Commit 2320dc6f authored by Tomi Valkeinen's avatar Tomi Valkeinen

ARM: OMAP: rx51: use new display drivers

Use the new display drivers for RX51 board.

The new OMAP display drivers were merged for 3.11, and we can now change
the board files to use the new ones and phase out the old ones.
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
parent 45a279c5
......@@ -45,6 +45,8 @@
#include <linux/platform_data/tsl2563.h>
#include <linux/lis3lv02d.h>
#include <video/omap-panel-data.h>
#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
#include <media/ir-rx51.h>
#endif
......@@ -226,6 +228,15 @@ static struct lp55xx_platform_data rx51_lp5523_platform_data = {
};
#endif
#define RX51_LCD_RESET_GPIO 90
static struct panel_acx565akm_platform_data acx_pdata = {
.name = "lcd",
.source = "sdi.0",
.reset_gpio = RX51_LCD_RESET_GPIO,
.datapairs = 2,
};
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
};
......@@ -254,6 +265,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
.chip_select = 2,
.max_speed_hz = 6000000,
.controller_data = &mipid_mcspi_config,
.platform_data = &acx_pdata,
},
[RX51_SPI_TSC2005] = {
.modalias = "tsc2005",
......
......@@ -29,34 +29,21 @@
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
static struct panel_acx565akm_data lcd_data = {
.reset_gpio = RX51_LCD_RESET_GPIO,
static struct connector_atv_platform_data rx51_tv_pdata = {
.name = "tv",
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
.invert_polarity = false,
};
static struct omap_dss_device rx51_lcd_device = {
.name = "lcd",
.driver_name = "panel-acx565akm",
.type = OMAP_DISPLAY_TYPE_SDI,
.phy.sdi.datapairs = 2,
.data = &lcd_data,
};
static struct omap_dss_device rx51_tv_device = {
.name = "tv",
.type = OMAP_DISPLAY_TYPE_VENC,
.driver_name = "venc",
.phy.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
};
static struct omap_dss_device *rx51_dss_devices[] = {
&rx51_lcd_device,
&rx51_tv_device,
static struct platform_device rx51_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &rx51_tv_pdata,
};
static struct omap_dss_board_info rx51_dss_board_info = {
.num_devices = ARRAY_SIZE(rx51_dss_devices),
.devices = rx51_dss_devices,
.default_device = &rx51_lcd_device,
.default_display_name = "lcd",
};
static int __init rx51_video_init(void)
......@@ -71,6 +58,8 @@ static int __init rx51_video_init(void)
omap_display_init(&rx51_dss_board_info);
platform_device_register(&rx51_tv_connector_device);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment