Merge branch 'irq/urgent' into irq/core

Reason: Further patches are conflicting with mainline fixes
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Documentation/DocBook/drm.tmpl

@@ -73,8 +73,8 @@
       services.
     </para>
     <para>
-      The core of every DRM driver is struct drm_device.  Drivers
-      will typically statically initialize a drm_device structure,
+      The core of every DRM driver is struct drm_driver.  Drivers
+      will typically statically initialize a drm_driver structure,
       then pass it to drm_init() at load time.
     </para>
 
@@ -84,7 +84,7 @@
     <title>Driver initialization</title>
     <para>
       Before calling the DRM initialization routines, the driver must
-      first create and fill out a struct drm_device structure.
+      first create and fill out a struct drm_driver structure.
     </para>
     <programlisting>
       static struct drm_driver driver = {

Documentation/networking/Makefile

@@ -4,6 +4,8 @@ obj- := dummy.o
 # List of programs to build
 hostprogs-y := ifenslave
 
+HOSTCFLAGS_ifenslave.o += -I$(objtree)/usr/include
+
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 

Documentation/workqueue.txt

@@ -190,9 +190,9 @@ resources, scheduled and executed.
 	* Long running CPU intensive workloads which can be better
 	  managed by the system scheduler.
 
-  WQ_FREEZEABLE
+  WQ_FREEZABLE
 
-	A freezeable wq participates in the freeze phase of the system
+	A freezable wq participates in the freeze phase of the system
 	suspend operations.  Work items on the wq are drained and no
 	new work item starts execution until thawed.
 

MAINTAINERS

@@ -2126,6 +2126,7 @@ S:	Supported
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
+M:	Vinod Koul <vinod.koul@intel.com>
 M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
@@ -2774,6 +2775,15 @@ F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
 F:	include/linux/gigaset_dev.h
 
+GPIO SUBSYSTEM
+M:	Grant Likely <grant.likely@secretlab.ca>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+T:	git git://git.secretlab.ca/git/linux-2.6.git
+F:	Documentation/gpio/gpio.txt
+F:	drivers/gpio/
+F:	include/linux/gpio*
+
 GRETH 10/100/1G Ethernet MAC device driver
 M:	Kristoffer Glembo <kristoffer@gaisler.com>
 L:	netdev@vger.kernel.org
@@ -4591,7 +4601,7 @@ F:	drivers/i2c/busses/i2c-ocores.c
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@secretlab.ca>
-L:	devicetree-discuss@lists.ozlabs.org
+L:	devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
 W:	http://fdt.secretlab.ca
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -1391,7 +1391,7 @@ config AEABI
 
 config OABI_COMPAT
 	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
-	depends on AEABI && EXPERIMENTAL
+	depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL
 	default y
 	help
 	  This option preserves the old syscall interface along with the

arch/arm/kernel/head.S

@@ -391,6 +391,7 @@ ENDPROC(__turn_mmu_on)
 
 
 #ifdef CONFIG_SMP_ON_UP
+	__INIT
 __fixup_smp:
 	and	r3, r9, #0x000f0000	@ architecture version
 	teq	r3, #0x000f0000		@ CPU ID supported?
@@ -415,18 +416,7 @@ __fixup_smp_on_up:
 	sub	r3, r0, r3
 	add	r4, r4, r3
 	add	r5, r5, r3
-2:	cmp	r4, r5
-	movhs	pc, lr
-	ldmia	r4!, {r0, r6}
- ARM(	str	r6, [r0, r3]	)
- THUMB(	add	r0, r0, r3	)
-#ifdef __ARMEB__
- THUMB(	mov	r6, r6, ror #16	)	@ Convert word order for big-endian.
-#endif
- THUMB(	strh	r6, [r0], #2	)	@ For Thumb-2, store as two halfwords
- THUMB(	mov	r6, r6, lsr #16	)	@ to be robust against misaligned r3.
- THUMB(	strh	r6, [r0]	)
-	b	2b
+	b	__do_fixup_smp_on_up
 ENDPROC(__fixup_smp)
 
 	.align
@@ -440,7 +430,31 @@ smp_on_up:
 	ALT_SMP(.long	1)
 	ALT_UP(.long	0)
 	.popsection
+#endif
 
+	.text
+__do_fixup_smp_on_up:
+	cmp	r4, r5
+	movhs	pc, lr
+	ldmia	r4!, {r0, r6}
+ ARM(	str	r6, [r0, r3]	)
+ THUMB(	add	r0, r0, r3	)
+#ifdef __ARMEB__
+ THUMB(	mov	r6, r6, ror #16	)	@ Convert word order for big-endian.
 #endif
+ THUMB(	strh	r6, [r0], #2	)	@ For Thumb-2, store as two halfwords
+ THUMB(	mov	r6, r6, lsr #16	)	@ to be robust against misaligned r3.
+ THUMB(	strh	r6, [r0]	)
+	b	__do_fixup_smp_on_up
+ENDPROC(__do_fixup_smp_on_up)
+
+ENTRY(fixup_smp)
+	stmfd	sp!, {r4 - r6, lr}
+	mov	r4, r0
+	add	r5, r0, r1
+	mov	r3, #0
+	bl	__do_fixup_smp_on_up
+	ldmfd	sp!, {r4 - r6, pc}
+ENDPROC(fixup_smp)
 
 #include "head-common.S"

arch/arm/kernel/hw_breakpoint.c

@@ -137,11 +137,10 @@ static u8 get_debug_arch(void)
 	u32 didr;
 
 	/* Do we implement the extended CPUID interface? */
-	if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
-		pr_warning("CPUID feature registers not supported. "
-				"Assuming v6 debug is present.\n");
+	if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
+	    "CPUID feature registers not supported. "
+	    "Assuming v6 debug is present.\n"))
 		return ARM_DEBUG_ARCH_V6;
-	}
 
 	ARM_DBG_READ(c0, 0, didr);
 	return (didr >> 16) & 0xf;
@@ -152,6 +151,12 @@ u8 arch_get_debug_arch(void)
 	return debug_arch;
 }
 
+static int debug_arch_supported(void)
+{
+	u8 arch = get_debug_arch();
+	return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+}
+
 /* Determine number of BRP register available. */
 static int get_num_brp_resources(void)
 {
@@ -268,6 +273,9 @@ static int enable_monitor_mode(void)
 
 int hw_breakpoint_slots(int type)
 {
+	if (!debug_arch_supported())
+		return 0;
+
 	/*
 	 * We can be called early, so don't rely on
 	 * our static variables being initialised.
@@ -834,11 +842,11 @@ static void reset_ctrl_regs(void *unused)
 
 	/*
 	 * v7 debug contains save and restore registers so that debug state
-	 * can be maintained across low-power modes without leaving
-	 * the debug logic powered up. It is IMPLEMENTATION DEFINED whether
-	 * we can write to the debug registers out of reset, so we must
-	 * unlock the OS Lock Access Register to avoid taking undefined
-	 * instruction exceptions later on.
+	 * can be maintained across low-power modes without leaving the debug
+	 * logic powered up. It is IMPLEMENTATION DEFINED whether we can access
+	 * the debug registers out of reset, so we must unlock the OS Lock
+	 * Access Register to avoid taking undefined instruction exceptions
+	 * later on.
 	 */
 	if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
 		/*
@@ -882,7 +890,7 @@ static int __init arch_hw_breakpoint_init(void)
 
 	debug_arch = get_debug_arch();
 
-	if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) {
+	if (!debug_arch_supported()) {
 		pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
 		return 0;
 	}
@@ -899,18 +907,18 @@ static int __init arch_hw_breakpoint_init(void)
 		pr_info("%d breakpoint(s) reserved for watchpoint "
 				"single-step.\n", core_num_reserved_brps);
 
+	/*
+	 * Reset the breakpoint resources. We assume that a halting
+	 * debugger will leave the world in a nice state for us.
+	 */
+	on_each_cpu(reset_ctrl_regs, NULL, 1);
+
 	ARM_DBG_READ(c1, 0, dscr);
 	if (dscr & ARM_DSCR_HDBGEN) {
+		max_watchpoint_len = 4;
 		pr_warning("halting debug mode enabled. Assuming maximum "
-				"watchpoint size of 4 bytes.");
+			   "watchpoint size of %u bytes.", max_watchpoint_len);
 	} else {
-		/*
-		 * Reset the breakpoint resources. We assume that a halting
-		 * debugger will leave the world in a nice state for us.
-		 */
-		smp_call_function(reset_ctrl_regs, NULL, 1);
-		reset_ctrl_regs(NULL);
-
 		/* Work out the maximum supported watchpoint length. */
 		max_watchpoint_len = get_max_wp_len();
 		pr_info("maximum watchpoint size is %u bytes.\n",

arch/arm/kernel/module.c

@@ -22,6 +22,7 @@
 
 #include <asm/pgtable.h>
 #include <asm/sections.h>
+#include <asm/smp_plat.h>
 #include <asm/unwind.h>
 
 #ifdef CONFIG_XIP_KERNEL
@@ -268,12 +269,28 @@ struct mod_unwind_map {
 	const Elf_Shdr *txt_sec;
 };
 
+static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr,
+	const Elf_Shdr *sechdrs, const char *name)
+{
+	const Elf_Shdr *s, *se;
+	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++)
+		if (strcmp(name, secstrs + s->sh_name) == 0)
+			return s;
+
+	return NULL;
+}
+
+extern void fixup_smp(const void *, unsigned long);
+
 int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 		    struct module *mod)
 {
+	const Elf_Shdr * __maybe_unused s = NULL;
 #ifdef CONFIG_ARM_UNWIND
 	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+	const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
 	struct mod_unwind_map maps[ARM_SEC_MAX];
 	int i;
 
@@ -315,6 +332,9 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 					         maps[i].txt_sec->sh_addr,
 					         maps[i].txt_sec->sh_size);
 #endif
+	s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
+	if (s && !is_smp())
+		fixup_smp((void *)s->sh_addr, s->sh_size);
 	return 0;
 }
 

arch/arm/kernel/perf_event.c

@@ -700,7 +700,7 @@ user_backtrace(struct frame_tail __user *tail,
 	 * Frame pointers should strictly progress back up the stack
 	 * (towards higher addresses).
 	 */
-	if (tail >= buftail.fp)
+	if (tail + 1 >= buftail.fp)
 		return NULL;
 
 	return buftail.fp - 1;

arch/arm/mach-pxa/colibri-evalboard.c

@@ -50,7 +50,7 @@ static void __init colibri_mmc_init(void)
 			GPIO0_COLIBRI_PXA270_SD_DETECT;
 	if (machine_is_colibri300())	/* PXA300 Colibri */
 		colibri_mci_platform_data.gpio_card_detect =
-			GPIO39_COLIBRI_PXA300_SD_DETECT;
+			GPIO13_COLIBRI_PXA300_SD_DETECT;
 	else				/* PXA320 Colibri */
 		colibri_mci_platform_data.gpio_card_detect =
 			GPIO28_COLIBRI_PXA320_SD_DETECT;

arch/arm/mach-pxa/colibri-pxa300.c

@@ -41,7 +41,7 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
 	GPIO4_MMC1_DAT1,
 	GPIO5_MMC1_DAT2,
 	GPIO6_MMC1_DAT3,
-	GPIO39_GPIO,	/* SD detect */
+	GPIO13_GPIO,	/* GPIO13_COLIBRI_PXA300_SD_DETECT */
 
 	/* UHC */
 	GPIO0_2_USBH_PEN,

arch/arm/mach-pxa/include/mach/colibri.h

@@ -60,7 +60,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 #define GPIO113_COLIBRI_PXA270_TS_IRQ	113
 
 /* GPIO definitions for Colibri PXA300/310 */
-#define GPIO39_COLIBRI_PXA300_SD_DETECT	39
+#define GPIO13_COLIBRI_PXA300_SD_DETECT	13
 
 /* GPIO definitions for Colibri PXA320 */
 #define GPIO28_COLIBRI_PXA320_SD_DETECT	28

arch/arm/mach-pxa/palm27x.c

@@ -323,7 +323,7 @@ static struct platform_pwm_backlight_data palm27x_backlight_data = {
 	.pwm_id		= 0,
 	.max_brightness	= 0xfe,
 	.dft_brightness	= 0x7e,
-	.pwm_period_ns	= 3500,
+	.pwm_period_ns	= 3500 * 1024,
 	.init		= palm27x_backlight_init,
 	.notify		= palm27x_backlight_notify,
 	.exit		= palm27x_backlight_exit,

arch/arm/mach-pxa/pm.c

@@ -33,7 +33,7 @@ int pxa_pm_enter(suspend_state_t state)
 #endif
 
 	/* skip registers saving for standby */
-	if (state != PM_SUSPEND_STANDBY) {
+	if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) {
 		pxa_cpu_pm_fns->save(sleep_save);
 		/* before sleeping, calculate and save a checksum */
 		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
@@ -44,7 +44,7 @@ int pxa_pm_enter(suspend_state_t state)
 	pxa_cpu_pm_fns->enter(state);
 	cpu_init();
 
-	if (state != PM_SUSPEND_STANDBY) {
+	if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
 		/* after sleeping, validate the checksum */
 		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
 			checksum += sleep_save[i];

arch/arm/mach-s5pv310/Kconfig

@@ -122,6 +122,7 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S5PV310_DEV_PD
+	select S5PV310_DEV_SYSMMU
 	select S5PV310_SETUP_I2C1
 	select S5PV310_SETUP_SDHCI
 	help

arch/arm/mach-s5pv310/include/mach/map.h

@@ -124,8 +124,6 @@
 #define S5PV310_PA_SYSMMU_TV		0x12E20000
 #define S5PV310_PA_SYSMMU_MFC_L		0x13620000
 #define S5PV310_PA_SYSMMU_MFC_R		0x13630000
-#define S5PV310_SYSMMU_TOTAL_IPNUM	16
-#define S5P_SYSMMU_TOTAL_IPNUM		S5PV310_SYSMMU_TOTAL_IPNUM
 
 /* compatibiltiy defines. */
 #define S3C_PA_UART			S5PV310_PA_UART

arch/arm/mach-s5pv310/include/mach/sysmmu.h

@@ -13,6 +13,9 @@
 #ifndef __ASM_ARM_ARCH_SYSMMU_H
 #define __ASM_ARM_ARCH_SYSMMU_H __FILE__
 
+#define S5PV310_SYSMMU_TOTAL_IPNUM	16
+#define S5P_SYSMMU_TOTAL_IPNUM		S5PV310_SYSMMU_TOTAL_IPNUM
+
 enum s5pv310_sysmmu_ips {
 	SYSMMU_MDMA,
 	SYSMMU_SSS,
@@ -32,7 +35,7 @@ enum s5pv310_sysmmu_ips {
 	SYSMMU_MFC_R,
 };
 
-static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = {
+static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = {
 	"SYSMMU_MDMA"	,
 	"SYSMMU_SSS"	,
 	"SYSMMU_FIMC0"	,

arch/arm/mach-sa1100/collie.c

@@ -241,6 +241,9 @@ static struct locomo_platform_data locomo_info = {
 struct platform_device collie_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
+	.dev		= {
+		.platform_data	= &locomo_info,
+	},
 	.num_resources	= ARRAY_SIZE(locomo_resources),
 	.resource	= locomo_resources,
 };

arch/arm/mm/Kconfig

@@ -405,7 +405,7 @@ config CPU_V6
 config CPU_32v6K
 	bool "Support ARM V6K processor extensions" if !SMP
 	depends on CPU_V6 || CPU_V7
-	default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
+	default y if SMP
 	help
 	  Say Y here if your ARMv6 processor supports the 'K' extension.
 	  This enables the kernel to use some instructions not present
@@ -416,7 +416,7 @@ config CPU_32v6K
 # ARMv7
 config CPU_V7
 	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
-	select CPU_32v6K if !ARCH_OMAP2
+	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
 	select CPU_PABRT_V7
@@ -644,7 +644,7 @@ config ARM_THUMBEE
 
 config SWP_EMULATE
 	bool "Emulate SWP/SWPB instructions"
-	depends on CPU_V7 && !CPU_V6
+	depends on !CPU_USE_DOMAINS && CPU_V7 && !CPU_V6
 	select HAVE_PROC_CPU if PROC_FS
 	default y if SMP
 	help

arch/arm/oprofile/common.c

@@ -10,8 +10,6 @@
  */
 
 #include <linux/cpumask.h>
-#include <linux/err.h>
-#include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/oprofile.h>
@@ -46,6 +44,7 @@ char *op_name_from_perf_id(void)
 		return NULL;
 	}
 }
+#endif
 
 static int report_trace(struct stackframe *frame, void *d)
 {
@@ -85,7 +84,7 @@ static struct frame_tail* user_backtrace(struct frame_tail *tail)
 
 	/* frame pointers should strictly progress back up the stack
 	 * (towards higher addresses) */
-	if (tail >= buftail[0].fp)
+	if (tail + 1 >= buftail[0].fp)
 		return NULL;
 
 	return buftail[0].fp-1;
@@ -111,6 +110,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 
 int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
+	/* provide backtrace support also in timer mode: */
 	ops->backtrace		= arm_backtrace;
 
 	return oprofile_perf_init(ops);
@@ -120,11 +120,3 @@ void __exit oprofile_arch_exit(void)
 {
 	oprofile_perf_exit();
 }
-#else
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	pr_info("oprofile: hardware counters not available\n");
-	return -ENODEV;
-}
-void __exit oprofile_arch_exit(void) {}
-#endif /* CONFIG_HW_PERF_EVENTS */

arch/arm/plat-pxa/mfp.c

@@ -139,10 +139,11 @@ static const unsigned long mfpr_edge[] = {
 #define mfp_configured(p)	((p)->config != -1)
 
 /*
- * perform a read-back of any MFPR register to make sure the
+ * perform a read-back of any valid MFPR register to make sure the
  * previous writings are finished
  */
-#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + 0)
+static unsigned long mfpr_off_readback;
+#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
 
 static inline void __mfp_config_run(struct mfp_pin *p)
 {
@@ -248,6 +249,9 @@ void __init mfp_init_addr(struct mfp_addr_map *map)
 
 	spin_lock_irqsave(&mfp_spin_lock, flags);
 
+	/* mfp offset for readback */
+	mfpr_off_readback = map[0].offset;
+
 	for (p = map; p->start != MFP_PIN_INVALID; p++) {
 		offset = p->offset;
 		i = p->start;

arch/arm/plat-s5p/Kconfig

@@ -37,6 +37,14 @@ config S5P_GPIO_INT
 	help
 	  Common code for the GPIO interrupts (other than external interrupts.)
 
+comment "System MMU"
+
+config S5P_SYSTEM_MMU
+	bool "S5P SYSTEM MMU"
+	depends on ARCH_S5PV310
+	help
+	  Say Y here if you want to enable System MMU
+
 config S5P_DEV_FIMC0
 	bool
 	help
@@ -66,19 +74,3 @@ config S5P_DEV_CSIS1
 	bool
 	help
 	  Compile in platform device definitions for MIPI-CSIS channel 1
-
-menuconfig S5P_SYSMMU
-	bool "SYSMMU support"
-	depends on ARCH_S5PV310
-	help
-	  This is a System MMU driver for Samsung ARM based Soc.
-
-if S5P_SYSMMU
-
-config S5P_SYSMMU_DEBUG
-	bool "Enables debug messages"
-	depends on S5P_SYSMMU
-	help
-	  This enables SYSMMU driver debug massages.
-
-endif

arch/arm/plat-s5p/Makefile

@@ -19,6 +19,7 @@ obj-y				+= clock.o
 obj-y				+= irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 obj-$(CONFIG_S5P_GPIO_INT)	+= irq-gpioint.o
+obj-$(CONFIG_S5P_SYSTEM_MMU)	+= sysmmu.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 
@@ -30,4 +31,3 @@ obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
 obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
 obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o
-obj-$(CONFIG_S5P_SYSMMU)	+= sysmmu.o

arch/arm/plat-s5p/include/plat/sysmmu.h

-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Samsung sysmmu driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_SYSMMU_H
-#define __ASM_PLAT_S5P_SYSMMU_H __FILE__
-
-/* debug macro */
-#ifdef CONFIG_S5P_SYSMMU_DEBUG
-#define sysmmu_debug(fmt, arg...)	printk(KERN_INFO "[%s] " fmt, __func__, ## arg)
-#else
-#define sysmmu_debug(fmt, arg...)	do { } while (0)
-#endif
-
-#endif /* __ASM_PLAT_S5P_SYSMMU_H */

arch/arm/plat-s5p/sysmmu.c

@@ -16,8 +16,6 @@
 #include <mach/regs-sysmmu.h>
 #include <mach/sysmmu.h>
 
-#include <plat/sysmmu.h>
-
 struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM];
 
 void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp)
@@ -123,7 +121,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips)
 		: "=r" (pg) : : "cc");		\
 		pg &= ~0x3fff;
 
-	sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg);
+	printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg);
 
 	/* Set sysmmu page table base address */
 	__raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR);

arch/arm/plat-samsung/include/plat/pm.h

@@ -17,6 +17,8 @@
 
 #include <linux/irq.h>
 
+struct sys_device;
+
 #ifdef CONFIG_PM
 
 extern __init int s3c_pm_init(void);

arch/blackfin/include/asm/bfin_serial.h

@@ -10,6 +10,7 @@
 #define __BFIN_ASM_SERIAL_H__
 
 #include <linux/serial_core.h>
+#include <linux/spinlock.h>
 #include <mach/anomaly.h>
 #include <mach/bfin_serial.h>
 
@@ -41,6 +42,7 @@ struct bfin_serial_port {
 	struct circ_buf rx_dma_buf;
 	struct timer_list rx_dma_timer;
 	int rx_dma_nrows;
+	spinlock_t rx_lock;
 	unsigned int tx_dma_channel;
 	unsigned int rx_dma_channel;
 	struct work_struct tx_dma_workqueue;

arch/m68k/include/asm/string.h

@@ -99,14 +99,12 @@ static inline int strcmp(const char *cs, const char *ct)
 		: "+a" (cs), "+a" (ct), "=d" (res));
 	return res;
 }
+#endif /* CONFIG_COLDFIRE */
 
 #define __HAVE_ARCH_MEMMOVE
 extern void *memmove(void *, const void *, __kernel_size_t);
 
-#define __HAVE_ARCH_MEMCMP
-extern int memcmp(const void *, const void *, __kernel_size_t);
 #define memcmp(d, s, n) __builtin_memcmp(d, s, n)
-#endif /* CONFIG_COLDFIRE */
 
 #define __HAVE_ARCH_MEMSET
 extern void *memset(void *, int, __kernel_size_t);

arch/m68k/lib/string.c

@@ -243,14 +243,3 @@ void *memmove(void *dest, const void *src, size_t n)
 	return xdest;
 }
 EXPORT_SYMBOL(memmove);
-
-int memcmp(const void *cs, const void *ct, size_t count)
-{
-	const unsigned char *su1, *su2;
-
-	for (su1 = cs, su2 = ct; count > 0; ++su1, ++su2, count--)
-		if (*su1 != *su2)
-			return *su1 < *su2 ? -1 : +1;
-	return 0;
-}
-EXPORT_SYMBOL(memcmp);

arch/m68knommu/kernel/vmlinux.lds.S

@@ -141,6 +141,12 @@ SECTIONS {
 		*(__param)
 		__stop___param = .;
 
+		/* Built-in module versions */
+		. = ALIGN(4) ;
+		__start___modver = .;
+		*(__modver)
+		__stop___modver = .;
+
 		. = ALIGN(4) ;
 		_etext = . ;
 	} > TEXT

arch/m68knommu/lib/Makefile

@@ -4,4 +4,4 @@
 
 lib-y	:= ashldi3.o ashrdi3.o lshrdi3.o \
 	   muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
-	   checksum.o memcpy.o memset.o delay.o
+	   checksum.o memcpy.o memmove.o memset.o delay.o

arch/m68knommu/lib/memmove.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#define __IN_STRING_C
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+void *memmove(void *dest, const void *src, size_t n)
+{
+	void *xdest = dest;
+	size_t temp;
+
+	if (!n)
+		return xdest;
+
+	if (dest < src) {
+		if ((long)dest & 1) {
+			char *cdest = dest;
+			const char *csrc = src;
+			*cdest++ = *csrc++;
+			dest = cdest;
+			src = csrc;
+			n--;
+		}
+		if (n > 2 && (long)dest & 2) {
+			short *sdest = dest;
+			const short *ssrc = src;
+			*sdest++ = *ssrc++;
+			dest = sdest;
+			src = ssrc;
+			n -= 2;
+		}
+		temp = n >> 2;
+		if (temp) {
+			long *ldest = dest;
+			const long *lsrc = src;
+			temp--;
+			do
+				*ldest++ = *lsrc++;
+			while (temp--);
+			dest = ldest;
+			src = lsrc;
+		}
+		if (n & 2) {
+			short *sdest = dest;
+			const short *ssrc = src;
+			*sdest++ = *ssrc++;
+			dest = sdest;
+			src = ssrc;
+		}
+		if (n & 1) {
+			char *cdest = dest;
+			const char *csrc = src;
+			*cdest = *csrc;
+		}
+	} else {
+		dest = (char *)dest + n;
+		src = (const char *)src + n;
+		if ((long)dest & 1) {
+			char *cdest = dest;
+			const char *csrc = src;
+			*--cdest = *--csrc;
+			dest = cdest;
+			src = csrc;
+			n--;
+		}
+		if (n > 2 && (long)dest & 2) {
+			short *sdest = dest;
+			const short *ssrc = src;
+			*--sdest = *--ssrc;
+			dest = sdest;
+			src = ssrc;
+			n -= 2;
+		}
+		temp = n >> 2;
+		if (temp) {
+			long *ldest = dest;
+			const long *lsrc = src;
+			temp--;
+			do
+				*--ldest = *--lsrc;
+			while (temp--);
+			dest = ldest;
+			src = lsrc;
+		}
+		if (n & 2) {
+			short *sdest = dest;
+			const short *ssrc = src;
+			*--sdest = *--ssrc;
+			dest = sdest;
+			src = ssrc;
+		}
+		if (n & 1) {
+			char *cdest = dest;
+			const char *csrc = src;
+			*--cdest = *--csrc;
+		}
+	}
+	return xdest;
+}
+EXPORT_SYMBOL(memmove);

arch/m68knommu/platform/5249/intc2.c

@@ -50,8 +50,10 @@ static int __init mcf_intc2_init(void)
 	int irq;
 
 	/* GPIO interrupt sources */
-	for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++)
+	for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) {
 		irq_desc[irq].chip = &intc2_irq_gpio_chip;
+		set_irq_handler(irq, handle_edge_irq);
+	}
 
 	return 0;
 }

arch/m68knommu/platform/68328/entry.S

@@ -108,7 +108,6 @@ Luser_return:
 	movel	%d1,%a2
 1:
 	move	%a2@(TI_FLAGS),%d1	/* thread_info->flags */
-	andl	#_TIF_WORK_MASK,%d1
 	jne	Lwork_to_do
 	RESTORE_ALL
 

arch/m68knommu/platform/68360/commproc.c

@@ -210,7 +210,7 @@ void
 cpm_install_handler(int vec, void (*handler)(), void *dev_id)
 {
 
-	request_irq(vec, handler, IRQ_FLG_LOCK, "timer", dev_id);
+	request_irq(vec, handler, 0, "timer", dev_id);
 
 /* 	if (cpm_vecs[vec].handler != 0) */
 /* 		printk(KERN_INFO "CPM interrupt %x replacing %x\n", */

arch/m68knommu/platform/68360/config.c

@@ -75,7 +75,7 @@ void hw_timer_init(void)
   /* Set compare register  32Khz / 32 / 10 = 100 */
   TCMP = 10;                                                              
 
-  request_irq(IRQ_MACHSPEC | 1, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
+  request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL);
 #endif
 
   /* General purpose quicc timers: MC68360UM p7-20 */

arch/m68knommu/platform/68360/entry.S

@@ -104,7 +104,6 @@ Luser_return:
 	movel	%d1,%a2
 1:
 	move	%a2@(TI_FLAGS),%d1	/* thread_info->flags */
-	andl	#_TIF_WORK_MASK,%d1
 	jne	Lwork_to_do
 	RESTORE_ALL
 

arch/m68knommu/platform/68360/ints.c

@@ -132,8 +132,8 @@ void init_IRQ(void)
 	pquicc->intr_cimr = 0x00000000;
 
 	for (i = 0; (i < NR_IRQS); i++) {
-		set_irq_chip(irq, &intc_irq_chip);
-		set_irq_handler(irq, handle_level_irq);
+		set_irq_chip(i, &intc_irq_chip);
+		set_irq_handler(i, handle_level_irq);
 	}
 }
 

arch/m68knommu/platform/coldfire/entry.S

@@ -138,7 +138,6 @@ Luser_return:
 	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
 	movel	%d1,%a0
 	movel	%a0@(TI_FLAGS),%d1	/* get thread_info->flags */
-	andl	#0xefff,%d1
 	jne	Lwork_to_do		/* still work to do */
 
 Lreturn: