scsi: ufs: Remove the TRUE and FALSE definitions

In the Linux kernel coding style document
(Documentation/process/coding-style.rst) it is recommended to use the type
'bool' and also the values 'true' and 'false'. Hence this patch that
removes the definitions and uses of TRUE and FALSE from the UFS driver.

Link: https://lore.kernel.org/r/20220419225811.4127248-20-bvanassche@acm.orgTested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/ufs/ufs-exynos.c

@@ -704,7 +704,7 @@ static void exynos_ufs_establish_connt(struct exynos_ufs *ufs)
 
 	/* local unipro attributes */
 	ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID), DEV_ID);
-	ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID_VALID), TRUE);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID_VALID), true);
 	ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERDEVICEID), PEER_DEV_ID);
 	ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERCPORTID), PEER_CPORT_ID);
 	ufshcd_dme_set(hba, UIC_ARG_MIB(T_CPORTFLAGS), CPORT_DEF_FLAGS);
@@ -1028,7 +1028,7 @@ static int exynos_ufs_post_link(struct ufs_hba *hba)
 
 	if (ufs->opts & EXYNOS_UFS_OPT_SKIP_CONNECTION_ESTAB)
 		ufshcd_dme_set(hba,
-			UIC_ARG_MIB(T_DBG_SKIP_INIT_HIBERN8_EXIT), TRUE);
+			UIC_ARG_MIB(T_DBG_SKIP_INIT_HIBERN8_EXIT), true);
 
 	if (attr->pa_granularity) {
 		exynos_ufs_enable_dbg_mode(hba);

drivers/scsi/ufs/ufs-exynos.h

@@ -248,22 +248,22 @@ long exynos_ufs_calc_time_cntr(struct exynos_ufs *, long);
 
 static inline void exynos_ufs_enable_ov_tm(struct ufs_hba *hba)
 {
-	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OV_TM), TRUE);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OV_TM), true);
 }
 
 static inline void exynos_ufs_disable_ov_tm(struct ufs_hba *hba)
 {
-	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OV_TM), FALSE);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_OV_TM), false);
 }
 
 static inline void exynos_ufs_enable_dbg_mode(struct ufs_hba *hba)
 {
-	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_MODE), TRUE);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_MODE), true);
 }
 
 static inline void exynos_ufs_disable_dbg_mode(struct ufs_hba *hba)
 {
-	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_MODE), FALSE);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_DBG_MODE), false);
 }
 
 #endif /* _UFS_EXYNOS_H_ */

drivers/scsi/ufs/ufshcd.c

@@ -4325,18 +4325,18 @@ static int ufshcd_change_power_mode(struct ufs_hba *hba,
 			pwr_mode->lane_rx);
 	if (pwr_mode->pwr_rx == FASTAUTO_MODE ||
 			pwr_mode->pwr_rx == FAST_MODE)
-		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), true);
 	else
-		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), FALSE);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), false);
 
 	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx);
 	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES),
 			pwr_mode->lane_tx);
 	if (pwr_mode->pwr_tx == FASTAUTO_MODE ||
 			pwr_mode->pwr_tx == FAST_MODE)
-		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), true);
 	else
-		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), FALSE);
+		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), false);
 
 	if (pwr_mode->pwr_rx == FASTAUTO_MODE ||
 	    pwr_mode->pwr_tx == FASTAUTO_MODE ||

drivers/scsi/ufs/unipro.h

@@ -298,20 +298,6 @@ enum ufs_unipro_ver {
 #define T_TC0TXMAXSDUSIZE	0x4060
 #define T_TC1TXMAXSDUSIZE	0x4061
 
-#ifdef FALSE
-#undef FALSE
-#endif
-
-#ifdef TRUE
-#undef TRUE
-#endif
-
-/* Boolean attribute values */
-enum {
-	FALSE = 0,
-	TRUE,
-};
-
 /* CPort setting */
 #define E2EFC_ON	(1 << 0)
 #define E2EFC_OFF	(0 << 0)