Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull ARM cpufreq updates for 5.18-rc1 fron Viresh Kumar:

"- Add per core DVFS support for QCom SoC (Bjorn Andersson), convert to yaml
   binding (Manivannan Sadhasivam) and various other fixes to the QCom drivers
   (Luca Weiss).

 - Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan Agner).

 - Fix CPPC driver's freq/performance conversions (Pierre Gondois).

 - Minor generic cleanups (Yury Norov)."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
  dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example
  cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev
  cpufreq: qcom-hw: Add support for per-core-dcvs
  cpufreq: CPPC: Fix performance/frequency conversion
  cpufreq: Add i.MX7S to cpufreq-dt-platdev blocklist
  ARM: dts: imx7s: Define operating points table for cpufreq
  cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse
  cpufreq: replace cpumask_weight with cpumask_empty where appropriate

Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt

-Qualcomm Technologies, Inc. CPUFREQ Bindings
-
-CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
-SoCs to manage frequency in hardware. It is capable of controlling frequency
-for multiple clusters.
-
-Properties:
-- compatible
-	Usage:		required
-	Value type:	<string>
-	Definition:	must be "qcom,cpufreq-hw" or "qcom,cpufreq-epss".
-
-- clocks
-	Usage:		required
-	Value type:	<phandle> From common clock binding.
-	Definition:	clock handle for XO clock and GPLL0 clock.
-
-- clock-names
-	Usage:		required
-	Value type:	<string> From common clock binding.
-	Definition:	must be "xo", "alternate".
-
-- reg
-	Usage:		required
-	Value type:	<prop-encoded-array>
-	Definition:	Addresses and sizes for the memory of the HW bases in
-			each frequency domain.
-- reg-names
-	Usage:		Optional
-	Value type:	<string>
-	Definition:	Frequency domain name i.e.
-			"freq-domain0", "freq-domain1".
-
-- #freq-domain-cells:
-	Usage:		required.
-	Definition:	Number of cells in a freqency domain specifier.
-
-* Property qcom,freq-domain
-Devices supporting freq-domain must set their "qcom,freq-domain" property with
-phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
-
-
-Example:
-
-Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
-DCVS state together.
-
-/ {
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
-				      compatible = "cache";
-				};
-			};
-		};
-
-		CPU1: cpu@100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			next-level-cache = <&L2_100>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU2: cpu@200 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x200>;
-			enable-method = "psci";
-			next-level-cache = <&L2_200>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU3: cpu@300 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x300>;
-			enable-method = "psci";
-			next-level-cache = <&L2_300>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU4: cpu@400 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x400>;
-			enable-method = "psci";
-			next-level-cache = <&L2_400>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_400: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU5: cpu@500 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x500>;
-			enable-method = "psci";
-			next-level-cache = <&L2_500>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_500: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU6: cpu@600 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x600>;
-			enable-method = "psci";
-			next-level-cache = <&L2_600>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU7: cpu@700 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x700>;
-			enable-method = "psci";
-			next-level-cache = <&L2_700>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_700: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-	};
-
- soc {
-	cpufreq_hw: cpufreq@17d43000 {
-		compatible = "qcom,cpufreq-hw";
-		reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
-		reg-names = "freq-domain0", "freq-domain1";
-
-		clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
-		clock-names = "xo", "alternate";
-
-		#freq-domain-cells = <1>;
-	};
-}

Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUFREQ
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+
+  CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+  SoCs to manage frequency in hardware. It is capable of controlling frequency
+  for multiple clusters.
+
+properties:
+  compatible:
+    oneOf:
+      - description: v1 of CPUFREQ HW
+        items:
+          - const: qcom,cpufreq-hw
+
+      - description: v2 of CPUFREQ HW (EPSS)
+        items:
+          - enum:
+              - qcom,sm8250-cpufreq-epss
+          - const: qcom,cpufreq-epss
+
+  reg:
+    minItems: 2
+    items:
+      - description: Frequency domain 0 register region
+      - description: Frequency domain 1 register region
+      - description: Frequency domain 2 register region
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: freq-domain0
+      - const: freq-domain1
+      - const: freq-domain2
+
+  clocks:
+    items:
+      - description: XO Clock
+      - description: GPLL0 Clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  '#freq-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#freq-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster
+    // switch DCVS state together.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      CPU0: cpu@0 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x0>;
+        enable-method = "psci";
+        next-level-cache = <&L2_0>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_0: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+          L3_0: l3-cache {
+            compatible = "cache";
+          };
+        };
+      };
+
+      CPU1: cpu@100 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x100>;
+        enable-method = "psci";
+        next-level-cache = <&L2_100>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_100: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU2: cpu@200 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x200>;
+        enable-method = "psci";
+        next-level-cache = <&L2_200>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_200: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU3: cpu@300 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x300>;
+        enable-method = "psci";
+        next-level-cache = <&L2_300>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_300: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU4: cpu@400 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x400>;
+        enable-method = "psci";
+        next-level-cache = <&L2_400>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_400: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU5: cpu@500 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x500>;
+        enable-method = "psci";
+        next-level-cache = <&L2_500>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_500: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU6: cpu@600 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x600>;
+        enable-method = "psci";
+        next-level-cache = <&L2_600>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_600: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU7: cpu@700 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x700>;
+        enable-method = "psci";
+        next-level-cache = <&L2_700>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_700: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+    };
+
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      cpufreq@17d43000 {
+        compatible = "qcom,cpufreq-hw";
+        reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+        reg-names = "freq-domain0", "freq-domain1";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
+
+        #freq-domain-cells = <1>;
+      };
+    };
+...

Documentation/devicetree/bindings/dvfs/performance-domain.yaml

@@ -52,10 +52,16 @@ additionalProperties: true
 
 examples:
   - |
-    performance: performance-controller@12340000 {
-        compatible = "qcom,cpufreq-hw";
-        reg = <0x12340000 0x1000>;
-        #performance-domain-cells = <1>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
     };
 
     // The node above defines a performance controller that is a performance

arch/arm/boot/dts/imx7s.dtsi

@@ -76,6 +76,22 @@ cpu0: cpu@0 {
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 			cpu-idle-states = <&cpu_sleep_wait>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&fuse_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xf>, <0xf>;
 		};
 	};
 

drivers/cpufreq/cppc_cpufreq.c

@@ -303,52 +303,48 @@ static u64 cppc_get_dmi_max_khz(void)
 
 /*
  * If CPPC lowest_freq and nominal_freq registers are exposed then we can
- * use them to convert perf to freq and vice versa
- *
- * If the perf/freq point lies between Nominal and Lowest, we can treat
- * (Low perf, Low freq) and (Nom Perf, Nom freq) as 2D co-ordinates of a line
- * and extrapolate the rest
- * For perf/freq > Nominal, we use the ratio perf:freq at Nominal for conversion
+ * use them to convert perf to freq and vice versa. The conversion is
+ * extrapolated as an affine function passing by the 2 points:
+ *  - (Low perf, Low freq)
+ *  - (Nominal perf, Nominal perf)
  */
 static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data,
 					     unsigned int perf)
 {
 	struct cppc_perf_caps *caps = &cpu_data->perf_caps;
+	s64 retval, offset = 0;
 	static u64 max_khz;
 	u64 mul, div;
 
 	if (caps->lowest_freq && caps->nominal_freq) {
-		if (perf >= caps->nominal_perf) {
-			mul = caps->nominal_freq;
-			div = caps->nominal_perf;
-		} else {
-			mul = caps->nominal_freq - caps->lowest_freq;
-			div = caps->nominal_perf - caps->lowest_perf;
-		}
+		mul = caps->nominal_freq - caps->lowest_freq;
+		div = caps->nominal_perf - caps->lowest_perf;
+		offset = caps->nominal_freq - div64_u64(caps->nominal_perf * mul, div);
 	} else {
 		if (!max_khz)
 			max_khz = cppc_get_dmi_max_khz();
 		mul = max_khz;
 		div = caps->highest_perf;
 	}
-	return (u64)perf * mul / div;
+
+	retval = offset + div64_u64(perf * mul, div);
+	if (retval >= 0)
+		return retval;
+	return 0;
 }
 
 static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data,
 					     unsigned int freq)
 {
 	struct cppc_perf_caps *caps = &cpu_data->perf_caps;
+	s64 retval, offset = 0;
 	static u64 max_khz;
 	u64  mul, div;
 
 	if (caps->lowest_freq && caps->nominal_freq) {
-		if (freq >= caps->nominal_freq) {
-			mul = caps->nominal_perf;
-			div = caps->nominal_freq;
-		} else {
-			mul = caps->lowest_perf;
-			div = caps->lowest_freq;
-		}
+		mul = caps->nominal_perf - caps->lowest_perf;
+		div = caps->nominal_freq - caps->lowest_freq;
+		offset = caps->nominal_perf - div64_u64(caps->nominal_freq * mul, div);
 	} else {
 		if (!max_khz)
 			max_khz = cppc_get_dmi_max_khz();
@@ -356,7 +352,10 @@ static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data,
 		div = max_khz;
 	}
 
-	return (u64)freq * mul / div;
+	retval = offset + div64_u64(freq * mul, div);
+	if (retval >= 0)
+		return retval;
+	return 0;
 }
 
 static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -110,6 +110,7 @@ static const struct of_device_id blocklist[] __initconst = {
 
 	{ .compatible = "fsl,imx7ulp", },
 	{ .compatible = "fsl,imx7d", },
+	{ .compatible = "fsl,imx7s", },
 	{ .compatible = "fsl,imx8mq", },
 	{ .compatible = "fsl,imx8mm", },
 	{ .compatible = "fsl,imx8mn", },
@@ -138,9 +139,11 @@ static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "qcom,msm8996", },
 	{ .compatible = "qcom,qcs404", },
 	{ .compatible = "qcom,sa8155p" },
+	{ .compatible = "qcom,sa8540p" },
 	{ .compatible = "qcom,sc7180", },
 	{ .compatible = "qcom,sc7280", },
 	{ .compatible = "qcom,sc8180x", },
+	{ .compatible = "qcom,sc8280xp", },
 	{ .compatible = "qcom,sdm845", },
 	{ .compatible = "qcom,sm6350", },
 	{ .compatible = "qcom,sm8150", },

drivers/cpufreq/qcom-cpufreq-hw.c

@@ -28,6 +28,7 @@
 
 struct qcom_cpufreq_soc_data {
 	u32 reg_enable;
+	u32 reg_dcvs_ctrl;
 	u32 reg_freq_lut;
 	u32 reg_volt_lut;
 	u32 reg_current_vote;
@@ -50,6 +51,8 @@ struct qcom_cpufreq_data {
 	bool cancel_throttle;
 	struct delayed_work throttle_work;
 	struct cpufreq_policy *policy;
+
+	bool per_core_dcvs;
 };
 
 static unsigned long cpu_hw_rate, xo_rate;
@@ -102,9 +105,14 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
 	struct qcom_cpufreq_data *data = policy->driver_data;
 	const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
 	unsigned long freq = policy->freq_table[index].frequency;
+	unsigned int i;
 
 	writel_relaxed(index, data->base + soc_data->reg_perf_state);
 
+	if (data->per_core_dcvs)
+		for (i = 1; i < cpumask_weight(policy->related_cpus); i++)
+			writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4);
+
 	if (icc_scaling_enabled)
 		qcom_cpufreq_set_bw(policy, freq);
 
@@ -137,10 +145,15 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
 	struct qcom_cpufreq_data *data = policy->driver_data;
 	const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
 	unsigned int index;
+	unsigned int i;
 
 	index = policy->cached_resolved_idx;
 	writel_relaxed(index, data->base + soc_data->reg_perf_state);
 
+	if (data->per_core_dcvs)
+		for (i = 1; i < cpumask_weight(policy->related_cpus); i++)
+			writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4);
+
 	return policy->freq_table[index].frequency;
 }
 
@@ -342,6 +355,7 @@ static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
 
 static const struct qcom_cpufreq_soc_data qcom_soc_data = {
 	.reg_enable = 0x0,
+	.reg_dcvs_ctrl = 0xbc,
 	.reg_freq_lut = 0x110,
 	.reg_volt_lut = 0x114,
 	.reg_current_vote = 0x704,
@@ -351,6 +365,7 @@ static const struct qcom_cpufreq_soc_data qcom_soc_data = {
 
 static const struct qcom_cpufreq_soc_data epss_soc_data = {
 	.reg_enable = 0x0,
+	.reg_dcvs_ctrl = 0xb0,
 	.reg_freq_lut = 0x100,
 	.reg_volt_lut = 0x200,
 	.reg_perf_state = 0x320,
@@ -481,8 +496,11 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 		goto error;
 	}
 
+	if (readl_relaxed(base + data->soc_data->reg_dcvs_ctrl) & 0x1)
+		data->per_core_dcvs = true;
+
 	qcom_get_related_cpus(index, policy->cpus);
-	if (!cpumask_weight(policy->cpus)) {
+	if (cpumask_empty(policy->cpus)) {
 		dev_err(dev, "Domain-%d failed to get related CPUs\n", index);
 		ret = -ENOENT;
 		goto error;

drivers/cpufreq/qcom-cpufreq-nvmem.c

@@ -130,7 +130,7 @@ static void get_krait_bin_format_b(struct device *cpu_dev,
 	}
 
 	/* Check PVS_BLOW_STATUS */
-	pte_efuse = *(((u32 *)buf) + 4);
+	pte_efuse = *(((u32 *)buf) + 1);
 	pte_efuse &= BIT(21);
 	if (pte_efuse) {
 		dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);

drivers/cpufreq/scmi-cpufreq.c

@@ -154,7 +154,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	 * table and opp-shared.
 	 */
 	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, priv->opp_shared_cpus);
-	if (ret || !cpumask_weight(priv->opp_shared_cpus)) {
+	if (ret || cpumask_empty(priv->opp_shared_cpus)) {
 		/*
 		 * Either opp-table is not set or no opp-shared was found.
 		 * Use the CPU mask from SCMI to designate CPUs sharing an OPP