clk: qcom: add clock controller driver for qca8386/qca8084
The clock controller driver of qca8386/qca8084 is registered as the MDIO device, the hardware register is accessed by MDIO bus that is normally used to access general PHY device, which is different from the current existed qcom clock controller drivers using ioremap to access hardware clock registers, nsscc-qca8k is accessed via an MDIO bus. MDIO bus is commonly utilized by both qca8386/qca8084 and other PHY devices, so the mutex lock mdio_bus->mdio_lock should be used instead of using the mutex lock of remap. To access the hardware clock registers of qca8386/qca8084, there is a special MDIO frame sequence, which needs to be sent to the device. Enable the reference clock before resetting the clock controller, the reference clock rate is fixed to 50MHZ. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Link: https://lore.kernel.org/r/20240605124541.2711467-5-quic_luoj@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>
Showing
This diff is collapsed.
Please register or sign in to comment