Commit 215b8237 authored by Christophe Leroy's avatar Christophe Leroy Committed by Michael Ellerman

powerpc/32s: set up an early static hash table for KASAN.

KASAN requires early activation of hash table, before memblock()
functions are available.

This patch implements an early hash_table statically defined in
__initdata.

During early boot, a single page table is used.

For hash32, when doing the final init, one page table is allocated
for each PGD entry because of the _PAGE_HASHPTE flag which can't be
common to several virt pages. This is done after memblock get
available but before switching to the final hash table, otherwise
there are issues with TLB flushing due to the shared entries.
Signed-off-by: default avatarChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 72f208c6
......@@ -160,6 +160,10 @@ __after_mmu_off:
bl flush_tlbs
bl initial_bats
bl load_segment_registers
#ifdef CONFIG_KASAN
bl early_hash_table
#endif
#if defined(CONFIG_BOOTX_TEXT)
bl setup_disp_bat
#endif
......@@ -205,7 +209,7 @@ __after_mmu_off:
*/
turn_on_mmu:
mfmsr r0
ori r0,r0,MSR_DR|MSR_IR
ori r0,r0,MSR_DR|MSR_IR|MSR_RI
mtspr SPRN_SRR1,r0
lis r0,start_here@h
ori r0,r0,start_here@l
......@@ -884,11 +888,24 @@ _ENTRY(__restore_cpu_setup)
blr
#endif /* !defined(CONFIG_PPC_BOOK3S_32) */
/*
* Load stuff into the MMU. Intended to be called with
* IR=0 and DR=0.
*/
#ifdef CONFIG_KASAN
early_hash_table:
sync /* Force all PTE updates to finish */
isync
tlbia /* Clear all TLB entries */
sync /* wait for tlbia/tlbie to finish */
TLBSYNC /* ... on all CPUs */
/* Load the SDR1 register (hash table base & size) */
lis r6, early_hash - PAGE_OFFSET@h
ori r6, r6, 3 /* 256kB table */
mtspr SPRN_SDR1, r6
blr
#endif
load_up_mmu:
sync /* Force all PTE updates to finish */
isync
......@@ -900,29 +917,6 @@ load_up_mmu:
tophys(r6,r6)
lwz r6,_SDR1@l(r6)
mtspr SPRN_SDR1,r6
li r0, NUM_USER_SEGMENTS /* load up user segment register values */
mtctr r0 /* for context 0 */
li r3, 0 /* Kp = 0, Ks = 0, VSID = 0 */
#ifdef CONFIG_PPC_KUEP
oris r3, r3, SR_NX@h /* Set Nx */
#endif
#ifdef CONFIG_PPC_KUAP
oris r3, r3, SR_KS@h /* Set Ks */
#endif
li r4,0
3: mtsrin r3,r4
addi r3,r3,0x111 /* increment VSID */
addis r4,r4,0x1000 /* address of next segment */
bdnz 3b
li r0, 16 - NUM_USER_SEGMENTS /* load up kernel segment registers */
mtctr r0 /* for context 0 */
rlwinm r3, r3, 0, ~SR_NX /* Nx = 0 */
rlwinm r3, r3, 0, ~SR_KS /* Ks = 0 */
oris r3, r3, SR_KP@h /* Kp = 1 */
3: mtsrin r3, r4
addi r3, r3, 0x111 /* increment VSID */
addis r4, r4, 0x1000 /* address of next segment */
bdnz 3b
/* Load the BAT registers with the values set up by MMU_init.
MMU_init takes care of whether we're on a 601 or not. */
......@@ -944,6 +938,32 @@ BEGIN_MMU_FTR_SECTION
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
load_segment_registers:
li r0, NUM_USER_SEGMENTS /* load up user segment register values */
mtctr r0 /* for context 0 */
li r3, 0 /* Kp = 0, Ks = 0, VSID = 0 */
#ifdef CONFIG_PPC_KUEP
oris r3, r3, SR_NX@h /* Set Nx */
#endif
#ifdef CONFIG_PPC_KUAP
oris r3, r3, SR_KS@h /* Set Ks */
#endif
li r4, 0
3: mtsrin r3, r4
addi r3, r3, 0x111 /* increment VSID */
addis r4, r4, 0x1000 /* address of next segment */
bdnz 3b
li r0, 16 - NUM_USER_SEGMENTS /* load up kernel segment registers */
mtctr r0 /* for context 0 */
rlwinm r3, r3, 0, ~SR_NX /* Nx = 0 */
rlwinm r3, r3, 0, ~SR_KS /* Ks = 0 */
oris r3, r3, SR_KP@h /* Kp = 1 */
3: mtsrin r3, r4
addi r3, r3, 0x111 /* increment VSID */
addis r4, r4, 0x1000 /* address of next segment */
bdnz 3b
blr
/*
* This is where the main kernel code starts.
*/
......
......@@ -94,6 +94,13 @@ void __init kasan_mmu_init(void)
int ret;
struct memblock_region *reg;
if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE)) {
ret = kasan_init_shadow_page_tables(KASAN_SHADOW_START, KASAN_SHADOW_END);
if (ret)
panic("kasan: kasan_init_shadow_page_tables() failed");
}
for_each_memblock(memory, reg) {
phys_addr_t base = reg->base;
phys_addr_t top = min(base + reg->size, total_lowmem);
......@@ -135,6 +142,20 @@ void *module_alloc(unsigned long size)
}
#endif
#ifdef CONFIG_PPC_BOOK3S_32
u8 __initdata early_hash[256 << 10] __aligned(256 << 10) = {0};
static void __init kasan_early_hash_table(void)
{
modify_instruction_site(&patch__hash_page_A0, 0xffff, __pa(early_hash) >> 16);
modify_instruction_site(&patch__flush_hash_A0, 0xffff, __pa(early_hash) >> 16);
Hash = (struct hash_pte *)early_hash;
}
#else
static void __init kasan_early_hash_table(void) {}
#endif
void __init kasan_early_init(void)
{
unsigned long addr = KASAN_SHADOW_START;
......@@ -152,5 +173,5 @@ void __init kasan_early_init(void)
} while (pmd++, addr = next, addr != end);
if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE))
WARN(true, "KASAN not supported on hash 6xx");
kasan_early_hash_table();
}
......@@ -106,6 +106,7 @@ extern unsigned int rtas_data, rtas_size;
struct hash_pte;
extern struct hash_pte *Hash, *Hash_end;
extern unsigned long Hash_size, Hash_mask;
extern u8 early_hash[];
#endif /* CONFIG_PPC32 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment