Commit 22577609 authored by David S. Miller's avatar David S. Miller

Merge branch 'sh_eth'

Ben Hutchings says:

====================
Fixes for sh_eth #3

I'm continuing review and testing of Ethernet support on the R-Car H2
chip.  This series fixes the last of the more serious issues I've found.

These are not tested on any of the other supported chips.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 8d8d67f1 52b9fa36
......@@ -396,6 +396,9 @@ static const u16 sh_eth_offset_fast_sh3_sh2[SH_ETH_MAX_REGISTER_OFFSET] = {
[TSU_ADRL31] = 0x01fc,
};
static void sh_eth_rcv_snd_disable(struct net_device *ndev);
static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev);
static bool sh_eth_is_gether(struct sh_eth_private *mdp)
{
return mdp->reg_offset == sh_eth_offset_gigabit;
......@@ -1120,6 +1123,7 @@ static void sh_eth_ring_format(struct net_device *ndev)
int rx_ringsize = sizeof(*rxdesc) * mdp->num_rx_ring;
int tx_ringsize = sizeof(*txdesc) * mdp->num_tx_ring;
int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
dma_addr_t dma_addr;
mdp->cur_rx = 0;
mdp->cur_tx = 0;
......@@ -1133,7 +1137,6 @@ static void sh_eth_ring_format(struct net_device *ndev)
/* skb */
mdp->rx_skbuff[i] = NULL;
skb = netdev_alloc_skb(ndev, skbuff_size);
mdp->rx_skbuff[i] = skb;
if (skb == NULL)
break;
sh_eth_set_receive_align(skb);
......@@ -1142,9 +1145,15 @@ static void sh_eth_ring_format(struct net_device *ndev)
rxdesc = &mdp->rx_ring[i];
/* The size of the buffer is a multiple of 16 bytes. */
rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
dma_map_single(&ndev->dev, skb->data, rxdesc->buffer_length,
DMA_FROM_DEVICE);
rxdesc->addr = virt_to_phys(skb->data);
dma_addr = dma_map_single(&ndev->dev, skb->data,
rxdesc->buffer_length,
DMA_FROM_DEVICE);
if (dma_mapping_error(&ndev->dev, dma_addr)) {
kfree_skb(skb);
break;
}
mdp->rx_skbuff[i] = skb;
rxdesc->addr = dma_addr;
rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
/* Rx descriptor address set */
......@@ -1358,6 +1367,33 @@ static int sh_eth_dev_init(struct net_device *ndev, bool start)
return ret;
}
static void sh_eth_dev_exit(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int i;
/* Deactivate all TX descriptors, so DMA should stop at next
* packet boundary if it's currently running
*/
for (i = 0; i < mdp->num_tx_ring; i++)
mdp->tx_ring[i].status &= ~cpu_to_edmac(mdp, TD_TACT);
/* Disable TX FIFO egress to MAC */
sh_eth_rcv_snd_disable(ndev);
/* Stop RX DMA at next packet boundary */
sh_eth_write(ndev, 0, EDRRR);
/* Aside from TX DMA, we can't tell when the hardware is
* really stopped, so we need to reset to make sure.
* Before doing that, wait for long enough to *probably*
* finish transmitting the last packet and poll stats.
*/
msleep(2); /* max frame time at 10 Mbps < 1250 us */
sh_eth_get_stats(ndev);
sh_eth_reset(ndev);
}
/* free Tx skb function */
static int sh_eth_txfree(struct net_device *ndev)
{
......@@ -1402,6 +1438,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
u16 pkt_len = 0;
u32 desc_status;
int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
dma_addr_t dma_addr;
boguscnt = min(boguscnt, *quota);
limit = boguscnt;
......@@ -1449,9 +1486,9 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
mdp->rx_skbuff[entry] = NULL;
if (mdp->cd->rpadir)
skb_reserve(skb, NET_IP_ALIGN);
dma_sync_single_for_cpu(&ndev->dev, rxdesc->addr,
ALIGN(mdp->rx_buf_sz, 16),
DMA_FROM_DEVICE);
dma_unmap_single(&ndev->dev, rxdesc->addr,
ALIGN(mdp->rx_buf_sz, 16),
DMA_FROM_DEVICE);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, ndev);
netif_receive_skb(skb);
......@@ -1471,15 +1508,20 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
if (mdp->rx_skbuff[entry] == NULL) {
skb = netdev_alloc_skb(ndev, skbuff_size);
mdp->rx_skbuff[entry] = skb;
if (skb == NULL)
break; /* Better luck next round. */
sh_eth_set_receive_align(skb);
dma_map_single(&ndev->dev, skb->data,
rxdesc->buffer_length, DMA_FROM_DEVICE);
dma_addr = dma_map_single(&ndev->dev, skb->data,
rxdesc->buffer_length,
DMA_FROM_DEVICE);
if (dma_mapping_error(&ndev->dev, dma_addr)) {
kfree_skb(skb);
break;
}
mdp->rx_skbuff[entry] = skb;
skb_checksum_none_assert(skb);
rxdesc->addr = virt_to_phys(skb->data);
rxdesc->addr = dma_addr;
}
if (entry >= mdp->num_rx_ring - 1)
rxdesc->status |=
......@@ -1575,7 +1617,6 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
if (intr_status & EESR_RFRMER) {
/* Receive Frame Overflow int */
ndev->stats.rx_frame_errors++;
netif_err(mdp, rx_err, ndev, "Receive Abort\n");
}
}
......@@ -1594,13 +1635,11 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
if (intr_status & EESR_RDE) {
/* Receive Descriptor Empty int */
ndev->stats.rx_over_errors++;
netif_err(mdp, rx_err, ndev, "Receive Descriptor Empty\n");
}
if (intr_status & EESR_RFE) {
/* Receive FIFO Overflow int */
ndev->stats.rx_fifo_errors++;
netif_err(mdp, rx_err, ndev, "Receive FIFO Overflow\n");
}
if (!mdp->cd->no_ade && (intr_status & EESR_ADE)) {
......@@ -1989,9 +2028,7 @@ static int sh_eth_set_ringparam(struct net_device *ndev,
napi_synchronize(&mdp->napi);
sh_eth_write(ndev, 0x0000, EESIPR);
/* Stop the chip's Tx and Rx processes. */
sh_eth_write(ndev, 0, EDTRR);
sh_eth_write(ndev, 0, EDRRR);
sh_eth_dev_exit(ndev);
/* Free all the skbuffs in the Rx queue. */
sh_eth_ring_free(ndev);
......@@ -2149,6 +2186,10 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
skb->len + 2);
txdesc->addr = dma_map_single(&ndev->dev, skb->data, skb->len,
DMA_TO_DEVICE);
if (dma_mapping_error(&ndev->dev, txdesc->addr)) {
kfree_skb(skb);
return NETDEV_TX_OK;
}
txdesc->buffer_length = skb->len;
if (entry >= mdp->num_tx_ring - 1)
......@@ -2210,11 +2251,8 @@ static int sh_eth_close(struct net_device *ndev)
napi_disable(&mdp->napi);
sh_eth_write(ndev, 0x0000, EESIPR);
/* Stop the chip's Tx and Rx processes. */
sh_eth_write(ndev, 0, EDTRR);
sh_eth_write(ndev, 0, EDRRR);
sh_eth_dev_exit(ndev);
sh_eth_get_stats(ndev);
/* PHY Disconnect */
if (mdp->phydev) {
phy_stop(mdp->phydev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment