Commit 22b8ba76 authored by James Hogan's avatar James Hogan

MIPS: Fix MIPS64 FP save/restore on 32-bit kernels

32-bit kernels can be configured to support MIPS64, in which case
neither CONFIG_64BIT or CONFIG_CPU_MIPS32_R* will be set. This causes
the CP0_Status.FR checks at the point of floating point register save
and restore to be compiled out, which results in odd FP registers not
being saved or restored to the task or signal context even when
CP0_Status.FR is set.

Fix the ifdefs to use CONFIG_CPU_MIPSR2 and CONFIG_CPU_MIPSR6, which are
enabled for the relevant revisions of either MIPS32 or MIPS64, along
with some other CPUs such as Octeon (r2), Loongson1 (r2), XLP (r2),
Loongson 3A R2.

The suspect code originates from commit 597ce172 ("MIPS: Support for
64-bit FP with O32 binaries") in v3.14, however the code in
__enable_fpu() was consistent and refused to set FR=1, falling back to
software FPU emulation. This was suboptimal but should be functionally
correct.

Commit fcc53b5f ("MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6
CPU") in v4.2 (and stable tagged back to 4.0) later introduced the bug
by updating __enable_fpu() to set FR=1 but failing to update the other
similar ifdefs to enable FR=1 state handling.

Fixes: fcc53b5f ("MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU")
Signed-off-by: default avatarJames Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/16739/
parent 37d15948
......@@ -126,8 +126,8 @@
.endm
.macro fpu_save_double thread status tmp
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f
fpu_save_16odd \thread
......@@ -184,8 +184,8 @@
.endm
.macro fpu_restore_double thread status tmp
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f # 16 register mode?
......
......@@ -40,8 +40,8 @@
*/
LEAF(_save_fp)
EXPORT_SYMBOL(_save_fp)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_save_double a0 t0 t1 # clobbers t1
......@@ -52,8 +52,8 @@ EXPORT_SYMBOL(_save_fp)
* Restore a thread's fp context.
*/
LEAF(_restore_fp)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_restore_double a0 t0 t1 # clobbers t1
......@@ -246,11 +246,11 @@ LEAF(_save_fp_context)
cfc1 t1, fcr31
.set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
#ifdef CONFIG_CPU_MIPSR2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
......@@ -314,11 +314,11 @@ LEAF(_save_fp_context)
LEAF(_restore_fp_context)
EX lw t1, 0(a1)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
#ifdef CONFIG_CPU_MIPSR2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment