Skip to content

L
linux
Commit 235db527 authored by Julian Wiedmann's avatar Julian Wiedmann Committed by Jakub Kicinski
Browse files
Options

s390/qeth: improve selection of ethtool link modes 

The link mode is a combination of port speed and port mode. But we
currently only consider the speed, and then typically select the
corresponding TP-based link mode. For 1G and 10G Fibre links this means
we display the wrong link modes.

Move the SPEED_* switch statements inside the PORT_* cases, and only
consider valid combinations where we can select the corresponding
link mode. Add the relevant link modes (1000baseX, 10000baseSR and
1000baseLR) that were introduced back with
commit 5711a982 ("net: ethtool: add support for 1000BaseX and missing 10G link modes").

To differentiate between 10000baseSR and 10000baseLR, use the detailed
media_type information that QUERY OAT provides.
Signed-off-by: default avatarJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent e92d42e7
Hide whitespace changes
Inline Side-by-side
Showing with 93 additions and 49 deletions
drivers/s390/net/qeth_core.h
View file @ 235db527
......@@ -701,10 +701,17 @@ enum qeth_pnso_mode {
QETH_PNSO_ADDR_INFO,
};
enum qeth_link_mode {
QETH_LINK_MODE_UNKNOWN,
QETH_LINK_MODE_FIBRE_SHORT,
QETH_LINK_MODE_FIBRE_LONG,
};
struct qeth_link_info {
u32 speed;
u8 duplex;
u8 port;
enum qeth_link_mode link_mode;
};
#define QETH_BROADCAST_WITH_ECHO 0x01
......
drivers/s390/net/qeth_core_main.c
View file @ 235db527
......@@ -5018,13 +5018,19 @@ static int qeth_init_link_info_oat_cb(struct qeth_card *card,
switch (phys_if->media_type) {
case QETH_QOAT_PHYS_MEDIA_COPPER:
link_info->port = PORT_TP;
link_info->link_mode = QETH_LINK_MODE_UNKNOWN;
break;
case QETH_QOAT_PHYS_MEDIA_FIBRE_SHORT:
link_info->port = PORT_FIBRE;
link_info->link_mode = QETH_LINK_MODE_FIBRE_SHORT;
break;
case QETH_QOAT_PHYS_MEDIA_FIBRE_LONG:
link_info->port = PORT_FIBRE;
link_info->link_mode = QETH_LINK_MODE_FIBRE_LONG;
break;
default:
link_info->port = PORT_OTHER;
link_info->link_mode = QETH_LINK_MODE_UNKNOWN;
break;
}
......@@ -5038,6 +5044,7 @@ static void qeth_init_link_info(struct qeth_card *card)
if (IS_IQD(card) || IS_VM_NIC(card)) {
card->info.link_info.speed = SPEED_10000;
card->info.link_info.port = PORT_FIBRE;
card->info.link_info.link_mode = QETH_LINK_MODE_FIBRE_SHORT;
} else {
switch (card->info.link_type) {
case QETH_LINK_TYPE_FAST_ETH:
......@@ -5064,6 +5071,8 @@ static void qeth_init_link_info(struct qeth_card *card)
card->info.link_info.speed = SPEED_UNKNOWN;
card->info.link_info.port = PORT_OTHER;
}
card->info.link_info.link_mode = QETH_LINK_MODE_UNKNOWN;
}
/* Get more accurate data via QUERY OAT: */
......@@ -5089,6 +5098,8 @@ static void qeth_init_link_info(struct qeth_card *card)
card->info.link_info.duplex = link_info.duplex;
if (link_info.port != PORT_OTHER)
card->info.link_info.port = link_info.port;
if (link_info.link_mode != QETH_LINK_MODE_UNKNOWN)
card->info.link_info.link_mode = link_info.link_mode;
}
}
}
......
drivers/s390/net/qeth_ethtool.c
View file @ 235db527
......@@ -324,7 +324,8 @@ static int qeth_set_per_queue_coalesce(struct net_device *dev, u32 queue,
/* Autoneg and full-duplex are supported and advertised unconditionally. */
/* Always advertise and support all speeds up to specified, and only one */
/* specified port type. */
static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd)
static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd,
enum qeth_link_mode link_mode)
{
ethtool_link_ksettings_zero_link_mode(cmd, supported);
ethtool_link_ksettings_zero_link_mode(cmd, advertising);
......@@ -337,58 +338,83 @@ static void qeth_set_ethtool_link_modes(struct ethtool_link_ksettings *cmd)
case PORT_TP:
ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);
switch (cmd->base.speed) {
case SPEED_10000:
ethtool_link_ksettings_add_link_mode(cmd, supported,
10000baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
10000baseT_Full);
fallthrough;
case SPEED_1000:
ethtool_link_ksettings_add_link_mode(cmd, supported,
1000baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
1000baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, supported,
1000baseT_Half);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
1000baseT_Half);
fallthrough;
case SPEED_100:
ethtool_link_ksettings_add_link_mode(cmd, supported,
100baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
100baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, supported,
100baseT_Half);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
100baseT_Half);
fallthrough;
case SPEED_10:
ethtool_link_ksettings_add_link_mode(cmd, supported,
10baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
10baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, supported,
10baseT_Half);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
10baseT_Half);
break;
default:
break;
}
break;
case PORT_FIBRE:
ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
break;
default:
break;
}
/* partially does fall through, to also select lower speeds */
switch (cmd->base.speed) {
case SPEED_25000:
ethtool_link_ksettings_add_link_mode(cmd, supported,
25000baseSR_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
25000baseSR_Full);
break;
case SPEED_10000:
ethtool_link_ksettings_add_link_mode(cmd, supported,
10000baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
10000baseT_Full);
fallthrough;
case SPEED_1000:
ethtool_link_ksettings_add_link_mode(cmd, supported,
1000baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
1000baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, supported,
1000baseT_Half);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
1000baseT_Half);
fallthrough;
case SPEED_100:
ethtool_link_ksettings_add_link_mode(cmd, supported,
100baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
100baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, supported,
100baseT_Half);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
100baseT_Half);
fallthrough;
case SPEED_10:
ethtool_link_ksettings_add_link_mode(cmd, supported,
10baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
10baseT_Full);
ethtool_link_ksettings_add_link_mode(cmd, supported,
10baseT_Half);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
10baseT_Half);
switch (cmd->base.speed) {
case SPEED_25000:
ethtool_link_ksettings_add_link_mode(cmd, supported,
25000baseSR_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
25000baseSR_Full);
break;
case SPEED_10000:
if (link_mode == QETH_LINK_MODE_FIBRE_LONG) {
ethtool_link_ksettings_add_link_mode(cmd, supported,
10000baseLR_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
10000baseLR_Full);
} else if (link_mode == QETH_LINK_MODE_FIBRE_SHORT) {
ethtool_link_ksettings_add_link_mode(cmd, supported,
10000baseSR_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
10000baseSR_Full);
}
break;
case SPEED_1000:
ethtool_link_ksettings_add_link_mode(cmd, supported,
1000baseX_Full);
ethtool_link_ksettings_add_link_mode(cmd, advertising,
1000baseX_Full);
break;
default:
break;
}
break;
default:
break;
......@@ -420,7 +446,7 @@ static int qeth_get_link_ksettings(struct net_device *netdev,
cmd->base.port = link_info.port;
}
qeth_set_ethtool_link_modes(cmd);
qeth_set_ethtool_link_modes(cmd, card->info.link_info.link_mode);
return 0;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7