Commit 23c7301d authored by Kukjin Kim's avatar Kukjin Kim

Merge branch 'next/board-samsung-2' into next/board-samsung-3

parents 84a1caf1 6bba0caf
......@@ -207,6 +207,7 @@ config MACH_SMDKV310
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
......@@ -326,6 +327,7 @@ config MACH_ORIGEN
select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_USB_HSOTG
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
......@@ -360,22 +362,26 @@ config MACH_SMDK4212
select S3C_DEV_I2C3
select S3C_DEV_I2C7
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_MFC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung SMDK4212
......
......@@ -21,6 +21,7 @@
#include <linux/mfd/max8997.h>
#include <linux/lcd.h>
#include <linux/rfkill-gpio.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
......@@ -499,6 +500,9 @@ static void __init origen_ohci_init(void)
exynos4_ohci_set_platdata(pdata);
}
/* USB OTG */
static struct s3c_hsotg_plat origen_hsotg_pdata;
static struct gpio_keys_button origen_gpio_keys_table[] = {
{
.code = KEY_MENU,
......@@ -655,6 +659,7 @@ static struct platform_device *origen_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
......@@ -744,6 +749,7 @@ static void __init origen_machine_init(void)
origen_ehci_init();
origen_ohci_init();
s3c_hsotg_set_platdata(&origen_hsotg_pdata);
clk_xusbxti.rate = 24000000;
s5p_tv_setup();
......
......@@ -13,12 +13,14 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/lcd.h>
#include <linux/mfd/max8997.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/machine.h>
#include <linux/serial_core.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
......@@ -28,10 +30,12 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
#include <plat/regs-fb.h>
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
......@@ -219,8 +223,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
static uint32_t smdk4x12_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
};
static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
......@@ -230,10 +236,41 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
.keymap_data = &smdk4x12_keymap_data,
.rows = 2,
.cols = 5,
.rows = 3,
.cols = 8,
};
static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
.xres = 480,
.yres = 800,
.virtual_x = 480,
.virtual_y = 800 * 2,
.max_bpp = 32,
.default_bpp = 24,
};
static struct fb_videomode smdk4x12_lcd_timing = {
.left_margin = 8,
.right_margin = 8,
.upper_margin = 6,
.lower_margin = 6,
.hsync_len = 6,
.vsync_len = 4,
.xres = 480,
.yres = 800,
};
static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
.win[0] = &smdk4x12_fb_win0,
.vtiming = &smdk4x12_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
/* USB OTG */
static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
static struct platform_device *smdk4x12_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
......@@ -242,12 +279,14 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
&s3c_device_i2c3,
&s3c_device_i2c7,
&s3c_device_rtc,
&s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_fimc_md,
&s5p_device_fimd0,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
......@@ -293,6 +332,10 @@ static void __init smdk4x12_machine_init(void)
s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
}
......
......@@ -19,6 +19,7 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/pwm_backlight.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
......@@ -271,6 +272,15 @@ static void __init smdkv310_ohci_init(void)
exynos4_ohci_set_platdata(pdata);
}
/* USB OTG */
static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
/* Audio device */
static struct platform_device smdkv310_device_audio = {
.name = "smdk-audio",
.id = -1,
};
static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
......@@ -279,6 +289,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_i2c1,
&s5p_device_i2c_hdmiphy,
&s3c_device_rtc,
&s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
......@@ -302,6 +313,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&samsung_asoc_dma,
&samsung_asoc_idma,
&s5p_device_fimd0,
&smdkv310_device_audio,
&smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
......@@ -390,6 +402,7 @@ static void __init smdkv310_machine_init(void)
smdkv310_ehci_init();
smdkv310_ohci_init();
s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
clk_xusbxti.rate = 24000000;
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
......
......@@ -13,9 +13,7 @@
#include <linux/gpio.h>
#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128)
#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
#define PCA935X_GPIO_BASE GPIO_BOARD_START
#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
......
......@@ -39,6 +39,7 @@ static struct spi_board_info wm1253_devs[] = {
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
.irq = S3C_EINT(5),
.controller_data = &wm0010_spi_csinfo,
},
};
......@@ -168,7 +169,6 @@ static struct wm8994_pdata wm8994_pdata = {
.gpio_defaults = {
0x3, /* IRQ out, active high, CMOS */
},
.irq_base = CODEC_IRQ_BASE,
.ldo = {
{ .init_data = &wm8994_ldo1, },
{ .init_data = &wm8994_ldo2, },
......@@ -182,6 +182,11 @@ static const struct i2c_board_info wm1277_devs[] = {
},
};
static const struct i2c_board_info wm5102_devs[] = {
{ I2C_BOARD_INFO("wm5102", 0x1a),
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, },
};
static const struct i2c_board_info wm6230_i2c_devs[] = {
{ I2C_BOARD_INFO("wm9081", 0x6c),
.platform_data = &wm9081_pdata, },
......@@ -209,6 +214,7 @@ static __devinitdata const struct {
.spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
{ .id = 0x33, .name = "XXXX-EV1 Oban" },
{ .id = 0x34, .name = "WM0010-6320-CS42 Balblair" },
{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
.i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
{ .id = 0x3a, .name = "1259-EV1 Tobermory",
......@@ -218,6 +224,8 @@ static __devinitdata const struct {
{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
{ .id = 0x3d, .name = "1277-EV1 Littlemill",
.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127",
.i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) },
};
static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
......
......@@ -525,7 +525,6 @@ static struct wm831x_touch_pdata touch_pdata __initdata = {
static struct wm831x_pdata crag_pmic_pdata __initdata = {
.wm831x_num = 1,
.irq_base = BANFF_PMIC_IRQ_BASE,
.gpio_base = BANFF_PMIC_GPIO_BASE,
.soft_shutdown = true,
......
......@@ -566,7 +566,6 @@ static struct wm831x_status_pdata wm1192_led8_pdata = {
static struct wm831x_pdata smdk6410_wm1192_pdata = {
.pre_init = wm1192_pre_init,
.irq_base = IRQ_BOARD_START,
.backlight = &wm1192_backlight_pdata,
.dcdc = {
......
......@@ -152,6 +152,7 @@ config MACH_SMDKV210
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
......@@ -170,6 +171,7 @@ config MACH_SMDKV210
select S5PV210_SETUP_IDE
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
select S5PV210_SETUP_USB_PHY
help
Machine support for Samsung SMDKV210
......
......@@ -600,10 +600,17 @@ static void aquila_setup_sdhci(void)
s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
};
/* Audio device */
static struct platform_device aquila_device_audio = {
.name = "smdk-audio",
.id = -1,
};
static struct platform_device *aquila_devices[] __initdata = {
&aquila_i2c_gpio_pmic,
&aquila_i2c_gpio5,
&aquila_device_gpiokeys,
&aquila_device_audio,
&s3c_device_fb,
&s5p_device_onenand,
&s3c_device_hsmmc0,
......
......@@ -859,12 +859,19 @@ static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
.num_clients = ARRAY_SIZE(goni_camera_sensors),
};
/* Audio device */
static struct platform_device goni_device_audio = {
.name = "smdk-audio",
.id = -1,
};
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
&goni_spi_gpio,
&goni_i2c_gpio_pmic,
&goni_i2c_gpio5,
&goni_device_audio,
&mmc2_fixed_voltage,
&goni_device_gpiokeys,
&s5p_device_mfc,
......
......@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
......@@ -47,6 +48,7 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
#include <plat/mfc.h>
#include <plat/clock.h>
#include "common.h"
......@@ -203,6 +205,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
/* USB OTG */
static struct s3c_hsotg_plat smdkv210_hsotg_pdata;
static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_cfcon,
......@@ -216,6 +221,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_i2c2,
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_fimc0,
&s5p_device_fimc1,
......@@ -314,6 +320,9 @@ static void __init smdkv210_machine_init(void)
samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
clk_xusbxti.rate = 24000000;
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment