ptp: ocp: Add 4 frequency counters

Input signals can be steered to any of the frequency counters.
The counter measures the frequency over a number of seconds:

  echo 0 > freq1/seconds  = turns off measurement
  echo 1 > freq1/seconds  = sets period & turns on measurment.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/ptp/ptp_ocp.c

@@ -199,6 +199,15 @@ struct signal_reg {
 	u32	repeat_count;
 };
 
+struct frequency_reg {
+	u32	ctrl;
+	u32	status;
+};
+#define FREQ_STATUS_VALID	BIT(31)
+#define FREQ_STATUS_ERROR	BIT(30)
+#define FREQ_STATUS_OVERRUN	BIT(29)
+#define FREQ_STATUS_MASK	(BIT(24) - 1)
+
 struct ptp_ocp_flash_info {
 	const char *name;
 	int pci_offset;
@@ -245,6 +254,7 @@ struct ocp_attr_group {
 
 #define OCP_CAP_BASIC	BIT(0)
 #define OCP_CAP_SIGNAL	BIT(1)
+#define OCP_CAP_FREQ	BIT(2)
 
 struct ptp_ocp_signal {
 	ktime_t		period;
@@ -275,6 +285,7 @@ struct ptp_ocp {
 	struct dcf_master_reg	__iomem *dcf_out;
 	struct dcf_slave_reg	__iomem *dcf_in;
 	struct tod_reg		__iomem *nmea_out;
+	struct frequency_reg	__iomem *freq_in[4];
 	struct ptp_ocp_ext_src	*signal_out[4];
 	struct ptp_ocp_ext_src	*pps;
 	struct ptp_ocp_ext_src	*ts0;
@@ -576,6 +587,22 @@ static struct ocp_resource ocp_fb_resource[] = {
 			},
 		},
 	},
+	{
+		OCP_MEM_RESOURCE(freq_in[0]),
+		.offset = 0x01200000, .size = 0x10000,
+	},
+	{
+		OCP_MEM_RESOURCE(freq_in[1]),
+		.offset = 0x01210000, .size = 0x10000,
+	},
+	{
+		OCP_MEM_RESOURCE(freq_in[2]),
+		.offset = 0x01220000, .size = 0x10000,
+	},
+	{
+		OCP_MEM_RESOURCE(freq_in[3]),
+		.offset = 0x01230000, .size = 0x10000,
+	},
 	{
 		.setup = ptp_ocp_fb_board_init,
 	},
@@ -614,13 +641,17 @@ static struct ocp_selector ptp_ocp_clock[] = {
 #define SMA_DISABLE		0x10000
 
 static struct ocp_selector ptp_ocp_sma_in[] = {
-	{ .name = "10Mhz",	.value = 0x00 },
-	{ .name = "PPS1",	.value = 0x01 },
-	{ .name = "PPS2",	.value = 0x02 },
-	{ .name = "TS1",	.value = 0x04 },
-	{ .name = "TS2",	.value = 0x08 },
-	{ .name = "IRIG",	.value = 0x10 },
-	{ .name = "DCF",	.value = 0x20 },
+	{ .name = "10Mhz",	.value = 0x0000 },
+	{ .name = "PPS1",	.value = 0x0001 },
+	{ .name = "PPS2",	.value = 0x0002 },
+	{ .name = "TS1",	.value = 0x0004 },
+	{ .name = "TS2",	.value = 0x0008 },
+	{ .name = "IRIG",	.value = 0x0010 },
+	{ .name = "DCF",	.value = 0x0020 },
+	{ .name = "FREQ1",	.value = 0x0100 },
+	{ .name = "FREQ2",	.value = 0x0200 },
+	{ .name = "FREQ3",	.value = 0x0400 },
+	{ .name = "FREQ4",	.value = 0x0800 },
 	{ .name = "None",	.value = SMA_DISABLE },
 	{ }
 };
@@ -1835,6 +1866,8 @@ ptp_ocp_fb_board_init(struct ptp_ocp *bp, struct ocp_resource *r)
 	ver = bp->fw_version & 0xffff;
 	if (ver >= 19)
 		bp->fw_cap |= OCP_CAP_SIGNAL;
+	if (ver >= 20)
+		bp->fw_cap |= OCP_CAP_FREQ;
 
 	ptp_ocp_tod_init(bp);
 	ptp_ocp_nmea_out_init(bp);
@@ -2430,6 +2463,73 @@ static EXT_ATTR_RO(signal, start, 1);
 static EXT_ATTR_RO(signal, start, 2);
 static EXT_ATTR_RO(signal, start, 3);
 
+static ssize_t
+seconds_store(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct dev_ext_attribute *ea = to_ext_attr(attr);
+	struct ptp_ocp *bp = dev_get_drvdata(dev);
+	int idx = (uintptr_t)ea->var;
+	u32 val;
+	int err;
+
+	err = kstrtou32(buf, 0, &val);
+	if (err)
+		return err;
+	if (val > 0xff)
+		return -EINVAL;
+
+	if (val)
+		val = (val << 8) | 0x1;
+
+	iowrite32(val, &bp->freq_in[idx]->ctrl);
+
+	return count;
+}
+
+static ssize_t
+seconds_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dev_ext_attribute *ea = to_ext_attr(attr);
+	struct ptp_ocp *bp = dev_get_drvdata(dev);
+	int idx = (uintptr_t)ea->var;
+	u32 val;
+
+	val = ioread32(&bp->freq_in[idx]->ctrl);
+	if (val & 1)
+		val = (val >> 8) & 0xff;
+	else
+		val = 0;
+
+	return sysfs_emit(buf, "%u\n", val);
+}
+static EXT_ATTR_RW(freq, seconds, 0);
+static EXT_ATTR_RW(freq, seconds, 1);
+static EXT_ATTR_RW(freq, seconds, 2);
+static EXT_ATTR_RW(freq, seconds, 3);
+
+static ssize_t
+frequency_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dev_ext_attribute *ea = to_ext_attr(attr);
+	struct ptp_ocp *bp = dev_get_drvdata(dev);
+	int idx = (uintptr_t)ea->var;
+	u32 val;
+
+	val = ioread32(&bp->freq_in[idx]->status);
+	if (val & FREQ_STATUS_ERROR)
+		return sysfs_emit(buf, "error\n");
+	if (val & FREQ_STATUS_OVERRUN)
+		return sysfs_emit(buf, "overrun\n");
+	if (val & FREQ_STATUS_VALID)
+		return sysfs_emit(buf, "%lu\n", val & FREQ_STATUS_MASK);
+	return 0;
+}
+static EXT_ATTR_RO(freq, frequency, 0);
+static EXT_ATTR_RO(freq, frequency, 1);
+static EXT_ATTR_RO(freq, frequency, 2);
+static EXT_ATTR_RO(freq, frequency, 3);
+
 static ssize_t
 serialnum_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -2689,6 +2789,26 @@ DEVICE_SIGNAL_GROUP(gen2, 1);
 DEVICE_SIGNAL_GROUP(gen3, 2);
 DEVICE_SIGNAL_GROUP(gen4, 3);
 
+#define _DEVICE_FREQ_GROUP_ATTRS(_nr)					\
+	static struct attribute *fb_timecard_freq##_nr##_attrs[] = {	\
+		&dev_attr_freq##_nr##_seconds.attr.attr,		\
+		&dev_attr_freq##_nr##_frequency.attr.attr,		\
+		NULL,							\
+	}
+
+#define DEVICE_FREQ_GROUP(_name, _nr)					\
+	_DEVICE_FREQ_GROUP_ATTRS(_nr);					\
+	static const struct attribute_group				\
+			fb_timecard_freq##_nr##_group = {		\
+		.name = #_name,						\
+		.attrs = fb_timecard_freq##_nr##_attrs,			\
+}
+
+DEVICE_FREQ_GROUP(freq1, 0);
+DEVICE_FREQ_GROUP(freq2, 1);
+DEVICE_FREQ_GROUP(freq3, 2);
+DEVICE_FREQ_GROUP(freq4, 3);
+
 static struct attribute *fb_timecard_attrs[] = {
 	&dev_attr_serialnum.attr,
 	&dev_attr_gnss_sync.attr,
@@ -2717,6 +2837,10 @@ static const struct ocp_attr_group fb_timecard_groups[] = {
 	{ .cap = OCP_CAP_SIGNAL,    .group = &fb_timecard_signal1_group },
 	{ .cap = OCP_CAP_SIGNAL,    .group = &fb_timecard_signal2_group },
 	{ .cap = OCP_CAP_SIGNAL,    .group = &fb_timecard_signal3_group },
+	{ .cap = OCP_CAP_FREQ,	    .group = &fb_timecard_freq0_group },
+	{ .cap = OCP_CAP_FREQ,	    .group = &fb_timecard_freq1_group },
+	{ .cap = OCP_CAP_FREQ,	    .group = &fb_timecard_freq2_group },
+	{ .cap = OCP_CAP_FREQ,	    .group = &fb_timecard_freq3_group },
 	{ },
 };
 
@@ -2781,6 +2905,36 @@ _signal_summary_show(struct seq_file *s, struct ptp_ocp *bp, int nr)
 	seq_printf(s, " start:%llu\n", signal->start);
 }
 
+static void
+_frequency_summary_show(struct seq_file *s, int nr,
+			struct frequency_reg __iomem *reg)
+{
+	char label[8];
+	bool on;
+	u32 val;
+
+	if (!reg)
+		return;
+
+	sprintf(label, "FREQ%d", nr);
+	val = ioread32(&reg->ctrl);
+	on = val & 1;
+	val = (val >> 8) & 0xff;
+	seq_printf(s, "%7s: %s, sec:%u",
+		   label,
+		   on ? " ON" : "OFF",
+		   val);
+
+	val = ioread32(&reg->status);
+	if (val & FREQ_STATUS_ERROR)
+		seq_printf(s, ", error");
+	if (val & FREQ_STATUS_OVERRUN)
+		seq_printf(s, ", overrun");
+	if (val & FREQ_STATUS_VALID)
+		seq_printf(s, ", freq %lu Hz", val & FREQ_STATUS_MASK);
+	seq_printf(s, "  reg:%x\n", val);
+}
+
 static int
 ptp_ocp_summary_show(struct seq_file *s, void *data)
 {
@@ -2888,6 +3042,10 @@ ptp_ocp_summary_show(struct seq_file *s, void *data)
 		for (i = 0; i < 4; i++)
 			_signal_summary_show(s, bp, i);
 
+	if (bp->fw_cap & OCP_CAP_FREQ)
+		for (i = 0; i < 4; i++)
+			_frequency_summary_show(s, i, bp->freq_in[i]);
+
 	if (bp->irig_out) {
 		ctrl = ioread32(&bp->irig_out->ctrl);
 		on = ctrl & IRIG_M_CTRL_ENABLE;