Skip to content

L
linux
Commit 244acb1b authored by Russell King's avatar Russell King
Browse files
Options

Merge branch 'config' into late-for-linus

parents cb8db5d4 93e22567
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 793 additions and 795 deletions
arch/arm/Kconfig
View file @ 244acb1b
This diff is collapsed.
arch/arm/common/Kconfig
View file @ 244acb1b
config ARM_GIC
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
bool
config GIC_NON_BANKED
bool
config ARM_VIC
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
bool
config ARM_VIC_NR
int
......
arch/arm/mach-at91/Kconfig
View file @ 244acb1b
......@@ -19,8 +19,8 @@ config AT91_SAM9G45_RESET
config SOC_AT91SAM9
bool
select GENERIC_CLOCKEVENTS
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
menu "Atmel AT91 System-on-Chip"
......@@ -28,66 +28,66 @@ comment "Atmel AT91 Processor"
config SOC_AT91SAM9
bool
select AT91_SAM9_SMC
select AT91_SAM9_TIME
select CPU_ARM926T
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select AT91_SAM9_TIME
select AT91_SAM9_SMC
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_NET_MACB
select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
config SOC_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
config SOC_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select SOC_AT91SAM9
config SOC_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
config SOC_AT91SAM9G45
bool "AT91SAM9G45 or AT91SAM9M10 families"
select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
config SOC_AT91SAM9X5
bool "AT91SAM9x5 family"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select SOC_AT91SAM9
help
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
This means that your SAM9 name finishes with a '5' (except if it is
......@@ -97,9 +97,9 @@ config SOC_AT91SAM9X5
config SOC_AT91SAM9N12
bool "AT91SAM9N12 family"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
......@@ -144,9 +144,9 @@ config ARCH_AT91SAM9G45
config ARCH_AT91X40
bool "AT91x40"
depends on !MMU
select ARCH_USES_GETTIMEOFFSET
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select ARCH_USES_GETTIMEOFFSET
endchoice
......
arch/arm/mach-clps711x/Kconfig
View file @ 244acb1b
......@@ -23,9 +23,9 @@ config ARCH_CLEP7312
config ARCH_EDB7211
bool "EDB7211"
select ISA
select ARCH_SPARSEMEM_ENABLE
select ARCH_SELECT_MEMORY_MODEL
select ARCH_SPARSEMEM_ENABLE
select ISA
help
Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
evaluation board.
......
arch/arm/mach-davinci/Kconfig
View file @ 244acb1b
......@@ -4,12 +4,12 @@ config AINTC
bool
config CP_INTC
select IRQ_DOMAIN
bool
select IRQ_DOMAIN
config ARCH_DAVINCI_DMx
select CPU_ARM926T
bool
select CPU_ARM926T
menu "TI DaVinci Implementations"
......@@ -32,19 +32,19 @@ config ARCH_DAVINCI_DM646x
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137/AM17x based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
select CP_INTC
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select ARCH_HAS_CPUFREQ
select CP_INTC
config ARCH_DAVINCI_DA8XX
select CPU_ARM926T
bool
select CPU_ARM926T
config ARCH_DAVINCI_DM365
bool "DaVinci 365 based system"
......@@ -52,9 +52,9 @@ config ARCH_DAVINCI_DM365
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_TNETV107X
bool "TNETV107X based system"
select CPU_V6
select CP_INTC
bool "TNETV107X based system"
comment "DaVinci Board Type"
......@@ -103,9 +103,9 @@ config MACH_DAVINCI_DM6467_EVM
bool "TI DM6467 EVM"
default ARCH_DAVINCI_DM646x
depends on ARCH_DAVINCI_DM646x
select MACH_DAVINCI_DM6467TEVM
select EEPROM_AT24
select I2C
select MACH_DAVINCI_DM6467TEVM
help
Configure this option to specify the whether the board used
for development is a DM6467 EVM
......@@ -127,8 +127,8 @@ config MACH_DAVINCI_DA830_EVM
bool "TI DA830/OMAP-L137/AM17x Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
select GPIO_PCF857X
select EEPROM_AT24
select GPIO_PCF857X
select I2C
help
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
......
arch/arm/mach-exynos/Kconfig
View file @ 244acb1b
......@@ -31,11 +31,11 @@ config CPU_EXYNOS4210
bool "SAMSUNG EXYNOS4210"
default y
depends on ARCH_EXYNOS4
select SAMSUNG_DMADEV
select ARM_CPU_SUSPEND if PM
select PM_GENERIC_DOMAINS
select S5P_PM if PM
select S5P_SLEEP if PM
select PM_GENERIC_DOMAINS
select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support
......@@ -43,9 +43,9 @@ config SOC_EXYNOS4212
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4212 SoC support
......@@ -61,9 +61,9 @@ config SOC_EXYNOS5250
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support
......@@ -189,71 +189,71 @@ config MACH_SMDKC210
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
select S5P_DEV_FIMD0
select EXYNOS4_DEV_AHCI
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S3C_DEV_I2C1
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_TV
select S5P_DEV_USB_EHCI
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
select EXYNOS_DEV_DMA
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select S3C24XX_PWM
help
Machine support for Samsung SMDKV310
config MACH_ARMLEX4210
bool "ARMLEX4210"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select EXYNOS4_DEV_AHCI
select EXYNOS4_SETUP_SDHCI
select EXYNOS_DEV_DMA
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_AHCI
select EXYNOS_DEV_DMA
select EXYNOS4_SETUP_SDHCI
select S3C_DEV_RTC
select S3C_DEV_WDT
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_EXYNOS4210
select S5P_HRT
select CLKSRC_MMIO
select CPU_EXYNOS4210
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select HAVE_SCHED_CLOCK
select S5P_GPIO_INT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_G2D
select S5P_DEV_CSIS0
select S5P_DEV_JPEG
select S5P_DEV_FIMD0
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
......@@ -261,21 +261,21 @@ config MACH_UNIVERSAL_C210
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_USB_HSOTG
select S5P_DEV_CSIS0
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_FIMC
select S5P_GPIO_INT
select S5P_HRT
select S5P_SETUP_MIPIPHY
select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
......@@ -283,10 +283,16 @@ config MACH_UNIVERSAL_C210
config MACH_NURI
bool "Mobile NURI Board"
select CPU_EXYNOS4210
select S5P_GPIO_INT
select S3C_DEV_WDT
select S3C_DEV_RTC
select S5P_DEV_FIMD0
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_I2C6
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
......@@ -294,41 +300,42 @@ config MACH_NURI
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_I2C6
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_CSIS0
select S5P_DEV_JPEG
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_I2C6
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select S5P_SETUP_MIPIPHY
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
config MACH_ORIGEN
bool "ORIGEN"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
......@@ -342,14 +349,6 @@ config MACH_ORIGEN
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select S3C24XX_PWM
help
Machine support for ORIGEN based on Samsung EXYNOS4210
......@@ -357,7 +356,17 @@ comment "EXYNOS4212 Boards"
config MACH_SMDK4212
bool "SMDK4212"
select SOC_EXYNOS4212
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
......@@ -375,17 +384,7 @@ config MACH_SMDK4212
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select S3C24XX_PWM
select SOC_EXYNOS4212
help
Machine support for Samsung SMDK4212
......@@ -393,8 +392,8 @@ comment "EXYNOS4412 Boards"
config MACH_SMDK4412
bool "SMDK4412"
select SOC_EXYNOS4412
select MACH_SMDK4212
select SOC_EXYNOS4412
help
Machine support for Samsung SMDK4412
endif
......@@ -404,12 +403,12 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
select CPU_EXYNOS4210
select USE_OF
select ARM_AMBA
select CPU_EXYNOS4210
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS4
select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
......@@ -419,9 +418,9 @@ config MACH_EXYNOS4_DT
config MACH_EXYNOS5_DT
bool "SAMSUNG EXYNOS5 Machine using device tree"
depends on ARCH_EXYNOS5
select ARM_AMBA
select SOC_EXYNOS5250
select USE_OF
select ARM_AMBA
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS5 SoC based board.
......
arch/arm/mach-footbridge/Kconfig
View file @ 244acb1b
......@@ -91,7 +91,7 @@ config FOOTBRIDGE_ADDIN
# EBSA285 board in either host or addin mode
config ARCH_EBSA285
select ARCH_MAY_HAVE_PC_FDC
bool
select ARCH_MAY_HAVE_PC_FDC
endif
arch/arm/mach-h720x/Kconfig
View file @ 244acb1b
......@@ -12,9 +12,9 @@ config ARCH_H7201
config ARCH_H7202
bool "hms30c7202"
depends on ARCH_H720X
select CPU_H7202
select ZONE_DMA
depends on ARCH_H720X
help
Say Y here if you are using the Hynix HMS30C7202 Reference Board
......
arch/arm/mach-imx/Kconfig
View file @ 244acb1b
This diff is collapsed.
arch/arm/mach-ixp4xx/Kconfig
View file @ 244acb1b
......@@ -234,8 +234,8 @@ config IXP4XX_QMGR
config IXP4XX_NPE
tristate "IXP4xx Network Processor Engine support"
select HOTPLUG
select FW_LOADER
select HOTPLUG
help
This driver supports IXP4xx built-in network coprocessors
and is automatically selected by Ethernet and HSS drivers.
......
arch/arm/mach-mmp/Kconfig
View file @ 244acb1b
......@@ -107,22 +107,22 @@ endmenu
config CPU_PXA168
bool
select CPU_MOHAWK
select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA168
config CPU_PXA910
bool
select CPU_MOHAWK
select COMMON_CLK
select CPU_MOHAWK
help
Select code specific to PXA910
config CPU_MMP2
bool
select CPU_PJ4
select COMMON_CLK
select CPU_PJ4
help
Select code specific to MMP2. MMP2 is ARMv7 compatible.
......
arch/arm/mach-msm/Kconfig
View file @ 244acb1b
......@@ -10,35 +10,35 @@ choice
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
select MACH_TROUT if !MACH_HALIBUT
select ARCH_MSM_ARM11
select MSM_SMD
select MSM_SMD_PKG3
select CPU_V6
select GPIO_MSM_V1
select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
select MSM_SMD
select MSM_SMD_PKG3
config ARCH_MSM7X30
bool "MSM7x30"
select MACH_MSM7X30_SURF # if !
select ARCH_MSM_SCORPION
select MSM_SMD
select MSM_VIC
select CPU_V7
select MSM_GPIOMUX
select GPIO_MSM_V1
select MACH_MSM7X30_SURF # if !
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select MSM_VIC
config ARCH_QSD8X50
bool "QSD8X50"
select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
select ARCH_MSM_SCORPION
select MSM_SMD
select MSM_VIC
select CPU_V7
select MSM_GPIOMUX
select GPIO_MSM_V1
select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
select MSM_VIC
endchoice
......@@ -47,10 +47,10 @@ config ARCH_MSM8X60
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM if SMP
select MSM_V2_TLMM
select USE_OF
config ARCH_MSM8960
......@@ -58,9 +58,9 @@ config ARCH_MSM8960
select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
select MSM_GPIOMUX
select MSM_SCM if SMP
select MSM_V2_TLMM
select USE_OF
config MSM_HAS_DEBUG_UART_HS
......@@ -110,8 +110,8 @@ config MACH_QSD8X50_SURF
config MACH_QSD8X50A_ST1_5
depends on ARCH_QSD8X50
select MSM_SOC_REV_A
bool "QSD8x50A ST1.5"
select MSM_SOC_REV_A
help
Support for the Qualcomm ST1.5.
......
arch/arm/mach-nomadik/Kconfig
View file @ 244acb1b
......@@ -4,8 +4,8 @@ menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
select NOMADIK_8815
select HAS_MTU
select NOMADIK_8815
endmenu
......@@ -16,7 +16,7 @@ config I2C_BITBANG_8815NHK
tristate "Driver for bit-bang busses found on the 8815 NHK"
depends on I2C && MACH_NOMADIK_8815NHK
depends on PINCTRL_NOMADIK
select I2C_ALGOBIT
default y
select I2C_ALGOBIT
endif
arch/arm/mach-omap1/Kconfig
View file @ 244acb1b
......@@ -8,15 +8,15 @@ comment "OMAP Core Type"
config ARCH_OMAP730
depends on ARCH_OMAP1
bool "OMAP730 Based System"
select ARCH_OMAP_OTG
select CPU_ARM926T
select OMAP_MPU_TIMER
select ARCH_OMAP_OTG
config ARCH_OMAP850
depends on ARCH_OMAP1
bool "OMAP850 Based System"
select CPU_ARM926T
select ARCH_OMAP_OTG
select CPU_ARM926T
config ARCH_OMAP15XX
depends on ARCH_OMAP1
......@@ -28,8 +28,8 @@ config ARCH_OMAP15XX
config ARCH_OMAP16XX
depends on ARCH_OMAP1
bool "OMAP16xx Based System"
select CPU_ARM926T
select ARCH_OMAP_OTG
select CPU_ARM926T
comment "OMAP Board Type"
depends on ARCH_OMAP1
......@@ -132,8 +132,8 @@ config MACH_OMAP_PALMTT
config MACH_SX1
bool "Siemens SX1"
select I2C
depends on ARCH_OMAP1 && ARCH_OMAP15XX
select I2C
help
Support for the Siemens SX1 phone. To boot the kernel,
you'll need a SX1 compatible bootloader; check out
......
arch/arm/mach-omap2/Kconfig
View file @ 244acb1b
......@@ -6,19 +6,19 @@ config ARCH_OMAP2PLUS_TYPICAL
bool "Typical OMAP configuration"
default y
select AEABI
select REGULATOR
select PM_RUNTIME
select VFP
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
select SERIAL_OMAP
select SERIAL_OMAP_CONSOLE
select HIGHMEM
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
select PINCTRL
select PM_RUNTIME
select REGULATOR
select SERIAL_OMAP
select SERIAL_OMAP_CONSOLE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select HIGHMEM
select PINCTRL
select VFP
help
Compile a kernel suitable for booting most boards
......@@ -40,44 +40,44 @@ config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_OMAP2PLUS
default y
select CPU_V7
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARCH_HAS_OPP
select PM_RUNTIME if CPU_IDLE
select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
select OMAP_INTERCONNECT
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select SOC_HAS_OMAP2_SDRC
select USB_ARCH_HAS_EHCI if USB_SUPPORT
config ARCH_OMAP4
bool "TI OMAP4"
default y
depends on ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_720789
select ARM_GIC
select CACHE_L2X0
select CPU_V7
select ARM_GIC
select HAVE_SMP
select LOCAL_TIMERS if SMP
select OMAP_INTERCONNECT
select PL310_ERRATA_588369
select PL310_ERRATA_727915
select ARM_ERRATA_720789
select ARCH_HAS_OPP
select PM_RUNTIME if CPU_IDLE
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"
select CPU_V7
select ARM_ARCH_TIMER
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
select HAVE_SMP
select ARM_CPU_SUSPEND if PM
select SOC_HAS_REALTIME_COUNTER
select ARM_ARCH_TIMER
comment "OMAP Core Type"
depends on ARCH_OMAP2
......@@ -109,8 +109,8 @@ config SOC_TI81XX
config SOC_AM33XX
bool "AM33XX support"
default y
select CPU_V7
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
config OMAP_PACKAGE_ZAF
......@@ -157,8 +157,8 @@ config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on SOC_OMAP2420
default y
select OMAP_PACKAGE_ZAF
select OMAP_DEBUG_DEVICES
select OMAP_PACKAGE_ZAF
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
......@@ -193,8 +193,8 @@ config MACH_OMAP_LDP
config MACH_OMAP3530_LV_SOM
bool "OMAP3 Logic 3530 LV SOM board"
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
default y
select OMAP_PACKAGE_CBB
help
Support for the LogicPD OMAP3530 SOM Development kit
for full description please see the products webpage at
......@@ -203,8 +203,8 @@ config MACH_OMAP3530_LV_SOM
config MACH_OMAP3_TORPEDO
bool "OMAP3 Logic 35x Torpedo board"
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
default y
select OMAP_PACKAGE_CBB
help
Support for the LogicPD OMAP35x Torpedo Development kit
for full description please see the products webpage at
......@@ -265,17 +265,17 @@ config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
select OMAP_PACKAGE_ZAC
select MACH_NOKIA_N800
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
select OMAP_PACKAGE_ZAC
config MACH_NOKIA_RM680
bool "Nokia RM-680/696 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select MACH_NOKIA_RM696
select OMAP_PACKAGE_CBB
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
......@@ -288,20 +288,20 @@ config MACH_OMAP_ZOOM2
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_CORE_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBP
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SERIAL_CORE_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
......@@ -329,8 +329,8 @@ config MACH_IGEP0030
bool "IGEP OMAP3 module"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select MACH_IGEP0020
select OMAP_PACKAGE_CBB
config MACH_SBC3530
bool "OMAP3 SBC STALKER board"
......
arch/arm/mach-prima2/Kconfig
View file @ 244acb1b
......@@ -6,8 +6,8 @@ config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
default y
select CPU_V7
select ZONE_DMA
select SIRF_IRQ
select ZONE_DMA
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
......
arch/arm/mach-pxa/Kconfig
View file @ 244acb1b
......@@ -27,10 +27,10 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
select PXA3xx
select CPU_PXA300
select POWER_SUPPLY
select HAVE_PWM
select POWER_SUPPLY
select PXA3xx
select USE_OF
help
Include support for Marvell PXA3xx based platforms using
......@@ -44,13 +44,13 @@ config ARCH_LUBBOCK
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
select PXA27x
select HAVE_PWM
select PXA27x
config MACH_ZYLONITE
bool
select PXA3xx
select HAVE_PWM
select PXA3xx
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
......@@ -65,19 +65,19 @@ config MACH_ZYLONITE320
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
select CPU_PXA930
select PXA3xx
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
select PXA3xx
comment "Third Party Dev Platforms (sorted by vendor name)"
......@@ -87,29 +87,29 @@ config ARCH_PXA_IDP
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select PXA25x
select ISA
select I2C_GPIO
select ARCOM_PCMCIA
select HAVE_PWM
select I2C_GPIO
select ISA
select PXA25x
select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
select PXA27x
select ARCOM_PCMCIA
select ISA
select PXA27x
select PXA_HAVE_ISA_IRQS
select ARCOM_PCMCIA
config MACH_BALLOON3
bool "Balloon 3 board"
select PXA27x
select IWMMXT
select PXA27x
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
select PXA27x
select IWMMXT
select PXA27x
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
......@@ -121,11 +121,11 @@ config CSB726_CSB701
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
select PXA27x
select IWMMXT
select PXA25x
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H if PCI
select PXA25x
select PXA27x
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
......@@ -137,10 +137,10 @@ config MACH_EXEDA
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
select PXA3xx
select CPU_PXA300
select CPU_PXA310
select HAVE_PWM
select PXA3xx
config MACH_CAPC7117
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
......@@ -168,22 +168,22 @@ endchoice
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
select PXA27x
select IWMMXT
select PXA27x
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
select PXA27x
select IWMMXT
select PXA27x
config MACH_XCEP
bool "Iskratel Electronics XCEP"
select PXA25x
select MTD
select MTD_PHYSMAP
select MTD_CFI_INTELEXT
select MTD_CFI
select MTD_CFI_INTELEXT
select MTD_CHAR
select MTD_PHYSMAP
select PXA25x
select SMC91X
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
......@@ -195,14 +195,14 @@ config TRIZEPS_PXA
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
select PXA27x
select TRIZEPS_PCMCIA
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
select PXA27x
select TRIZEPS_PCMCIA
choice
prompt "Select base board for Trizeps module"
......@@ -231,18 +231,18 @@ config TRIZEPS_PCMCIA
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
select HAVE_PWM
select PXA27x
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
select PXA27x
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
depends on MACH_PCM027
select HAVE_PWM
choice
prompt "display on pcm990"
......@@ -266,19 +266,19 @@ config MACH_COLIBRI
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
select PXA27x
select HAVE_PWM
select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select PXA3xx
select CPU_PXA300
select CPU_PXA310
select PXA3xx
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select PXA3xx
select CPU_PXA320
select PXA3xx
config MACH_COLIBRI_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
......@@ -286,8 +286,8 @@ config MACH_COLIBRI_EVALBOARD
config MACH_VPAC270
bool "Voipac PXA270"
select PXA27x
select HAVE_PATA_PLATFORM
select PXA27x
help
PXA270 based Single Board Computer.
......@@ -295,9 +295,9 @@ comment "End-user Products (sorted by vendor name)"
config MACH_H4700
bool "HP iPAQ hx4700"
select PXA27x
select IWMMXT
select HAVE_PWM
select IWMMXT
select PXA27x
config MACH_H5000
bool "HP iPAQ h5000"
......@@ -309,16 +309,16 @@ config MACH_HIMALAYA
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
select HAVE_PWM
select IWMMXT
select PXA27x
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
select IWMMXT
select HAVE_PWM
select GPIO_SYSFS
select HAVE_PWM
select IWMMXT
select PXA27x
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
......@@ -326,9 +326,9 @@ config MACH_MIOA701
config PXA_EZX
bool "Motorola EZX Platform"
select PXA27x
select IWMMXT
select HAVE_PWM
select IWMMXT
select PXA27x
config MACH_EZX_A780
bool "Motorola EZX A780"
......@@ -393,9 +393,9 @@ config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
......@@ -404,9 +404,9 @@ config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
......@@ -415,9 +415,9 @@ config MACH_PALMZ72
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
......@@ -426,9 +426,9 @@ config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select MACH_PALM27X
select PXA27x
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
......@@ -441,10 +441,10 @@ config MACH_CENTRO
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
select MACH_PALM27X
select PXA27x
select IWMMXT
select MACH_PALM27X
select PALM_TREO
select PXA27x
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
......@@ -453,37 +453,37 @@ config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select MACH_PALM27X
select PXA27x
select IWMMXT
select MACH_PALM27X
select PALM_TREO
select PXA27x
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config MACH_RAUMFELD_RC
bool "Raumfeld Controller"
select PXA3xx
select CPU_PXA300
select POWER_SUPPLY
select HAVE_PWM
select POWER_SUPPLY
select PXA3xx
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
select CPU_PXA300
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
select CPU_PXA300
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select SHARP_SCOOP
select SHARP_PARAM
select SHARP_SCOOP
help
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
......@@ -526,11 +526,11 @@ config MACH_HUSKY
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
select I2C_PXA
select MACH_SPITZ
select PXA27x
select PXA_SHARP_Cxx00
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
......@@ -575,8 +575,8 @@ config MACH_ICONTROL
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
select FB_W100
select PXA25x
config MACH_E330
bool "Toshiba e330"
......@@ -628,8 +628,8 @@ config MACH_E800
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
select PXA27x
select HAVE_PWM
select PXA27x
endif
endmenu
......@@ -720,9 +720,9 @@ config SHARPSL_PM
config SHARPSL_PM_MAX1111
bool
select HWMON
select SENSORS_MAX1111
select SPI
select SPI_MASTER
select SENSORS_MAX1111
config PXA_HAVE_ISA_IRQS
bool
......
arch/arm/mach-realview/Kconfig
View file @ 244acb1b
......@@ -21,8 +21,8 @@ config REALVIEW_EB_A9MP
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore Tile"
depends on MACH_REALVIEW_EB
select CPU_V6K
select ARCH_HAS_BARRIERS if SMP
select CPU_V6K
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
......@@ -40,12 +40,12 @@ config REALVIEW_EB_ARM11MP_REVB
config MACH_REALVIEW_PB11MP
bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
select CPU_V6K
select ARCH_HAS_BARRIERS if SMP
select ARM_GIC
select CPU_V6K
select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_BARRIERS if SMP
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
the ARM11MPCore. This platform has an on-board ARM11MPCore and has
......@@ -54,8 +54,8 @@ config MACH_REALVIEW_PB11MP
# ARMv6 CPU without K extensions, but does have the new exclusive ops
config MACH_REALVIEW_PB1176
bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
select CPU_V6
select ARM_GIC
select CPU_V6
select HAVE_TCM
select MIGHT_HAVE_CACHE_L2X0
help
......@@ -73,8 +73,8 @@ config REALVIEW_PB1176_SECURE_FLASH
config MACH_REALVIEW_PBA8
bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
select CPU_V7
select ARM_GIC
select CPU_V7
select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView Platform Baseboard for
......@@ -83,11 +83,11 @@ config MACH_REALVIEW_PBA8
config MACH_REALVIEW_PBX
bool "Support RealView(R) Platform Baseboard Explore"
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ARM_GIC
select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ZONE_DMA if SPARSEMEM
help
Include support for the ARM(R) RealView(R) Platform Baseboard
......
arch/arm/mach-s3c2412/Kconfig
View file @ 244acb1b
......@@ -7,7 +7,7 @@
config S3C2412_CPUFREQ
bool
depends on CPU_FREQ_S3C24XX && CPU_S3C2412
select S3C2412_IOTIMING
default y
select S3C2412_IOTIMING
help
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
arch/arm/mach-s3c2440/Kconfig
View file @ 244acb1b
......@@ -5,8 +5,8 @@
config S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
select S3C2410_CPUFREQ_UTILS
default y
select S3C2410_CPUFREQ_UTILS
help
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
......
arch/arm/mach-s3c24xx/Kconfig
View file @ 244acb1b
......@@ -17,10 +17,10 @@ config CPU_S3C2410
bool "SAMSUNG S3C2410"
default y
select CPU_ARM920T
select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
select S3C2410_PM if PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
......@@ -30,8 +30,8 @@ config CPU_S3C2412
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
......@@ -40,10 +40,10 @@ config CPU_S3C2416
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2416_PM if PM
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select S3C2416_PM if PM
select SAMSUNG_CLKSRC
help
Support for the S3C2416 SoC from the S3C24XX line
......@@ -75,9 +75,9 @@ config CPU_S3C2443
depends on ARCH_S3C24XX
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
help
Support for the S3C2443 SoC from the S3C24XX line
......@@ -156,16 +156,16 @@ config MACH_AML_M5900
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select ISA
select MACH_BAST_IDE
select S3C2410_IOTIMING if S3C2410_CPUFREQ
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
select MACH_BAST_IDE
select S3C24XX_DCLK
select ISA
select S3C_DEV_HWMON
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
......@@ -181,9 +181,9 @@ config BAST_PC104_IRQ
config ARCH_H1940
bool "IPAQ H1940"
select PM_H1940 if PM
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C24XX_SETUP_TS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the HP IPAQ H1940
......@@ -203,23 +203,23 @@ config PM_H1940
config MACH_N30
bool "Acer N30 family"
select MACH_N35
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
config MACH_OTOM
bool "NexVision OTOM Board"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision OTOM board
config MACH_QT2410
bool "QT2410"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Armzone QT2410
......@@ -239,12 +239,12 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
select S3C24XX_SIMTEC_PM if PM
select MACH_BAST_IDE
select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
select MACH_BAST_IDE
select S3C_DEV_USB_HOST
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
......@@ -285,8 +285,8 @@ comment "S3C2412 Boards"
config MACH_JIVE
bool "Logitech Jive"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Logitech Jive.
......@@ -314,15 +314,15 @@ config MACH_SMDK2413
bool "SMDK2413"
select MACH_S3C2413
select S3C24XX_SMDK
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using an SMDK2413
config MACH_VSTMS
bool "VMSTMS"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using an VSTMS board
......@@ -351,13 +351,13 @@ comment "S3C2416 Boards"
config MACH_SMDK2416
bool "SMDK2416"
select S3C2416_SETUP_SDHCI
select S3C24XX_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select S3C2416_SETUP_SDHCI
help
Say Y here if you are using an SMDK2416
......@@ -379,11 +379,11 @@ comment "S3C2440 Boards"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select S3C24XX_DCLK
select S3C24XX_SIMTEC_PM if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
select S3C24XX_GPIO_EXTRA64
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
......@@ -391,18 +391,18 @@ config MACH_ANUBIS
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the AT2440EVB development board
config MACH_MINI2440
bool "MINI2440 development board"
select EEPROM_AT24
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
select NEW_LEDS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
......@@ -412,20 +412,20 @@ config MACH_MINI2440
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_GPIO_EXTRA128
select S3C2440_XTAL_12000000
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C_DEV_USB_HOST
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
......@@ -445,8 +445,8 @@ config MACH_OSIRIS_DVS
config MACH_RX3715
bool "HP iPAQ rx3715"
select S3C2440_XTAL_16934400
select PM_H1940 if PM
select S3C2440_XTAL_16934400
select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
......@@ -455,8 +455,8 @@ config ARCH_S3C2440
bool "SMDK2440"
select S3C2440_XTAL_16934400
select S3C24XX_SMDK
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here if you are using the SMDK2440.
......@@ -478,11 +478,11 @@ comment "S3C2442 Boards"
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
select I2C
select MACH_NEO1973
select MFD_PCF50633
select PCF50633_GPIO
select I2C
select POWER_SUPPLY
select MACH_NEO1973
select S3C24XX_PWM
select S3C_DEV_USB_HOST
help
......@@ -490,13 +490,13 @@ config MACH_NEO1973_GTA02
config MACH_RX1950
bool "HP iPAQ rx1950"
select S3C24XX_DCLK
select PM_H1940 if PM
select I2C
select S3C24XX_PWM
select S3C_DEV_NAND
select PM_H1940 if PM
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
select S3C24XX_DCLK
select S3C24XX_PWM
select S3C_DEV_NAND
help
Say Y here if you're using HP iPAQ rx1950
......
arch/arm/mach-s3c64xx/Kconfig
View file @ 244acb1b
......@@ -7,9 +7,9 @@
config PLAT_S3C64XX
bool
depends on ARCH_S3C64XX
select SAMSUNG_WAKEMASK
select PM_GENERIC_DOMAINS
default y
select PM_GENERIC_DOMAINS
select SAMSUNG_WAKEMASK
help
Base platform code for any Samsung S3C64XX device
......@@ -31,8 +31,8 @@ config S3C64XX_DMA
select S3C_DMA
config S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_SDHCI_GPIO
bool
select S3C64XX_SETUP_SDHCI_GPIO
help
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
......@@ -93,9 +93,9 @@ config S3C64XX_SETUP_USB_PHY
config MACH_SMDK6400
bool "SMDK6400"
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
select S3C_DEV_HSMMC
select S3C_DEV_NAND
select S3C64XX_SETUP_SDHCI
help
Machine support for the Samsung SMDK6400
......@@ -104,21 +104,21 @@ config MACH_SMDK6400
config MACH_ANW6410
bool "A&W6410"
select CPU_S3C6410
select S3C_DEV_FB
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
help
Machine support for the A&W6410
config MACH_MINI6410
bool "MINI6410"
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C64XX_SETUP_SDHCI
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C_DEV_FB
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
help
......@@ -127,42 +127,42 @@ config MACH_MINI6410
config MACH_REAL6410
bool "REAL6410"
select CPU_S3C6410
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C_DEV_FB
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
help
Machine support for the CoreWind REAL6410
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
select SAMSUNG_DEV_ADC
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_KEYPAD
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_USB_PHY
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select SAMSUNG_DEV_IDE
select S3C_DEV_FB
select S3C_DEV_RTC
select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
select S3C64XX_SETUP_USB_PHY
select SAMSUNG_DEV_TS
help
Machine support for the Samsung SMDK6410
......@@ -198,13 +198,13 @@ endchoice
config SMDK6410_WM1190_EV1
bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
depends on MACH_SMDK6410
select REGULATOR
select REGULATOR_WM8350
select SAMSUNG_GPIO_EXTRA64
select MFD_WM8350_I2C
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8350_CONFIG_MODE_3
select MFD_WM8350_I2C
select MFD_WM8352_CONFIG_MODE_0
select REGULATOR
select REGULATOR_WM8350
select SAMSUNG_GPIO_EXTRA64
help
The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
and audio daughtercard for the Samsung SMDK6410 reference
......@@ -216,11 +216,11 @@ config SMDK6410_WM1190_EV1
config SMDK6410_WM1192_EV1
bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
depends on MACH_SMDK6410
select MFD_WM831X
select MFD_WM831X_I2C
select REGULATOR
select REGULATOR_WM831X
select SAMSUNG_GPIO_EXTRA64
select MFD_WM831X
select MFD_WM831X_I2C
help
The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
daughtercard for the Samsung SMDK6410 reference platform.
......@@ -232,19 +232,19 @@ config SMDK6410_WM1192_EV1
config MACH_NCP
bool "NCP"
select CPU_S3C6410
select S3C_DEV_I2C1
select S3C_DEV_HSMMC1
select S3C64XX_SETUP_I2C1
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
help
Machine support for the Samsung NCP
config MACH_HMT
bool "Airgoo HMT"
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select S3C64XX_SETUP_FB_24BPP
select SAMSUNG_DEV_PWM
help
Machine support for the Airgoo HMT
......@@ -252,17 +252,17 @@ config MACH_HMT
config MACH_SMARTQ
bool
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_USB_PHY
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_FB
select S3C_DEV_HWMON
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_USB_HOST
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_USB_PHY
select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
......@@ -284,26 +284,26 @@ config MACH_SMARTQ7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
select CPU_S3C6410
select S3C64XX_SETUP_SDHCI
select I2C
select LEDS_GPIO_REGISTER
select S3C64XX_DEV_SPI0
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_SPI
select S3C64XX_SETUP_USB_PHY
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_WDT
select S3C_DEV_RTC
select S3C64XX_DEV_SPI0
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_GPIO_EXTRA128
select I2C
select LEDS_GPIO_REGISTER
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
arch/arm/mach-s5p64x0/Kconfig
View file @ 244acb1b
......@@ -9,18 +9,18 @@ if ARCH_S5P64X0
config CPU_S5P6440
bool
select SAMSUNG_DMADEV
select S5P_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
select SAMSUNG_DMADEV
select S5P_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6450 CPU support
......@@ -52,19 +52,19 @@ config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
select S3C_DEV_FB
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
select S5P64X0_SETUP_SDHCI_GPIO
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6440
......@@ -72,19 +72,19 @@ config MACH_SMDK6450
bool "SMDK6450"
select CPU_S5P6450
select S3C_DEV_FB
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
select S5P64X0_SETUP_SDHCI_GPIO
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6450
......
arch/arm/mach-s5pc100/Kconfig
View file @ 244acb1b
......@@ -60,12 +60,6 @@ config MACH_SMDKC100
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
select S5PC100_SETUP_FB_24BPP
select S5PC100_SETUP_I2C1
select S5PC100_SETUP_IDE
......@@ -74,6 +68,12 @@ config MACH_SMDKC100
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
help
Machine support for the Samsung SMDKC100
......
arch/arm/mach-s5pv210/Kconfig
View file @ 244acb1b
......@@ -11,11 +11,11 @@ if ARCH_S5PV210
config CPU_S5PV210
bool
select SAMSUNG_DMADEV
select S5P_EXT_INT
select S5P_HRT
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable S5PV210 CPU support
......@@ -76,44 +76,44 @@ config MACH_AQUILA
bool "Aquila"
select CPU_S5PV210
select S3C_DEV_FB
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S5P_DEV_ONENAND
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_SDHCI
select S5PV210_SETUP_USB_PHY
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_ONENAND
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
config MACH_GONI
bool "GONI"
select CPU_S5PV210
select S5P_GPIO_INT
select S3C_DEV_FB
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select S5P_DEV_MFC
select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
select SAMSUNG_DEV_KEYPAD
select S5P_DEV_TV
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_FIMC
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
select S5PV210_SETUP_FIMC
select S5PV210_SETUP_USB_PHY
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
select S5P_GPIO_INT
select SAMSUNG_DEV_KEYPAD
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
......@@ -125,14 +125,14 @@ config MACH_SMDKC110
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_MFC
select SAMSUNG_DEV_IDE
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
help
Machine support for Samsung SMDKC110
S5PC110(MCP) is one of package option of S5PV210
......@@ -154,6 +154,13 @@ config MACH_SMDKV210
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
select S5PV210_SETUP_USB_PHY
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
......@@ -165,20 +172,13 @@ config MACH_SMDKV210
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
select S5PV210_SETUP_USB_PHY
help
Machine support for Samsung SMDKV210
config MACH_TORBRECK
bool "Torbreck"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select CPU_S5PV210
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
......
arch/arm/mach-sa1100/Kconfig
View file @ 244acb1b
......@@ -49,15 +49,15 @@ config SA1100_COLLIE
bool "Sharp Zaurus SL5500"
# FIXME: select CPU_FREQ_SA11x0
select SHARP_LOCOMO
select SHARP_SCOOP
select SHARP_PARAM
select SHARP_SCOOP
help
Say Y here to support the Sharp Zaurus SL5500 PDAs.
config SA1100_H3100
bool "Compaq iPAQ H3100"
select HTC_EGPIO
select CPU_FREQ_SA1110
select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
......@@ -67,8 +67,8 @@ config SA1100_H3100
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
select HTC_EGPIO
select CPU_FREQ_SA1110
select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
......@@ -78,16 +78,16 @@ config SA1100_H3600
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
select SA1111
select CPU_FREQ_SA1100
select SA1111
help
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
config SA1100_JORNADA720
bool "HP Jornada 720"
select SA1111
# FIXME: select CPU_FREQ_SA11x0
select SA1111
help
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See
......@@ -95,8 +95,8 @@ config SA1100_JORNADA720
config SA1100_JORNADA720_SSP
bool "HP Jornada 720 Extended SSP driver"
select SA1100_SSP
depends on SA1100_JORNADA720
select SA1100_SSP
help
Say Y here if you have a HP Jornada 7xx handheld computer and you
want to access devices connected to the MCU. Those include the
......
arch/arm/mach-shmobile/Kconfig
View file @ 244acb1b
......@@ -4,49 +4,49 @@ comment "SH-Mobile System Type"
config ARCH_SH7367
bool "SH-Mobile G3 (SH7367)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select CPU_V6
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_SH7377
bool "SH-Mobile G4 (SH7377)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select CPU_V7
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_SH7372
bool "SH-Mobile AP4 (SH7372)"
select CPU_V7
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_CPU_SUSPEND if PM || CPU_IDLE
select CPU_V7
select SH_CLK_CPG
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select CPU_V7
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select I2C
select SH_CLK_CPG
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select CPU_V7
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
select ARM_GIC
select ARCH_WANT_OPTIONAL_GPIOLIB
config ARCH_EMEV2
bool "Emma Mobile EV2"
select CPU_V7
select ARM_GIC
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
comment "SH-Mobile Board Type"
......@@ -65,9 +65,9 @@ config MACH_AP4EVB
bool "AP4EVB board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
choice
prompt "AP4EVB LCD panel selection"
......@@ -84,37 +84,37 @@ endchoice
config MACH_AG5EVM
bool "AG5EVM board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select SH_LCD_MIPI_DSI
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on ARCH_SH73A0
select SH_LCD_MIPI_DSI
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
config MACH_KOTA2
bool "KOTA2 board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on ARCH_SH73A0
config MACH_BONITO
bool "bonito board"
depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on ARCH_R8A7740
config MACH_ARMADILLO800EVA
bool "Armadillo-800 EVA board"
depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
select USE_OF
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_WM8978 if SND_SIMPLE_CARD
select USE_OF
config MACH_MARZEN
bool "MARZEN board"
......@@ -125,16 +125,16 @@ config MACH_MARZEN
config MACH_KZM9D
bool "KZM9D board"
depends on ARCH_EMEV2
select USE_OF
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
select USE_OF
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
comment "SH-Mobile System Configuration"
......
arch/arm/mach-tegra/Kconfig
View file @ 244acb1b
......@@ -4,42 +4,42 @@ comment "NVIDIA Tegra options"
config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family"
select CPU_V7
select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
select PINCTRL
select PINCTRL_TEGRA20
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB
select USB_ULPI_VIEWPORT if USB_SUPPORT
select ARM_ERRATA_720789
select ARM_ERRATA_742230
select ARM_ERRATA_751472
select ARM_ERRATA_754327
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CPU_FREQ_TABLE if CPU_FREQ
select CPU_V7
select PINCTRL
select PINCTRL_TEGRA20
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
select CPU_FREQ_TABLE if CPU_FREQ
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB
select USB_ULPI_VIEWPORT if USB_SUPPORT
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
config ARCH_TEGRA_3x_SOC
bool "Enable support for Tegra30 family"
select CPU_V7
select ARM_GIC
select ARCH_REQUIRE_GPIOLIB
select PINCTRL
select PINCTRL_TEGRA30
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB
select USB_ULPI_VIEWPORT if USB_SUPPORT
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select PL310_ERRATA_769419 if CACHE_L2X0
select ARM_GIC
select CPU_FREQ_TABLE if CPU_FREQ
select CPU_V7
select PINCTRL
select PINCTRL_TEGRA30
select PL310_ERRATA_769419 if CACHE_L2X0
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB
select USB_ULPI_VIEWPORT if USB_SUPPORT
help
Support for NVIDIA Tegra T30 processor family, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
......
arch/arm/mach-u300/Kconfig
View file @ 244acb1b
......@@ -7,8 +7,8 @@ comment "ST-Ericsson Mobile Platform Products"
config MACH_U300
bool "U300"
select PINCTRL
select PINCTRL_U300
select PINCTRL_COH901
select PINCTRL_U300
comment "ST-Ericsson U300/U335 Feature Selections"
......
arch/arm/mach-ux500/Kconfig
View file @ 244acb1b
......@@ -3,33 +3,33 @@ if ARCH_U8500
config UX500_SOC_COMMON
bool
default y
select ARM_GIC
select HAS_MTU
select PL310_ERRATA_753970 if CACHE_PL310
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CACHE_L2X0
select COMMON_CLK
select HAS_MTU
select PINCTRL
select PINCTRL_NOMADIK
select COMMON_CLK
select PL310_ERRATA_753970 if CACHE_PL310
config UX500_SOC_DB8500
bool
select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
select REGULATOR
select REGULATOR_DB8500_PRCMU
select CPU_FREQ_TABLE if CPU_FREQ
select PINCTRL_DB8500
menu "Ux500 target platform (boards)"
config MACH_MOP500
bool "U8500 Development platform, MOP500 versions"
select UX500_SOC_DB8500
select I2C
select I2C_NOMADIK
select SOC_BUS
select REGULATOR_FIXED_VOLTAGE
select SOC_BUS
select UX500_SOC_DB8500
help
Include support for the MOP500 development platform.
......
arch/arm/mach-versatile/Kconfig
View file @ 244acb1b
......@@ -3,9 +3,9 @@ menu "Versatile platform type"
config ARCH_VERSATILE_PB
bool "Support Versatile Platform Baseboard for ARM926EJ-S"
default y
select CPU_ARM926T
select MIGHT_HAVE_PCI
default y
help
Include support for the ARM(R) Versatile Platform Baseboard
for the ARM926EJ-S.
......@@ -19,8 +19,8 @@ config MACH_VERSATILE_AB
config MACH_VERSATILE_DT
bool "Support Versatile platform from device tree"
select USE_OF
select CPU_ARM926T
select USE_OF
help
Include support for the ARM(R) Versatile/PB platform,
using the device tree for discovery
......
arch/arm/mm/Kconfig
View file @ 244acb1b
......@@ -10,8 +10,8 @@ config CPU_ARM7TDMI
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_PABRT_LEGACY
select CPU_CACHE_V4
select CPU_PABRT_LEGACY
help
A 32-bit RISC microprocessor based on the ARM7 processor core
which has no memory control unit and cache.
......@@ -24,11 +24,11 @@ config CPU_ARM720T
bool "Support ARM720T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_PABRT_LEGACY
select CPU_CACHE_V4
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WT if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WT if MMU
help
A 32-bit RISC processor with 8kByte Cache, Write Buffer and
......@@ -43,9 +43,9 @@ config CPU_ARM740T
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_PABRT_LEGACY
select CPU_CACHE_V3 # although the core is v4t
select CPU_CP15_MPU
select CPU_PABRT_LEGACY
help
A 32-bit RISC processor with 8KB cache or 4KB variants,
write buffer and MPU(Protection Unit) built around
......@@ -60,8 +60,8 @@ config CPU_ARM9TDMI
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
select CPU_PABRT_LEGACY
select CPU_CACHE_V4
select CPU_PABRT_LEGACY
help
A 32-bit RISC microprocessor based on the ARM9 processor core
which has no memory control unit and cache.
......@@ -74,11 +74,11 @@ config CPU_ARM920T
bool "Support ARM920T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM920T is licensed to be produced by numerous vendors,
......@@ -92,11 +92,11 @@ config CPU_ARM922T
bool "Support ARM922T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM922T is a version of the ARM920T, but with smaller
......@@ -111,11 +111,11 @@ config CPU_ARM925T
bool "Support ARM925T processor" if ARCH_OMAP1
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM925T is a mix between the ARM920T and ARM926T, but with
......@@ -130,10 +130,10 @@ config CPU_ARM926T
bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
This is a variant of the ARM920. It has slightly different
......@@ -148,11 +148,11 @@ config CPU_FA526
bool
select CPU_32v4
select CPU_ABRT_EV4
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_CACHE_FA
select CPU_CACHE_VIVT
select CPU_COPY_FA if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_FA if MMU
help
The FA526 is a version of the ARMv4 compatible processor with
......@@ -167,9 +167,9 @@ config CPU_ARM940T
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
select CPU_PABRT_LEGACY
help
ARM940T is a member of the ARM9TDMI family of general-
purpose microprocessors with MPU and separate 4KB
......@@ -185,9 +185,9 @@ config CPU_ARM946E
depends on !MMU
select CPU_32v5
select CPU_ABRT_NOMMU
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
select CPU_PABRT_LEGACY
help
ARM946E-S is a member of the ARM9E-S family of high-
performance, 32-bit system-on-chip processor solutions.
......@@ -201,11 +201,11 @@ config CPU_ARM1020
bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM1020 is the 32K cached version of the ARM10 processor,
......@@ -217,25 +217,25 @@ config CPU_ARM1020
# ARM1020E - needs validating
config CPU_ARM1020E
bool "Support ARM1020E processor" if ARCH_INTEGRATOR
depends on n
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
depends on n
# ARM1022E
config CPU_ARM1022
bool "Support ARM1022E processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM1022E is an implementation of the ARMv5TE architecture
......@@ -250,10 +250,10 @@ config CPU_ARM1026
bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
help
The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
......@@ -268,11 +268,11 @@ config CPU_SA110
select CPU_32v3 if ARCH_RPC
select CPU_32v4 if !ARCH_RPC
select CPU_ABRT_EV4
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WB if MMU
help
The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
......@@ -288,10 +288,10 @@ config CPU_SA1100
bool
select CPU_32v4
select CPU_ABRT_EV4
select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WB if MMU
# XScale
......@@ -299,9 +299,9 @@ config CPU_XSCALE
bool
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
# XScale Core Version 3
......@@ -309,9 +309,9 @@ config CPU_XSC3
bool
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
select IO_36
......@@ -320,21 +320,21 @@ config CPU_MOHAWK
bool
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_COPY_V4WB if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_V4WBI if MMU
select CPU_COPY_V4WB if MMU
# Feroceon
config CPU_FEROCEON
bool
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_FEROCEON if MMU
select CPU_CP15_MMU
select CPU_PABRT_LEGACY
select CPU_TLB_FEROCEON if MMU
config CPU_FEROCEON_OLD_ID
......@@ -349,20 +349,20 @@ config CPU_FEROCEON_OLD_ID
# Marvell PJ4
config CPU_PJ4
bool
select CPU_V7
select ARM_THUMBEE
select CPU_V7
# ARMv6
config CPU_V6
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_V6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_HAS_ASID if MMU
select CPU_COPY_V6 if MMU
select CPU_PABRT_V6
select CPU_TLB_V6 if MMU
# ARMv6k
......@@ -371,12 +371,12 @@ config CPU_V6K
select CPU_32v6
select CPU_32v6K
select CPU_ABRT_EV6
select CPU_PABRT_V6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_HAS_ASID if MMU
select CPU_COPY_V6 if MMU
select CPU_PABRT_V6
select CPU_TLB_V6 if MMU
# ARMv7
......@@ -385,44 +385,44 @@ config CPU_V7
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
select CPU_PABRT_V7
select CPU_CACHE_V7
select CPU_CACHE_VIPT
select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_HAS_ASID if MMU
select CPU_COPY_V6 if MMU
select CPU_PABRT_V7
select CPU_TLB_V7 if MMU
# Figure out what processor architecture version we should be using.
# This defines the compiler instruction set which depends on the machine type.
config CPU_32v3
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4T
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v5
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
select TLS_REG_EMUL if SMP || !MMU
config CPU_32v6
bool
select TLS_REG_EMUL if !CPU_32v6K && !MMU
select CPU_USE_DOMAINS if CPU_V6 && MMU
select TLS_REG_EMUL if !CPU_32v6K && !MMU
config CPU_32v6K
bool
......@@ -644,8 +644,8 @@ config ARM_VIRT_EXT
config SWP_EMULATE
bool "Emulate SWP/SWPB instructions"
depends on !CPU_USE_DOMAINS && CPU_V7
select HAVE_PROC_CPU if PROC_FS
default y if SMP
select HAVE_PROC_CPU if PROC_FS
help
ARMv6 architecture deprecates use of the SWP/SWPB instructions.
ARMv7 multiprocessing extensions introduce the ability to disable
......
arch/arm/plat-mxc/Kconfig
View file @ 244acb1b
......@@ -10,16 +10,16 @@ choice
config ARCH_IMX_V4_V5
bool "i.MX1, i.MX21, i.MX25, i.MX27"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR if !ZBOOT_ROM
help
This enables support for systems based on the Freescale i.MX ARMv4
and ARMv5 SoCs
config ARCH_IMX_V6_V7
bool "i.MX3, i.MX5, i.MX6"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR if !ZBOOT_ROM
select MIGHT_HAVE_CACHE_L2X0
help
This enables support for systems based on the Freescale i.MX3, i.MX5
......
arch/arm/plat-mxc/devices/Kconfig
View file @ 244acb1b
......@@ -3,8 +3,8 @@ config IMX_HAVE_PLATFORM_FEC
default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
config IMX_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN if CAN
bool
select HAVE_CAN_FLEXCAN if CAN
config IMX_HAVE_PLATFORM_FSL_USB2_UDC
bool
......
arch/arm/plat-nomadik/Kconfig
View file @ 244acb1b
......@@ -5,8 +5,8 @@
config PLAT_NOMADIK
bool
depends on ARCH_NOMADIK || ARCH_U8500
select CLKSRC_MMIO
default y
select CLKSRC_MMIO
help
Common platform code for Nomadik and other ST-Ericsson
platforms.
......
arch/arm/plat-omap/Kconfig
View file @ 244acb1b
......@@ -14,10 +14,10 @@ config ARCH_OMAP1
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select HAVE_IDE
select NEED_MACH_MEMORY_H
select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
select NEED_MACH_MEMORY_H
help
"Systems based on omap7xx, omap15xx or omap16xx"
......@@ -25,10 +25,10 @@ config ARCH_OMAP2PLUS
bool "TI OMAP2/3/4"
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select SPARSE_IRQ
select OMAP_DM_TIMER
select USE_OF
select PROC_DEVICETREE if PROC_FS
select SPARSE_IRQ
select USE_OF
help
"Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
......@@ -43,8 +43,8 @@ config OMAP_DEBUG_DEVICES
config OMAP_DEBUG_LEDS
def_bool y if NEW_LEDS
select LEDS_CLASS
depends on OMAP_DEBUG_DEVICES
select LEDS_CLASS
config POWER_AVS_OMAP
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
......
arch/arm/plat-s3c24xx/Kconfig
View file @ 244acb1b
......@@ -6,8 +6,8 @@ config PLAT_S3C24XX
bool
depends on ARCH_S3C24XX
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select NO_IOPORT
select S3C_DEV_NAND
help
Base platform code for any Samsung S3C24XX device
......
arch/arm/plat-samsung/Kconfig
View file @ 244acb1b
......@@ -7,9 +7,9 @@
config PLAT_SAMSUNG
bool
depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
select NO_IOPORT
select GENERIC_IRQ_CHIP
default y
select GENERIC_IRQ_CHIP
select NO_IOPORT
help
Base platform code for all Samsung SoC based systems
......@@ -17,16 +17,16 @@ config PLAT_S5P
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
default y
select ARM_VIC if !ARCH_EXYNOS
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC if ARCH_EXYNOS
select ARM_VIC if !ARCH_EXYNOS
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select PLAT_SAMSUNG
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
select PLAT_SAMSUNG
select SAMSUNG_CLKSRC
select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_IRQ_VIC_TIMER
help
Base platform code for Samsung's S5P series SoC.
......@@ -423,10 +423,10 @@ config S3C_DMA
config SAMSUNG_DMADEV
bool
select ARM_AMBA
select DMADEVICES
select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
CPU_S5P6450 || CPU_S5P6440)
select ARM_AMBA
help
Use DMA device engine for PL330 DMAC.
......
arch/arm/plat-spear/Kconfig
View file @ 244acb1b
......@@ -12,10 +12,10 @@ config ARCH_SPEAR13XX
bool "ST SPEAr13xx with Device Tree"
select ARM_GIC
select CPU_V7
select USE_OF
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select USE_OF
help
Supports for ARM's SPEAR13XX family
......@@ -23,8 +23,8 @@ config ARCH_SPEAR3XX
bool "ST SPEAr3xx with Device Tree"
select ARM_VIC
select CPU_ARM926T
select USE_OF
select PINCTRL
select USE_OF
help
Supports for ARM's SPEAR3XX family
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7