Merge tag 'renesas-dt-for-v4.4' of...

Merge tag 'renesas-dt-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Updates for v4.4" from Simon Horman:

* Add missing CPG/MSTP Clock Domain for sound on r8a779[01] SoCs
* Tidy up SCI resource region on r8a779[018] SoCs
* Add pinmux for iic0 on Lager board
* Use CCF for audio clock on Lager and Koelsch boards
* Use serial0 and 1 as serial ports on Marzen board
* Use adxl345-specific compatible property for KZM9G board
* Document compat string for Silk board
* Enable GPIO, I2C, PCI, QSPI, USB PHY and HS, and VIN support on r8a7794/Silk
* Add initial support for r8a7791/porter
* Add common file for AA121TD01 panel

* tag 'renesas-dt-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (28 commits)
  ARM: shmobile: porter: add Ether DT support
  ARM: shmobile: fix SILK board name
  ARM: shmobile: r8a7794: add HS-USB DT support
  ARM: shmobile: dts: Add common file for AA121TD01 panel
  ARM: shmobile: r8a7794: link PCI USB devices to USB PHY
  ARM: shmobile: silk: enable USB PHY
  ARM: shmobile: r8a7794: add USB PHY DT support
  ARM: shmobile: porter: initial device tree
  ARM: shmobile: add Porter board DT bindings
  ARM: shmobile: silk: enable internal PCI
  ARM: shmobile: r8a7794: add internal PCI bridge nodes
  ARM: shmobile: r8a7790: lager: add pinmux for iic0
  ARM: shmobile: r8a7778: tidyup SSI resource region
  ARM: shmobile: r8a7791: tidyup SSI resource region
  ARM: shmobile: r8a7790: tidyup SSI resource region
  ARM: shmobile: lager: use CCF for audio clock
  ARM: shmobile: koelsch: use CCF for audio clock
  ARM: shmobile: silk: add VIN0/ADV7180 DT support
  ARM: shmobile: r8a7794: add VIN DT support
  ARM: shmobile: silk: add I2C1 DT support
  ...

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -55,3 +55,7 @@ Boards:
     compatible = "renesas,lager", "renesas,r8a7790"
   - Marzen
     compatible = "renesas,marzen", "renesas,r8a7779"
+  - Porter (M2-LCDP)
+    compatible = "renesas,porter", "renesas,r8a7791"
+  - SILK (RTP0RC7794LCB00011S)
+    compatible = "renesas,silk", "renesas,r8a7794"

arch/arm/boot/dts/Makefile

@@ -532,6 +532,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7790-lager.dtb \
 	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
+	r8a7791-porter.dtb \
 	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \

arch/arm/boot/dts/r8a7778.dtsi

@@ -239,7 +239,7 @@ rcar_sound: sound@ffd90000 {
 		#sound-dai-cells = <1>;
 		compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
 		reg =	<0xffd90000 0x1000>,	/* SRU */
-			<0xffd91000 0x1240>,	/* SSI */
+			<0xffd91000 0x240>,	/* SSI */
 			<0xfffe0000 0x24>;	/* ADG */
 		clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
 			<&mstp3_clks R8A7778_CLK_SSI7>,

arch/arm/boot/dts/r8a7779-marzen.dts

@@ -19,12 +19,12 @@ / {
 	compatible = "renesas,marzen", "renesas,r8a7779";
 
 	aliases {
-		serial2 = &scif2;
-		serial4 = &scif4;
+		serial0 = &scif2;
+		serial1 = &scif4;
 	};
 
 	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
+		bootargs = "ignore_loglevel root=/dev/nfs ip=on";
 		stdout-path = &scif2;
 	};
 

arch/arm/boot/dts/r8a7790-lager.dts

@@ -174,6 +174,13 @@ vccq_sdhi2: regulator@4 {
 			  1800000 0>;
 	};
 
+	audio_clock: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-output-names = "audio_clock";
+	};
+
 	rsnd_ak4643: sound {
 		compatible = "simple-audio-card";
 
@@ -187,7 +194,7 @@ sndcpu: simple-audio-card,cpu {
 
 		sndcodec: simple-audio-card,codec {
 			sound-dai = <&ak4643>;
-			system-clock-frequency = <11289600>;
+			clocks = <&audio_clock>;
 		};
 	};
 
@@ -335,6 +342,11 @@ msiof1_pins: spi2 {
 		renesas,function = "msiof1";
 	};
 
+	iic0_pins: iic0 {
+		renesas,groups = "iic0";
+		renesas,function = "iic0";
+	};
+
 	iic1_pins: iic1 {
 		renesas,groups = "iic1";
 		renesas,function = "iic1";
@@ -510,6 +522,8 @@ &cpu0 {
 
 &iic0	{
 	status = "okay";
+	pinctrl-0 = <&iic0_pins>;
+	pinctrl-names = "default";
 };
 
 &iic1	{

arch/arm/boot/dts/r8a7790.dtsi

@@ -1599,7 +1599,7 @@ rcar_sound: sound@ec500000 {
 		reg =	<0 0xec500000 0 0x1000>, /* SCU */
 			<0 0xec5a0000 0 0x100>,  /* ADG */
 			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>, /* SSI */
+			<0 0xec541000 0 0x280>,  /* SSI */
 			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
 		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -242,6 +242,13 @@ vccq_sdhi2: regulator@5 {
 			  1800000 0>;
 	};
 
+	audio_clock: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-output-names = "audio_clock";
+	};
+
 	rsnd_ak4643: sound {
 		compatible = "simple-audio-card";
 
@@ -255,7 +262,7 @@ sndcpu: simple-audio-card,cpu {
 
 		sndcodec: simple-audio-card,codec {
 			sound-dai = <&ak4643>;
-			system-clock-frequency = <11289600>;
+			clocks = <&audio_clock>;
 		};
 	};
 

arch/arm/boot/dts/r8a7791-porter.dts

+/*
+ * Device Tree Source for the Porter board
+ *
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+
+/ {
+	model = "Porter";
+	compatible = "renesas,porter", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_d";
+		renesas,function = "scif0";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "ok";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};

arch/arm/boot/dts/r8a7791.dtsi

@@ -1649,7 +1649,7 @@ rcar_sound: sound@ec500000 {
 		reg =	<0 0xec500000 0 0x1000>, /* SCU */
 			<0 0xec5a0000 0 0x100>,  /* ADG */
 			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>, /* SSI */
+			<0 0xec541000 0 0x280>,  /* SSI */
 			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
 		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 

arch/arm/boot/dts/r8a7794-silk.dts

@@ -61,10 +61,35 @@ phy1_pins: phy1 {
 		renesas,function = "intc";
 	};
 
+	i2c1_pins: i2c1 {
+		renesas,groups = "i2c1";
+		renesas,function = "i2c1";
+	};
+
 	mmcif0_pins: mmcif0 {
 		renesas,groups = "mmc_data8", "mmc_ctrl";
 		renesas,function = "mmc";
 	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
 };
 
 &scif2 {
@@ -90,6 +115,27 @@ phy1: ethernet-phy@1 {
 	};
 };
 
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
+};
+
 &mmcif0 {
 	pinctrl-0 = <&mmcif0_pins>;
 	pinctrl-names = "default";
@@ -100,3 +146,71 @@ &mmcif0 {
 	non-removable;
 	status = "okay";
 };
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader";
+			reg = <0x00000000 0x00040000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "user";
+			reg = <0x00040000 0x00400000>;
+			read-only;
+		};
+		partition@440000 {
+			label = "flash";
+			reg = <0x00440000 0x03bc0000>;
+		};
+	};
+};
+
+/* composite video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&usbphy {
+	status = "okay";
+};

arch/arm/boot/dts/r8a7794.dtsi

@@ -19,6 +19,18 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		spi0 = &qspi;
+		vin0 = &vin0;
+		vin1 = &vin1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -50,6 +62,97 @@ gic: interrupt-controller@f1001000 {
 		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	gpio0: gpio@e6050000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6050000 0 0x50>;
+		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO0>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio1: gpio@e6051000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6051000 0 0x50>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO1>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio2: gpio@e6052000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6052000 0 0x50>;
+		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO2>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio3: gpio@e6053000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6053000 0 0x50>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO3>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio4: gpio@e6054000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6054000 0 0x50>;
+		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO4>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio5: gpio@e6055000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6055000 0 0x50>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 28>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio6: gpio@e6055400 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6055400 0 0x50>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO6>;
+		power-domains = <&cpg_clocks>;
+	};
+
 	cmt0: timer@ffca0000 {
 		compatible = "renesas,cmt-48-gen2";
 		reg = <0 0xffca0000 0 0x1004>;
@@ -407,6 +510,73 @@ ether: ethernet@ee700000 {
 		status = "disabled";
 	};
 
+	/* The memory map in the User's Manual maps the cores to bus numbers */
+	i2c0: i2c@e6508000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6520000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6520000 0 0x40>;
+		interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@e6528000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6528000 0 0x40>;
+		interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	mmcif0: mmc@ee200000 {
 		compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
@@ -446,6 +616,140 @@ sdhi2: sd@ee160000 {
 		status = "disabled";
 	};
 
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7794", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7794";
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7794";
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	pci0: pci@ee090000 {
+		compatible = "renesas,pci-r8a7794";
+		device_type = "pci";
+		reg = <0 0xee090000 0 0xc00>,
+		      <0 0xee080000 0 0x1100>;
+		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+
+		bus-range = <0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+	};
+
+	pci1: pci@ee0d0000 {
+		compatible = "renesas,pci-r8a7794";
+		device_type = "pci";
+		reg = <0 0xee0d0000 0 0xc00>,
+		      <0 0xee0c0000 0 0x1100>;
+		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+
+		bus-range = <1 1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+	};
+
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7794";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		power-domains = <&cpg_clocks>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@e6590100 {
+		compatible = "renesas,usb-phy-r8a7794";
+		reg = <0 0xe6590100 0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		clock-names = "usbhs";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+
+		usb0: usb-channel@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+		usb2: usb-channel@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -749,16 +1053,22 @@ R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
 				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
-			clock-indices = <
-				R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
-				R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
-				R8A7794_CLK_I2C0
-			>;
+			clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
+					 R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
+					 R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
+					 R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD
+					 R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+					 R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
+					 R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
 			clock-output-names =
-				"qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+				"gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
+				"gpio1", "gpio0", "qspi_mod",
+				"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
 		};
 		mstp11_clks: mstp11_clks@e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";

arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi

+/*
+ * Common file for the AA121TD01 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	panel {
+		compatible = "mitsubishi,aa121td01", "panel-dpi";
+
+		width-mm = <261>;
+		height-mm = <163>;
+
+		panel-timing {
+			/* 1280x800 @60Hz */
+			clock-frequency = <71000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hsync-len = <70>;
+			hfront-porch = <20>;
+			hback-porch = <70>;
+			vsync-len = <5>;
+			vfront-porch = <3>;
+			vback-porch = <15>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};

arch/arm/boot/dts/sh73a0-kzm9g.dts

@@ -206,7 +206,7 @@ ak4648: codec@12 {
 	};
 
 	accelerometer@1d {
-		compatible = "adi,adxl34x";
+		compatible = "adi,adxl345";
 		reg = <0x1d>;
 		interrupt-parent = <&irqpin3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,