Commit 21805085 authored by Peter Zijlstra's avatar Peter Zijlstra Committed by Ingo Molnar

sched: adaptive scheduler granularity

Instead of specifying the preemption granularity, specify the wanted
latency. By fixing the granlarity to a constany the wakeup latency
it a function of the number of running tasks on the rq.

Invert this relation.

sysctl_sched_granularity becomes a minimum for the dynamic granularity
computed from the new sysctl_sched_latency.

Then use this latency to do more intelligent granularity decisions: if
there are fewer tasks running then we can schedule coarser. This helps
performance while still always keeping the latency target.
Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
parent 1fc84aaa
...@@ -1399,6 +1399,7 @@ static inline void idle_task_exit(void) {} ...@@ -1399,6 +1399,7 @@ static inline void idle_task_exit(void) {}
extern void sched_idle_next(void); extern void sched_idle_next(void);
extern unsigned int sysctl_sched_latency;
extern unsigned int sysctl_sched_granularity; extern unsigned int sysctl_sched_granularity;
extern unsigned int sysctl_sched_wakeup_granularity; extern unsigned int sysctl_sched_wakeup_granularity;
extern unsigned int sysctl_sched_batch_wakeup_granularity; extern unsigned int sysctl_sched_batch_wakeup_granularity;
......
...@@ -4911,14 +4911,18 @@ cpumask_t nohz_cpu_mask = CPU_MASK_NONE; ...@@ -4911,14 +4911,18 @@ cpumask_t nohz_cpu_mask = CPU_MASK_NONE;
static inline void sched_init_granularity(void) static inline void sched_init_granularity(void)
{ {
unsigned int factor = 1 + ilog2(num_online_cpus()); unsigned int factor = 1 + ilog2(num_online_cpus());
const unsigned long gran_limit = 100000000; const unsigned long limit = 100000000;
sysctl_sched_granularity *= factor; sysctl_sched_granularity *= factor;
if (sysctl_sched_granularity > gran_limit) if (sysctl_sched_granularity > limit)
sysctl_sched_granularity = gran_limit; sysctl_sched_granularity = limit;
sysctl_sched_runtime_limit = sysctl_sched_granularity * 5; sysctl_sched_latency *= factor;
sysctl_sched_wakeup_granularity = sysctl_sched_granularity / 2; if (sysctl_sched_latency > limit)
sysctl_sched_latency = limit;
sysctl_sched_runtime_limit = sysctl_sched_latency * 5;
sysctl_sched_wakeup_granularity = sysctl_sched_latency / 2;
} }
#ifdef CONFIG_SMP #ifdef CONFIG_SMP
......
...@@ -15,23 +15,32 @@ ...@@ -15,23 +15,32 @@
* *
* Scaled math optimizations by Thomas Gleixner * Scaled math optimizations by Thomas Gleixner
* Copyright (C) 2007, Thomas Gleixner <tglx@linutronix.de> * Copyright (C) 2007, Thomas Gleixner <tglx@linutronix.de>
*
* Adaptive scheduling granularity, math enhancements by Peter Zijlstra
* Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
*/ */
/* /*
* Preemption granularity: * Targeted preemption latency for CPU-bound tasks:
* (default: 10 msec, units: nanoseconds) * (default: 20ms, units: nanoseconds)
* *
* NOTE: this granularity value is not the same as the concept of * NOTE: this latency value is not the same as the concept of
* 'timeslice length' - timeslices in CFS will typically be somewhat * 'timeslice length' - timeslices in CFS are of variable length.
* larger than this value. (to see the precise effective timeslice * (to see the precise effective timeslice length of your workload,
* length of your workload, run vmstat and monitor the context-switches * run vmstat and monitor the context-switches field)
* field)
* *
* On SMP systems the value of this is multiplied by the log2 of the * On SMP systems the value of this is multiplied by the log2 of the
* number of CPUs. (i.e. factor 2x on 2-way systems, 3x on 4-way * number of CPUs. (i.e. factor 2x on 2-way systems, 3x on 4-way
* systems, 4x on 8-way systems, 5x on 16-way systems, etc.) * systems, 4x on 8-way systems, 5x on 16-way systems, etc.)
* Targeted preemption latency for CPU-bound tasks:
*/ */
unsigned int sysctl_sched_granularity __read_mostly = 10000000UL; unsigned int sysctl_sched_latency __read_mostly = 20000000ULL;
/*
* Minimal preemption granularity for CPU-bound tasks:
* (default: 2 msec, units: nanoseconds)
*/
unsigned int sysctl_sched_granularity __read_mostly = 2000000ULL;
/* /*
* SCHED_BATCH wake-up granularity. * SCHED_BATCH wake-up granularity.
...@@ -212,6 +221,49 @@ static struct sched_entity *__pick_next_entity(struct cfs_rq *cfs_rq) ...@@ -212,6 +221,49 @@ static struct sched_entity *__pick_next_entity(struct cfs_rq *cfs_rq)
* Scheduling class statistics methods: * Scheduling class statistics methods:
*/ */
/*
* Calculate the preemption granularity needed to schedule every
* runnable task once per sysctl_sched_latency amount of time.
* (down to a sensible low limit on granularity)
*
* For example, if there are 2 tasks running and latency is 10 msecs,
* we switch tasks every 5 msecs. If we have 3 tasks running, we have
* to switch tasks every 3.33 msecs to get a 10 msecs observed latency
* for each task. We do finer and finer scheduling up to until we
* reach the minimum granularity value.
*
* To achieve this we use the following dynamic-granularity rule:
*
* gran = lat/nr - lat/nr/nr
*
* This comes out of the following equations:
*
* kA1 + gran = kB1
* kB2 + gran = kA2
* kA2 = kA1
* kB2 = kB1 - d + d/nr
* lat = d * nr
*
* Where 'k' is key, 'A' is task A (waiting), 'B' is task B (running),
* '1' is start of time, '2' is end of time, 'd' is delay between
* 1 and 2 (during which task B was running), 'nr' is number of tasks
* running, 'lat' is the the period of each task. ('lat' is the
* sched_latency that we aim for.)
*/
static long
sched_granularity(struct cfs_rq *cfs_rq)
{
unsigned int gran = sysctl_sched_latency;
unsigned int nr = cfs_rq->nr_running;
if (nr > 1) {
gran = gran/nr - gran/nr/nr;
gran = max(gran, sysctl_sched_granularity);
}
return gran;
}
/* /*
* We rescale the rescheduling granularity of tasks according to their * We rescale the rescheduling granularity of tasks according to their
* nice level, but only linearly, not exponentially: * nice level, but only linearly, not exponentially:
...@@ -302,7 +354,7 @@ __update_curr(struct cfs_rq *cfs_rq, struct sched_entity *curr) ...@@ -302,7 +354,7 @@ __update_curr(struct cfs_rq *cfs_rq, struct sched_entity *curr)
delta_fair = calc_delta_fair(delta_exec, lw); delta_fair = calc_delta_fair(delta_exec, lw);
delta_mine = calc_delta_mine(delta_exec, curr->load.weight, lw); delta_mine = calc_delta_mine(delta_exec, curr->load.weight, lw);
if (cfs_rq->sleeper_bonus > sysctl_sched_granularity) { if (cfs_rq->sleeper_bonus > sysctl_sched_latency) {
delta = min((u64)delta_mine, cfs_rq->sleeper_bonus); delta = min((u64)delta_mine, cfs_rq->sleeper_bonus);
delta = min(delta, (unsigned long)( delta = min(delta, (unsigned long)(
(long)sysctl_sched_runtime_limit - curr->wait_runtime)); (long)sysctl_sched_runtime_limit - curr->wait_runtime));
...@@ -689,7 +741,8 @@ static void entity_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr) ...@@ -689,7 +741,8 @@ static void entity_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr)
if (next == curr) if (next == curr)
return; return;
__check_preempt_curr_fair(cfs_rq, next, curr, sysctl_sched_granularity); __check_preempt_curr_fair(cfs_rq, next, curr,
sched_granularity(cfs_rq));
} }
/************************************************** /**************************************************
...@@ -1034,7 +1087,7 @@ static void task_new_fair(struct rq *rq, struct task_struct *p) ...@@ -1034,7 +1087,7 @@ static void task_new_fair(struct rq *rq, struct task_struct *p)
* it will preempt the parent: * it will preempt the parent:
*/ */
p->se.fair_key = current->se.fair_key - p->se.fair_key = current->se.fair_key -
niced_granularity(&rq->curr->se, sysctl_sched_granularity) - 1; niced_granularity(&rq->curr->se, sched_granularity(cfs_rq)) - 1;
/* /*
* The first wait is dominated by the child-runs-first logic, * The first wait is dominated by the child-runs-first logic,
* so do not credit it with that waiting time yet: * so do not credit it with that waiting time yet:
...@@ -1047,7 +1100,7 @@ static void task_new_fair(struct rq *rq, struct task_struct *p) ...@@ -1047,7 +1100,7 @@ static void task_new_fair(struct rq *rq, struct task_struct *p)
* -granularity/2, so initialize the task with that: * -granularity/2, so initialize the task with that:
*/ */
if (sysctl_sched_features & SCHED_FEAT_START_DEBIT) if (sysctl_sched_features & SCHED_FEAT_START_DEBIT)
p->se.wait_runtime = -((long)sysctl_sched_granularity / 2); p->se.wait_runtime = -(sched_granularity(cfs_rq) / 2);
__enqueue_entity(cfs_rq, se); __enqueue_entity(cfs_rq, se);
} }
......
...@@ -231,6 +231,17 @@ static ctl_table kern_table[] = { ...@@ -231,6 +231,17 @@ static ctl_table kern_table[] = {
.extra1 = &min_sched_granularity_ns, .extra1 = &min_sched_granularity_ns,
.extra2 = &max_sched_granularity_ns, .extra2 = &max_sched_granularity_ns,
}, },
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sched_latency_ns",
.data = &sysctl_sched_latency,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &min_sched_granularity_ns,
.extra2 = &max_sched_granularity_ns,
},
{ {
.ctl_name = CTL_UNNUMBERED, .ctl_name = CTL_UNNUMBERED,
.procname = "sched_wakeup_granularity_ns", .procname = "sched_wakeup_granularity_ns",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment