNC_MEMCPY
select ASYNC_XOR
select ASYNC_PQ
......@@ -165,22 +165,6 @@ config MULTICORE_RAID456
If unsure, say N.
config MD_RAID6_PQ
tristate
config ASYNC_RAID6_TEST
tristate "Self test for hardware accelerated raid6 recovery"
depends on MD_RAID6_PQ
select ASYNC_RAID6_RECOV
---help---
This is a one-shot self test that permutes through the
recovery of all the possible two disk failure scenarios for a
N-disk array. Recovery is performed with the asynchronous
raid6 recovery routines, and will optionally use an offload
engine if one is available.
If unsure, say N.
config MD_MULTIPATH
tristate "Multipath I/O support"
depends on BLK_DEV_MD
......
......@@ -12,13 +12,6 @@ dm-log-userspace-y \
+= dm-log-userspace-base.o dm-log-userspace-transfer.o
md-mod-y += md.o bitmap.o
raid456-y += raid5.o
raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \
raid6int1.o raid6int2.o raid6int4.o \
raid6int8.o raid6int16.o raid6int32.o \
raid6altivec1.o raid6altivec2.o raid6altivec4.o \
raid6altivec8.o \
raid6mmx.o raid6sse1.o raid6sse2.o
hostprogs-y += mktables
# Note: link order is important. All raid personalities
# and must come before md.o, as they each initialise
......@@ -29,7 +22,6 @@ obj-$(CONFIG_MD_LINEAR) += linear.o
obj-$(CONFIG_MD_RAID0) += raid0.o
obj-$(CONFIG_MD_RAID1) += raid1.o
obj-$(CONFIG_MD_RAID10) += raid10.o
obj-$(CONFIG_MD_RAID6_PQ) += raid6_pq.o
obj-$(CONFIG_MD_RAID456) += raid456.o
obj-$(CONFIG_MD_MULTIPATH) += multipath.o
obj-$(CONFIG_MD_FAULTY) += faulty.o
......@@ -45,75 +37,6 @@ obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o
obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o
obj-$(CONFIG_DM_ZERO) += dm-zero.o
quiet_cmd_unroll = UNROLL $@
cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
< $< > $@ || ( rm -f $@ && exit 1 )
ifeq ($(CONFIG_ALTIVEC),y)
altivec_flags := -maltivec -mabi=altivec
endif
ifeq ($(CONFIG_DM_UEVENT),y)
dm-mod-objs += dm-uevent.o
endif
targets += raid6int1.c
$(obj)/raid6int1.c: UNROLL := 1
$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int2.c
$(obj)/raid6int2.c: UNROLL := 2
$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int4.c
$(obj)/raid6int4.c: UNROLL := 4
$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int8.c
$(obj)/raid6int8.c: UNROLL := 8
$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int16.c
$(obj)/raid6int16.c: UNROLL := 16
$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int32.c
$(obj)/raid6int32.c: UNROLL := 32
$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec1.o += $(altivec_flags)
targets += raid6altivec1.c
$(obj)/raid6altivec1.c: UNROLL := 1
$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec2.o += $(altivec_flags)
targets += raid6altivec2.c
$(obj)/raid6altivec2.c: UNROLL := 2
$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec4.o += $(altivec_flags)
targets += raid6altivec4.c
$(obj)/raid6altivec4.c: UNROLL := 4
$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec8.o += $(altivec_flags)
targets += raid6altivec8.c
$(obj)/raid6altivec8.c: UNROLL := 8
$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
quiet_cmd_mktable = TABLE $@
cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
targets += raid6tables.c
$(obj)/raid6tables.c: $(obj)/mktables FORCE
$(call if_changed,mktable)
......@@ -7,6 +7,9 @@ config BINARY_PRINTF
menu "Library routines"
config RAID6_PQ
tristate
config BITREVERSE
tristate
......
......@@ -69,6 +69,7 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_LZO_COMPRESS) += lzo/
obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
obj-$(CONFIG_RAID6_PQ) += raid6/
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
......
obj-$(CONFIG_RAID6_PQ) += raid6_pq.o
raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \
raid6int1.o raid6int2.o raid6int4.o \
raid6int8.o raid6int16.o raid6int32.o \
raid6altivec1.o raid6altivec2.o raid6altivec4.o \
raid6altivec8.o \
raid6mmx.o raid6sse1.o raid6sse2.o
hostprogs-y += mktables
quiet_cmd_unroll = UNROLL $@
cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
< $< > $@ || ( rm -f $@ && exit 1 )
ifeq ($(CONFIG_ALTIVEC),y)
altivec_flags := -maltivec -mabi=altivec
endif
targets += raid6int1.c
$(obj)/raid6int1.c: UNROLL := 1
$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int2.c
$(obj)/raid6int2.c: UNROLL := 2
$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int4.c
$(obj)/raid6int4.c: UNROLL := 4
$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int8.c
$(obj)/raid6int8.c: UNROLL := 8
$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int16.c
$(obj)/raid6int16.c: UNROLL := 16
$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int32.c
$(obj)/raid6int32.c: UNROLL := 32
$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec1.o += $(altivec_flags)
targets += raid6altivec1.c
$(obj)/raid6altivec1.c: UNROLL := 1
$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec2.o += $(altivec_flags)
targets += raid6altivec2.c
$(obj)/raid6altivec2.c: UNROLL := 2
$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec4.o += $(altivec_flags)
targets += raid6altivec4.c
$(obj)/raid6altivec4.c: UNROLL := 4
$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec8.o += $(altivec_flags)
targets += raid6altivec8.c
$(obj)/raid6altivec8.c: UNROLL := 8
$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
quiet_cmd_mktable = TABLE $@
cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
targets += raid6tables.c
$(obj)/raid6tables.c: $(obj)/mktables FORCE
$(call if_changed,mktable)
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment