Commit 241f8f6f authored by Gary Bisson's avatar Gary Bisson Committed by Shawn Guo

ARM: dts: imx6qdl-nit6xlite: use hyphens for nodes name

Therefore aligning the panel nodes name across all platforms.

Also removing the bt_rfkill node since the mainline rfkill-gpio driver
doesn't support device trees.
Signed-off-by: default avatarGary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 986fb9e4
...@@ -97,15 +97,6 @@ reg_wlan_vmmc: regulator@3 { ...@@ -97,15 +97,6 @@ reg_wlan_vmmc: regulator@3 {
}; };
}; };
bt_rfkill {
compatible = "rfkill-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bt_rfkill>;
gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
name = "bt_rfkill";
type = <2>;
};
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -160,7 +151,7 @@ j46-pin3 { ...@@ -160,7 +151,7 @@ j46-pin3 {
}; };
}; };
backlight_lcd { backlight-lcd {
compatible = "pwm-backlight"; compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>; pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>; brightness-levels = <0 4 8 16 32 64 128 255>;
...@@ -169,7 +160,7 @@ backlight_lcd { ...@@ -169,7 +160,7 @@ backlight_lcd {
status = "okay"; status = "okay";
}; };
backlight_lvds0: backlight_lvds0 { backlight_lvds0: backlight-lvds0 {
compatible = "pwm-backlight"; compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>; pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>; brightness-levels = <0 4 8 16 32 64 128 255>;
...@@ -178,7 +169,7 @@ backlight_lvds0: backlight_lvds0 { ...@@ -178,7 +169,7 @@ backlight_lvds0: backlight_lvds0 {
status = "okay"; status = "okay";
}; };
panel_lvds0 { panel-lvds0 {
compatible = "hannstar,hsd100pxn1"; compatible = "hannstar,hsd100pxn1";
backlight = <&backlight_lvds0>; backlight = <&backlight_lvds0>;
...@@ -328,19 +319,6 @@ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 ...@@ -328,19 +319,6 @@ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
>; >;
}; };
pinctrl_bt_rfkill: bt_rfkillgrp {
fsl,pins = <
/* BT wake */
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
/* BT reset */
MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0
/* BT reg en */
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
/* BT host wake irq */
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0
>;
};
pinctrl_ecspi1: ecspi1grp { pinctrl_ecspi1: ecspi1grp {
fsl,pins = < fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
...@@ -374,7 +352,7 @@ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 ...@@ -374,7 +352,7 @@ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>; >;
}; };
pinctrl_gpio_keys: gpio_keysgrp { pinctrl_gpio_keys: gpio-keysgrp {
fsl,pins = < fsl,pins = <
/* Home Button: J14 pin 5 */ /* Home Button: J14 pin 5 */
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
...@@ -457,7 +435,7 @@ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 ...@@ -457,7 +435,7 @@ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
>; >;
}; };
pinctrl_wlan_vmmc: wlan_vmmcgrp { pinctrl_wlan_vmmc: wlan-vmmcgrp {
fsl,pins = < fsl,pins = <
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0
>; >;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment