Commit 2358dd3f authored by Divya Koppera's avatar Divya Koppera Committed by David S. Miller

dt-bindings: net: micrel: Configure latency values and timestamping check for LAN8814 phy

Supports configuring latency values and also adds
check for phy timestamping feature.

Signed-off-by: Divya Koppera<Divya.Koppera@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 4488f6b6
......@@ -45,3 +45,20 @@ Optional properties:
In fiber mode, auto-negotiation is disabled and the PHY can only work in
100base-fx (full and half duplex) modes.
- lan8814,ignore-ts: If present the PHY will not support timestamping.
This option acts as check whether Timestamping is supported by
hardware or not. LAN8814 phy support hardware tmestamping.
- lan8814,latency_rx_10: Configures Latency value of phy in ingress at 10 Mbps.
- lan8814,latency_tx_10: Configures Latency value of phy in egress at 10 Mbps.
- lan8814,latency_rx_100: Configures Latency value of phy in ingress at 100 Mbps.
- lan8814,latency_tx_100: Configures Latency value of phy in egress at 100 Mbps.
- lan8814,latency_rx_1000: Configures Latency value of phy in ingress at 1000 Mbps.
- lan8814,latency_tx_1000: Configures Latency value of phy in egress at 1000 Mbps.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment