Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/ppc64-2.6

MAINTAINERS

@@ -504,6 +504,13 @@ L:   bonding-devel@lists.sourceforge.net
 W:   http://sourceforge.net/projects/bonding/
 S:   Supported
 
+BROADBAND PROCESSOR ARCHITECTURE
+P:	Arnd Bergmann
+M:	arnd@arndb.de
+L:	linuxppc64-dev@ozlabs.org
+W:	http://linuxppc64.org
+S:	Supported
+
 BTTV VIDEO4LINUX DRIVER
 P:	Gerd Knorr
 M:	kraxel@bytesex.org

arch/ppc64/Kconfig

@@ -77,6 +77,10 @@ config PPC_PSERIES
 	bool "  IBM pSeries & new iSeries"
 	default y
 
+config PPC_BPA
+	bool "  Broadband Processor Architecture"
+	depends on PPC_MULTIPLATFORM
+
 config PPC_PMAC
 	depends on PPC_MULTIPLATFORM
 	bool "  Apple G5 based machines"
@@ -106,6 +110,21 @@ config PPC_OF
 	bool
 	default y
 
+config XICS
+	depends on PPC_PSERIES
+	bool
+	default y
+
+config MPIC
+	depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE
+	bool
+	default y
+
+config BPA_IIC
+	depends on PPC_BPA
+	bool
+	default y
+
 # VMX is pSeries only for now until somebody writes the iSeries
 # exception vectors for it
 config ALTIVEC
@@ -292,7 +311,7 @@ config MSCHUNKS
 
 config PPC_RTAS
 	bool
-	depends on PPC_PSERIES
+	depends on PPC_PSERIES || PPC_BPA
 	default y
 
 config RTAS_PROC

arch/ppc64/Makefile

@@ -90,12 +90,14 @@ boot := arch/ppc64/boot
 boottarget-$(CONFIG_PPC_PSERIES) := zImage zImage.initrd
 boottarget-$(CONFIG_PPC_MAPLE) := zImage zImage.initrd
 boottarget-$(CONFIG_PPC_ISERIES) := vmlinux.sminitrd vmlinux.initrd vmlinux.sm
+boottarget-$(CONFIG_PPC_BPA) := zImage zImage.initrd
 $(boottarget-y): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage
 bootimage-$(CONFIG_PPC_PMAC) := vmlinux
 bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage
+bootimage-$(CONFIG_PPC_BPA) := zImage
 bootimage-$(CONFIG_PPC_ISERIES) := vmlinux
 BOOTIMAGE := $(bootimage-y)
 install: vmlinux

arch/ppc64/kernel/Makefile

@@ -27,17 +27,21 @@ obj-$(CONFIG_PPC_ISERIES) += HvCall.o HvLpConfig.o LparData.o \
 			     mf.o HvLpEvent.o iSeries_proc.o iSeries_htab.o \
 			     iSeries_iommu.o
 
-obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o mpic.o
+obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o prom.o
 
 obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \
 			     pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \
-			     xics.o rtas.o pSeries_setup.o pSeries_iommu.o
+			     pSeries_setup.o pSeries_iommu.o
+
+obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \
+			 bpa_iic.o spider-pic.o
 
 obj-$(CONFIG_EEH)		+= eeh.o
 obj-$(CONFIG_PROC_FS)		+= proc_ppc64.o
 obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
+obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas_pci.o
 obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
 obj-$(CONFIG_SCANLOG)		+= scanlog.o
 obj-$(CONFIG_VIOPATH)		+= viopath.o
@@ -46,6 +50,8 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_IBMVIO)		+= vio.o
+obj-$(CONFIG_XICS)		+= xics.o
+obj-$(CONFIG_MPIC)		+= mpic.o
 
 obj-$(CONFIG_PPC_PMAC)		+= pmac_setup.o pmac_feature.o pmac_pci.o \
 				   pmac_time.o pmac_nvram.o pmac_low_i2c.o
@@ -58,6 +64,7 @@ ifdef CONFIG_SMP
 obj-$(CONFIG_PPC_PMAC)		+= pmac_smp.o smp-tbsync.o
 obj-$(CONFIG_PPC_ISERIES)	+= iSeries_smp.o
 obj-$(CONFIG_PPC_PSERIES)	+= pSeries_smp.o
+obj-$(CONFIG_PPC_BPA)		+= pSeries_smp.o
 obj-$(CONFIG_PPC_MAPLE)		+= smp-tbsync.o
 endif
 

arch/ppc64/kernel/bpa_iic.c

+/*
+ * BPA Internal Interrupt Controller
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/ptrace.h>
+
+#include "bpa_iic.h"
+
+struct iic_pending_bits {
+	u32 data;
+	u8 flags;
+	u8 class;
+	u8 source;
+	u8 prio;
+};
+
+enum iic_pending_flags {
+	IIC_VALID = 0x80,
+	IIC_IPI   = 0x40,
+};
+
+struct iic_regs {
+	struct iic_pending_bits pending;
+	struct iic_pending_bits pending_destr;
+	u64 generate;
+	u64 prio;
+};
+
+struct iic {
+	struct iic_regs __iomem *regs;
+};
+
+static DEFINE_PER_CPU(struct iic, iic);
+
+void iic_local_enable(void)
+{
+	out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
+}
+
+void iic_local_disable(void)
+{
+	out_be64(&__get_cpu_var(iic).regs->prio, 0x0);
+}
+
+static unsigned int iic_startup(unsigned int irq)
+{
+	return 0;
+}
+
+static void iic_enable(unsigned int irq)
+{
+	iic_local_enable();
+}
+
+static void iic_disable(unsigned int irq)
+{
+}
+
+static void iic_end(unsigned int irq)
+{
+	iic_local_enable();
+}
+
+static struct hw_interrupt_type iic_pic = {
+	.typename = " BPA-IIC  ",
+	.startup = iic_startup,
+	.enable = iic_enable,
+	.disable = iic_disable,
+	.end = iic_end,
+};
+
+static int iic_external_get_irq(struct iic_pending_bits pending)
+{
+	int irq;
+	unsigned char node, unit;
+
+	node = pending.source >> 4;
+	unit = pending.source & 0xf;
+	irq = -1;
+
+	/*
+	 * This mapping is specific to the Broadband
+	 * Engine. We might need to get the numbers
+	 * from the device tree to support future CPUs.
+	 */
+	switch (unit) {
+	case 0x00:
+	case 0x0b:
+		/*
+		 * One of these units can be connected
+		 * to an external interrupt controller.
+		 */
+		if (pending.prio > 0x3f ||
+		    pending.class != 2)
+			break;
+		irq = IIC_EXT_OFFSET
+			+ spider_get_irq(pending.prio + node * IIC_NODE_STRIDE)
+			+ node * IIC_NODE_STRIDE;
+		break;
+	case 0x01 ... 0x04:
+	case 0x07 ... 0x0a:
+		/*
+		 * These units are connected to the SPEs
+		 */
+		if (pending.class > 2)
+			break;
+		irq = IIC_SPE_OFFSET
+			+ pending.class * IIC_CLASS_STRIDE
+			+ node * IIC_NODE_STRIDE
+			+ unit;
+		break;
+	}
+	if (irq == -1)
+		printk(KERN_WARNING "Unexpected interrupt class %02x, "
+			"source %02x, prio %02x, cpu %02x\n", pending.class,
+			pending.source, pending.prio, smp_processor_id());
+	return irq;
+}
+
+/* Get an IRQ number from the pending state register of the IIC */
+int iic_get_irq(struct pt_regs *regs)
+{
+	struct iic *iic;
+	int irq;
+	struct iic_pending_bits pending;
+
+	iic = &__get_cpu_var(iic);
+	*(unsigned long *) &pending = 
+		in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
+
+	irq = -1;
+	if (pending.flags & IIC_VALID) {
+		if (pending.flags & IIC_IPI) {
+			irq = IIC_IPI_OFFSET + (pending.prio >> 4);
+/*
+			if (irq > 0x80)
+				printk(KERN_WARNING "Unexpected IPI prio %02x"
+					"on CPU %02x\n", pending.prio,
+							smp_processor_id());
+*/
+		} else {
+			irq = iic_external_get_irq(pending);
+		}
+	}
+	return irq;
+}
+
+static struct iic_regs __iomem *find_iic(int cpu)
+{
+	struct device_node *np;
+	int nodeid = cpu / 2;
+	unsigned long regs;
+	struct iic_regs __iomem *iic_regs;
+
+	for (np = of_find_node_by_type(NULL, "cpu");
+	     np;
+	     np = of_find_node_by_type(np, "cpu")) {
+		if (nodeid == *(int *)get_property(np, "node-id", NULL))
+			break;
+	}
+
+	if (!np) {
+		printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
+		iic_regs = NULL;
+	} else {
+		regs = *(long *)get_property(np, "iic", NULL);
+
+		/* hack until we have decided on the devtree info */
+		regs += 0x400;
+		if (cpu & 1)
+			regs += 0x20;
+
+		printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs);
+		iic_regs = __ioremap(regs, sizeof(struct iic_regs),
+						 _PAGE_NO_CACHE);
+	}
+	return iic_regs;
+}
+
+#ifdef CONFIG_SMP
+void iic_setup_cpu(void)
+{
+	out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
+}
+
+void iic_cause_IPI(int cpu, int mesg)
+{
+	out_be64(&per_cpu(iic, cpu).regs->generate, mesg);
+}
+
+static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
+{
+
+	smp_message_recv(irq - IIC_IPI_OFFSET, regs);
+	return IRQ_HANDLED;
+}
+
+static void iic_request_ipi(int irq, const char *name)
+{
+	/* IPIs are marked SA_INTERRUPT as they must run with irqs
+	 * disabled */
+	get_irq_desc(irq)->handler = &iic_pic;
+	get_irq_desc(irq)->status |= IRQ_PER_CPU;
+	request_irq(irq, iic_ipi_action, SA_INTERRUPT, name, NULL);
+}
+
+void iic_request_IPIs(void)
+{
+	iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_CALL_FUNCTION, "IPI-call");
+	iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_RESCHEDULE, "IPI-resched");
+#ifdef CONFIG_DEBUGGER
+	iic_request_ipi(IIC_IPI_OFFSET + PPC_MSG_DEBUGGER_BREAK, "IPI-debug");
+#endif /* CONFIG_DEBUGGER */
+}
+#endif /* CONFIG_SMP */
+
+static void iic_setup_spe_handlers(void)
+{
+	int be, isrc;
+
+	/* Assume two threads per BE are present */
+	for (be=0; be < num_present_cpus() / 2; be++) {
+		for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) {
+			int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc;
+			get_irq_desc(irq)->handler = &iic_pic;
+		}
+	}
+}
+
+void iic_init_IRQ(void)
+{
+	int cpu, irq_offset;
+	struct iic *iic;
+
+	irq_offset = 0;
+	for_each_cpu(cpu) {
+		iic = &per_cpu(iic, cpu);
+		iic->regs = find_iic(cpu);
+		if (iic->regs)
+			out_be64(&iic->regs->prio, 0xff);
+	}
+	iic_setup_spe_handlers();
+}

arch/ppc64/kernel/bpa_iic.h

+#ifndef ASM_BPA_IIC_H
+#define ASM_BPA_IIC_H
+#ifdef __KERNEL__
+/*
+ * Mapping of IIC pending bits into per-node
+ * interrupt numbers.
+ *
+ * IRQ     FF CC SS PP   FF CC SS PP	Description
+ *
+ * 00-3f   80 02 +0 00 - 80 02 +0 3f	South Bridge
+ * 00-3f   80 02 +b 00 - 80 02 +b 3f	South Bridge
+ * 41-4a   80 00 +1 ** - 80 00 +a **	SPU Class 0
+ * 51-5a   80 01 +1 ** - 80 01 +a **	SPU Class 1
+ * 61-6a   80 02 +1 ** - 80 02 +a **	SPU Class 2
+ * 70-7f   C0 ** ** 00 - C0 ** ** 0f	IPI
+ *
+ *    F flags
+ *    C class
+ *    S source
+ *    P Priority
+ *    + node number
+ *    * don't care
+ *
+ * A node consists of a Broadband Engine and an optional
+ * south bridge device providing a maximum of 64 IRQs.
+ * The south bridge may be connected to either IOIF0
+ * or IOIF1.
+ * Each SPE is represented as three IRQ lines, one per
+ * interrupt class.
+ * 16 IRQ numbers are reserved for inter processor
+ * interruptions, although these are only used in the
+ * range of the first node.
+ *
+ * This scheme needs 128 IRQ numbers per BIF node ID,
+ * which means that with the total of 512 lines
+ * available, we can have a maximum of four nodes.
+ */
+
+enum {
+	IIC_EXT_OFFSET   = 0x00, /* Start of south bridge IRQs */
+	IIC_NUM_EXT      = 0x40, /* Number of south bridge IRQs */
+	IIC_SPE_OFFSET   = 0x40, /* Start of SPE interrupts */
+	IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class    */
+	IIC_IPI_OFFSET   = 0x70, /* Start of IPI IRQs */
+	IIC_NUM_IPIS     = 0x10, /* IRQs reserved for IPI */
+	IIC_NODE_STRIDE  = 0x80, /* Total IRQs per node   */
+};
+
+extern void iic_init_IRQ(void);
+extern int  iic_get_irq(struct pt_regs *regs);
+extern void iic_cause_IPI(int cpu, int mesg);
+extern void iic_request_IPIs(void);
+extern void iic_setup_cpu(void);
+extern void iic_local_enable(void);
+extern void iic_local_disable(void);
+
+
+extern void spider_init_IRQ(void);
+extern int spider_get_irq(unsigned long int_pending);
+
+#endif
+#endif /* ASM_BPA_IIC_H */

arch/ppc64/kernel/bpa_iommu.h

+#ifndef BPA_IOMMU_H
+#define BPA_IOMMU_H
+
+/* some constants */
+enum {
+	/* segment table entries */
+	IOST_VALID_MASK	  = 0x8000000000000000ul,
+	IOST_TAG_MASK     = 0x3000000000000000ul,
+	IOST_PT_BASE_MASK = 0x000003fffffff000ul,
+	IOST_NNPT_MASK	  = 0x0000000000000fe0ul,
+	IOST_PS_MASK	  = 0x000000000000000ful,
+
+	IOST_PS_4K	  = 0x1,
+	IOST_PS_64K	  = 0x3,
+	IOST_PS_1M	  = 0x5,
+	IOST_PS_16M	  = 0x7,
+
+	/* iopt tag register */
+	IOPT_VALID_MASK   = 0x0000000200000000ul,
+	IOPT_TAG_MASK	  = 0x00000001fffffffful,
+
+	/* iopt cache register */
+	IOPT_PROT_MASK	  = 0xc000000000000000ul,
+	IOPT_PROT_NONE	  = 0x0000000000000000ul,
+	IOPT_PROT_READ	  = 0x4000000000000000ul,
+	IOPT_PROT_WRITE	  = 0x8000000000000000ul,
+	IOPT_PROT_RW	  = 0xc000000000000000ul,
+	IOPT_COHERENT	  = 0x2000000000000000ul,
+	
+	IOPT_ORDER_MASK	  = 0x1800000000000000ul,
+	/* order access to same IOID/VC on same address */
+	IOPT_ORDER_ADDR	  = 0x0800000000000000ul,
+	/* similar, but only after a write access */
+	IOPT_ORDER_WRITES = 0x1000000000000000ul,
+	/* Order all accesses to same IOID/VC */
+	IOPT_ORDER_VC	  = 0x1800000000000000ul,
+	
+	IOPT_RPN_MASK	  = 0x000003fffffff000ul,
+	IOPT_HINT_MASK	  = 0x0000000000000800ul,
+	IOPT_IOID_MASK	  = 0x00000000000007fful,
+
+	IOSTO_ENABLE	  = 0x8000000000000000ul,
+	IOSTO_ORIGIN	  = 0x000003fffffff000ul,
+	IOSTO_HW	  = 0x0000000000000800ul,
+	IOSTO_SW	  = 0x0000000000000400ul,
+
+	IOCMD_CONF_TE	  = 0x0000800000000000ul,
+
+	/* memory mapped registers */
+	IOC_PT_CACHE_DIR  = 0x000,
+	IOC_ST_CACHE_DIR  = 0x800,
+	IOC_PT_CACHE_REG  = 0x910,
+	IOC_ST_ORIGIN     = 0x918,
+	IOC_CONF	  = 0x930,
+
+	/* The high bit needs to be set on every DMA address,
+	   only 2GB are addressable */
+	BPA_DMA_VALID	  = 0x80000000,
+	BPA_DMA_MASK	  = 0x7fffffff,
+};
+
+
+void bpa_init_iommu(void);
+
+#endif

arch/ppc64/kernel/bpa_nvram.c

+/*
+ * NVRAM for CPBW
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/machdep.h>
+#include <asm/nvram.h>
+#include <asm/prom.h>
+
+static void __iomem *bpa_nvram_start;
+static long bpa_nvram_len;
+static spinlock_t bpa_nvram_lock = SPIN_LOCK_UNLOCKED;
+
+static ssize_t bpa_nvram_read(char *buf, size_t count, loff_t *index)
+{
+	unsigned long flags;
+
+	if (*index >= bpa_nvram_len)
+		return 0;
+	if (*index + count > bpa_nvram_len)
+		count = bpa_nvram_len - *index;
+
+	spin_lock_irqsave(&bpa_nvram_lock, flags);
+
+	memcpy_fromio(buf, bpa_nvram_start + *index, count);
+
+	spin_unlock_irqrestore(&bpa_nvram_lock, flags);
+	
+	*index += count;
+	return count;
+}
+
+static ssize_t bpa_nvram_write(char *buf, size_t count, loff_t *index)
+{
+	unsigned long flags;
+
+	if (*index >= bpa_nvram_len)
+		return 0;
+	if (*index + count > bpa_nvram_len)
+		count = bpa_nvram_len - *index;
+
+	spin_lock_irqsave(&bpa_nvram_lock, flags);
+
+	memcpy_toio(bpa_nvram_start + *index, buf, count);
+
+	spin_unlock_irqrestore(&bpa_nvram_lock, flags);
+	
+	*index += count;
+	return count;
+}
+
+static ssize_t bpa_nvram_get_size(void)
+{
+	return bpa_nvram_len;
+}
+
+int __init bpa_nvram_init(void)
+{
+	struct device_node *nvram_node;
+	unsigned long *buffer;
+	int proplen;
+	unsigned long nvram_addr;
+	int ret;
+
+	ret = -ENODEV;
+	nvram_node = of_find_node_by_type(NULL, "nvram");
+	if (!nvram_node)
+		goto out;
+
+	ret = -EIO;
+	buffer = (unsigned long *)get_property(nvram_node, "reg", &proplen);
+	if (proplen != 2*sizeof(unsigned long))
+		goto out;
+
+	ret = -ENODEV;
+	nvram_addr = buffer[0];
+	bpa_nvram_len = buffer[1];
+	if ( (!bpa_nvram_len) || (!nvram_addr) )
+		goto out;
+
+	bpa_nvram_start = ioremap(nvram_addr, bpa_nvram_len);
+	if (!bpa_nvram_start)
+		goto out;
+
+	printk(KERN_INFO "BPA NVRAM, %luk mapped to %p\n",
+	       bpa_nvram_len >> 10, bpa_nvram_start);
+
+	ppc_md.nvram_read	= bpa_nvram_read;
+	ppc_md.nvram_write	= bpa_nvram_write;
+	ppc_md.nvram_size	= bpa_nvram_get_size;
+
+out:
+	of_node_put(nvram_node);
+	return ret;
+}

arch/ppc64/kernel/bpa_setup.c

+/*
+ *  linux/arch/ppc/kernel/bpa_setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ *  Modified by PPC64 Team, IBM Corp
+ *  Modified by BPA Team, IBM Deutschland Entwicklung GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/console.h>
+
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/pci-bridge.h>
+#include <asm/iommu.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/nvram.h>
+#include <asm/cputable.h>
+
+#include "pci.h"
+#include "bpa_iic.h"
+#include "bpa_iommu.h"
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+void bpa_get_cpuinfo(struct seq_file *m)
+{
+	struct device_node *root;
+	const char *model = "";
+
+	root = of_find_node_by_path("/");
+	if (root)
+		model = get_property(root, "model", NULL);
+	seq_printf(m, "machine\t\t: BPA %s\n", model);
+	of_node_put(root);
+}
+
+static void bpa_progress(char *s, unsigned short hex)
+{
+	printk("*** %04x : %s\n", hex, s ? s : "");
+}
+
+static void __init bpa_setup_arch(void)
+{
+	ppc_md.init_IRQ       = iic_init_IRQ;
+	ppc_md.get_irq        = iic_get_irq;
+
+#ifdef CONFIG_SMP
+	smp_init_pSeries();
+#endif
+
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	if (ROOT_DEV == 0) {
+		printk("No ramdisk, default root is /dev/hda2\n");
+		ROOT_DEV = Root_HDA2;
+	}
+
+	/* Find and initialize PCI host bridges */
+	init_pci_config_tokens();
+	find_and_init_phbs();
+	spider_init_IRQ();
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+
+	bpa_nvram_init();
+}
+
+/*
+ * Early initialization.  Relocation is on but do not reference unbolted pages
+ */
+static void __init bpa_init_early(void)
+{
+	DBG(" -> bpa_init_early()\n");
+
+	hpte_init_native();
+
+	bpa_init_iommu();
+
+	ppc64_interrupt_controller = IC_BPA_IIC;
+
+	DBG(" <- bpa_init_early()\n");
+}
+
+
+static int __init bpa_probe(int platform)
+{
+	if (platform != PLATFORM_BPA)
+		return 0;
+
+	return 1;
+}
+
+struct machdep_calls __initdata bpa_md = {
+	.probe			= bpa_probe,
+	.setup_arch		= bpa_setup_arch,
+	.init_early		= bpa_init_early,
+	.get_cpuinfo		= bpa_get_cpuinfo,
+	.restart		= rtas_restart,
+	.power_off		= rtas_power_off,
+	.halt			= rtas_halt,
+	.get_boot_time		= rtas_get_boot_time,
+	.get_rtc_time		= rtas_get_rtc_time,
+	.set_rtc_time		= rtas_set_rtc_time,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= bpa_progress,
+};

arch/ppc64/kernel/cpu_setup_power4.S

@@ -73,7 +73,21 @@ _GLOBAL(__970_cpu_preinit)
 
 _GLOBAL(__setup_cpu_power4)
 	blr
-	
+
+_GLOBAL(__setup_cpu_be)
+        /* Set large page sizes LP=0: 16MB, LP=1: 64KB */
+        addi    r3, 0,  0
+        ori     r3, r3, HID6_LB
+        sldi    r3, r3, 32
+        nor     r3, r3, r3
+        mfspr   r4, SPRN_HID6
+        and     r4, r4, r3
+        addi    r3, 0, 0x02000
+        sldi    r3, r3, 32
+        or      r4, r4, r3
+        mtspr   SPRN_HID6, r4
+	blr
+
 _GLOBAL(__setup_cpu_ppc970)
 	mfspr	r0,SPRN_HID0
 	li	r11,5			/* clear DOZE and SLEEP */

arch/ppc64/kernel/cputable.c

@@ -34,6 +34,7 @@ EXPORT_SYMBOL(cur_cpu_spec);
 extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec);
 
 
 /* We only set the altivec features if the kernel was compiled with altivec
@@ -162,6 +163,16 @@ struct cpu_spec	cpu_specs[] = {
 	    __setup_cpu_power4,
 	    COMMON_PPC64_FW
     },
+    {	/* BE DD1.x  */
+	    0xffff0000, 0x00700000, "Broadband Engine",
+	    CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |
+		    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP |
+		    CPU_FTR_SMT,
+	    COMMON_USER_PPC64 | PPC_FEATURE_HAS_ALTIVEC_COMP,
+	    128, 128,
+	    __setup_cpu_be,
+	    COMMON_PPC64_FW
+    },
     {	/* default match */
 	    0x00000000, 0x00000000, "POWER4 (compatible)",
   	    CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE |

arch/ppc64/kernel/iSeries_setup.c

@@ -671,9 +671,6 @@ static void __init iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr)
 	}
 }
 
-extern unsigned long ppc_proc_freq;
-extern unsigned long ppc_tb_freq;
-
 /*
  * Document me.
  */
@@ -772,8 +769,6 @@ static void iSeries_halt(void)
 	mf_power_off();
 }
 
-extern void setup_default_decr(void);
-
 /*
  * void __init iSeries_calibrate_decr()
  *

arch/ppc64/kernel/irq.c

@@ -395,6 +395,9 @@ int virt_irq_create_mapping(unsigned int real_irq)
 	if (ppc64_interrupt_controller == IC_OPEN_PIC)
 		return real_irq;	/* no mapping for openpic (for now) */
 
+	if (ppc64_interrupt_controller == IC_BPA_IIC)
+		return real_irq;	/* no mapping for iic either */
+
 	/* don't map interrupts < MIN_VIRT_IRQ */
 	if (real_irq < MIN_VIRT_IRQ) {
 		virt_irq_to_real_map[real_irq] = real_irq;

arch/ppc64/kernel/maple_setup.c

@@ -78,17 +78,77 @@ extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel);
 extern void generic_find_legacy_serial_ports(u64 *physport,
 		unsigned int *default_speed);
 
-
 static void maple_restart(char *cmd)
 {
+	unsigned int maple_nvram_base;
+	unsigned int maple_nvram_offset;
+	unsigned int maple_nvram_command;
+	struct device_node *rtcs;
+
+	/* find NVRAM device */
+	rtcs = find_compatible_devices("nvram", "AMD8111");
+	if (rtcs && rtcs->addrs) {
+		maple_nvram_base = rtcs->addrs[0].address;
+	} else {
+		printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
+		printk(KERN_EMERG "Maple: Manual Restart Required\n");
+		return;
+	}
+
+	/* find service processor device */
+	rtcs = find_devices("service-processor");
+	if (!rtcs) {
+		printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+		printk(KERN_EMERG "Maple: Manual Restart Required\n");
+		return;
+	}
+	maple_nvram_offset = *(unsigned int*) get_property(rtcs,
+			"restart-addr", NULL);
+	maple_nvram_command = *(unsigned int*) get_property(rtcs,
+			"restart-value", NULL);
+
+	/* send command */
+	outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
+	for (;;) ;
 }
 
 static void maple_power_off(void)
 {
+	unsigned int maple_nvram_base;
+	unsigned int maple_nvram_offset;
+	unsigned int maple_nvram_command;
+	struct device_node *rtcs;
+
+	/* find NVRAM device */
+	rtcs = find_compatible_devices("nvram", "AMD8111");
+	if (rtcs && rtcs->addrs) {
+		maple_nvram_base = rtcs->addrs[0].address;
+	} else {
+		printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
+		printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
+		return;
+	}
+
+	/* find service processor device */
+	rtcs = find_devices("service-processor");
+	if (!rtcs) {
+		printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+		printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
+		return;
+	}
+	maple_nvram_offset = *(unsigned int*) get_property(rtcs,
+			"power-off-addr", NULL);
+	maple_nvram_command = *(unsigned int*) get_property(rtcs,
+			"power-off-value", NULL);
+
+	/* send command */
+	outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
+	for (;;) ;
 }
 
 static void maple_halt(void)
 {
+	maple_power_off();
 }
 
 #ifdef CONFIG_SMP
@@ -235,6 +295,6 @@ struct machdep_calls __initdata maple_md = {
        	.get_boot_time		= maple_get_boot_time,
        	.set_rtc_time		= maple_set_rtc_time,
        	.get_rtc_time		= maple_get_rtc_time,
-      	.calibrate_decr		= maple_calibrate_decr,
+      	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= maple_progress,
 };

arch/ppc64/kernel/maple_time.c

@@ -42,11 +42,8 @@
 #define DBG(x...)
 #endif
 
-extern void setup_default_decr(void);
 extern void GregorianDay(struct rtc_time * tm);
 
-extern unsigned long ppc_tb_freq;
-extern unsigned long ppc_proc_freq;
 static int maple_rtc_addr;
 
 static int maple_clock_read(int addr)
@@ -176,51 +173,3 @@ void __init maple_get_boot_time(struct rtc_time *tm)
 	maple_get_rtc_time(tm);
 }
 
-/* XXX FIXME: Some sane defaults: 125 MHz timebase, 1GHz processor */
-#define DEFAULT_TB_FREQ		125000000UL
-#define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
-
-void __init maple_calibrate_decr(void)
-{
-	struct device_node *cpu;
-	struct div_result divres;
-	unsigned int *fp = NULL;
-
-	/*
-	 * The cpu node should have a timebase-frequency property
-	 * to tell us the rate at which the decrementer counts.
-	 */
-	cpu = of_find_node_by_type(NULL, "cpu");
-
-	ppc_tb_freq = DEFAULT_TB_FREQ;
-	if (cpu != 0)
-		fp = (unsigned int *)get_property(cpu, "timebase-frequency", NULL);
-	if (fp != NULL)
-		ppc_tb_freq = *fp;
-	else
-		printk(KERN_ERR "WARNING: Estimating decrementer frequency (not found)\n");
-	fp = NULL;
-	ppc_proc_freq = DEFAULT_PROC_FREQ;
-	if (cpu != 0)
-		fp = (unsigned int *)get_property(cpu, "clock-frequency", NULL);
-	if (fp != NULL)
-		ppc_proc_freq = *fp;
-	else
-		printk(KERN_ERR "WARNING: Estimating processor frequency (not found)\n");
-
-	of_node_put(cpu);
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       ppc_tb_freq/1000000, ppc_tb_freq%1000000);
-	printk(KERN_INFO "time_init: processor frequency   = %lu.%.6lu MHz\n",
-	       ppc_proc_freq/1000000, ppc_proc_freq%1000000);
-
-	tb_ticks_per_jiffy = ppc_tb_freq / HZ;
-	tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
-	tb_ticks_per_usec = ppc_tb_freq / 1000000;
-	tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
-	div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres);
-	tb_to_xs = divres.result_low;
-
-	setup_default_decr();
-}

arch/ppc64/kernel/mpic.h

@@ -265,3 +265,6 @@ extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
 extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
 /* This one gets to the primary mpic */
 extern int mpic_get_irq(struct pt_regs *regs);
+
+/* global mpic for pSeries */
+extern struct mpic *pSeries_mpic;

arch/ppc64/kernel/pSeries_setup.c

@@ -71,11 +71,6 @@
 #define DBG(fmt...)
 #endif
 
-extern void pSeries_final_fixup(void);
-
-extern void pSeries_get_boot_time(struct rtc_time *rtc_time);
-extern void pSeries_get_rtc_time(struct rtc_time *rtc_time);
-extern int  pSeries_set_rtc_time(struct rtc_time *rtc_time);
 extern void find_udbg_vterm(void);
 extern void system_reset_fwnmi(void);	/* from head.S */
 extern void machine_check_fwnmi(void);	/* from head.S */
@@ -84,9 +79,6 @@ extern void generic_find_legacy_serial_ports(u64 *physport,
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 
-extern unsigned long ppc_proc_freq;
-extern unsigned long ppc_tb_freq;
-
 extern void pSeries_system_reset_exception(struct pt_regs *regs);
 extern int pSeries_machine_check_exception(struct pt_regs *regs);
 
@@ -381,171 +373,6 @@ static void __init pSeries_init_early(void)
 }
 
 
-static void pSeries_progress(char *s, unsigned short hex)
-{
-	struct device_node *root;
-	int width, *p;
-	char *os;
-	static int display_character, set_indicator;
-	static int max_width;
-	static DEFINE_SPINLOCK(progress_lock);
-	static int pending_newline = 0;  /* did last write end with unprinted newline? */
-
-	if (!rtas.base)
-		return;
-
-	if (max_width == 0) {
-		if ((root = find_path_device("/rtas")) &&
-		     (p = (unsigned int *)get_property(root,
-						       "ibm,display-line-length",
-						       NULL)))
-			max_width = *p;
-		else
-			max_width = 0x10;
-		display_character = rtas_token("display-character");
-		set_indicator = rtas_token("set-indicator");
-	}
-
-	if (display_character == RTAS_UNKNOWN_SERVICE) {
-		/* use hex display if available */
-		if (set_indicator != RTAS_UNKNOWN_SERVICE)
-			rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex);
-		return;
-	}
-
-	spin_lock(&progress_lock);
-
-	/*
-	 * Last write ended with newline, but we didn't print it since
-	 * it would just clear the bottom line of output. Print it now
-	 * instead.
-	 *
-	 * If no newline is pending, print a CR to start output at the
-	 * beginning of the line.
-	 */
-	if (pending_newline) {
-		rtas_call(display_character, 1, 1, NULL, '\r');
-		rtas_call(display_character, 1, 1, NULL, '\n');
-		pending_newline = 0;
-	} else {
-		rtas_call(display_character, 1, 1, NULL, '\r');
-	}
- 
-	width = max_width;
-	os = s;
-	while (*os) {
-		if (*os == '\n' || *os == '\r') {
-			/* Blank to end of line. */
-			while (width-- > 0)
-				rtas_call(display_character, 1, 1, NULL, ' ');
- 
-			/* If newline is the last character, save it
-			 * until next call to avoid bumping up the
-			 * display output.
-			 */
-			if (*os == '\n' && !os[1]) {
-				pending_newline = 1;
-				spin_unlock(&progress_lock);
-				return;
-			}
- 
-			/* RTAS wants CR-LF, not just LF */
- 
-			if (*os == '\n') {
-				rtas_call(display_character, 1, 1, NULL, '\r');
-				rtas_call(display_character, 1, 1, NULL, '\n');
-			} else {
-				/* CR might be used to re-draw a line, so we'll
-				 * leave it alone and not add LF.
-				 */
-				rtas_call(display_character, 1, 1, NULL, *os);
-			}
- 
-			width = max_width;
-		} else {
-			width--;
-			rtas_call(display_character, 1, 1, NULL, *os);
-		}
- 
-		os++;
- 
-		/* if we overwrite the screen length */
-		if (width <= 0)
-			while ((*os != 0) && (*os != '\n') && (*os != '\r'))
-				os++;
-	}
- 
-	/* Blank to end of line. */
-	while (width-- > 0)
-		rtas_call(display_character, 1, 1, NULL, ' ');
-
-	spin_unlock(&progress_lock);
-}
-
-extern void setup_default_decr(void);
-
-/* Some sane defaults: 125 MHz timebase, 1GHz processor */
-#define DEFAULT_TB_FREQ		125000000UL
-#define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
-
-static void __init pSeries_calibrate_decr(void)
-{
-	struct device_node *cpu;
-	struct div_result divres;
-	unsigned int *fp;
-	int node_found;
-
-	/*
-	 * The cpu node should have a timebase-frequency property
-	 * to tell us the rate at which the decrementer counts.
-	 */
-	cpu = of_find_node_by_type(NULL, "cpu");
-
-	ppc_tb_freq = DEFAULT_TB_FREQ;		/* hardcoded default */
-	node_found = 0;
-	if (cpu != 0) {
-		fp = (unsigned int *)get_property(cpu, "timebase-frequency",
-						  NULL);
-		if (fp != 0) {
-			node_found = 1;
-			ppc_tb_freq = *fp;
-		}
-	}
-	if (!node_found)
-		printk(KERN_ERR "WARNING: Estimating decrementer frequency "
-				"(not found)\n");
-
-	ppc_proc_freq = DEFAULT_PROC_FREQ;
-	node_found = 0;
-	if (cpu != 0) {
-		fp = (unsigned int *)get_property(cpu, "clock-frequency",
-						  NULL);
-		if (fp != 0) {
-			node_found = 1;
-			ppc_proc_freq = *fp;
-		}
-	}
-	if (!node_found)
-		printk(KERN_ERR "WARNING: Estimating processor frequency "
-				"(not found)\n");
-
-	of_node_put(cpu);
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       ppc_tb_freq/1000000, ppc_tb_freq%1000000);
-	printk(KERN_INFO "time_init: processor frequency   = %lu.%.6lu MHz\n",
-	       ppc_proc_freq/1000000, ppc_proc_freq%1000000);
-
-	tb_ticks_per_jiffy = ppc_tb_freq / HZ;
-	tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
-	tb_ticks_per_usec = ppc_tb_freq / 1000000;
-	tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
-	div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres);
-	tb_to_xs = divres.result_low;
-
-	setup_default_decr();
-}
-
 static int pSeries_check_legacy_ioport(unsigned int baseport)
 {
 	struct device_node *np;
@@ -596,16 +423,17 @@ struct machdep_calls __initdata pSeries_md = {
 	.get_cpuinfo		= pSeries_get_cpuinfo,
 	.log_error		= pSeries_log_error,
 	.pcibios_fixup		= pSeries_final_fixup,
+	.irq_bus_setup		= pSeries_irq_bus_setup,
 	.restart		= rtas_restart,
 	.power_off		= rtas_power_off,
 	.halt			= rtas_halt,
 	.panic			= rtas_os_term,
 	.cpu_die		= pSeries_mach_cpu_die,
-	.get_boot_time		= pSeries_get_boot_time,
-	.get_rtc_time		= pSeries_get_rtc_time,
-	.set_rtc_time		= pSeries_set_rtc_time,
-	.calibrate_decr		= pSeries_calibrate_decr,
-	.progress		= pSeries_progress,
+	.get_boot_time		= rtas_get_boot_time,
+	.get_rtc_time		= rtas_get_rtc_time,
+	.set_rtc_time		= rtas_set_rtc_time,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= rtas_progress,
 	.check_legacy_ioport	= pSeries_check_legacy_ioport,
 	.system_reset_exception = pSeries_system_reset_exception,
 	.machine_check_exception = pSeries_machine_check_exception,

arch/ppc64/kernel/pSeries_smp.c

 /*
- * SMP support for pSeries machines.
+ * SMP support for pSeries and BPA machines.
  *
  * Dave Engebretsen, Peter Bergner, and
  * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
@@ -47,6 +47,7 @@
 #include <asm/pSeries_reconfig.h>
 
 #include "mpic.h"
+#include "bpa_iic.h"
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -286,6 +287,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 	return 1;
 }
 
+#ifdef CONFIG_XICS
 static inline void smp_xics_do_message(int cpu, int msg)
 {
 	set_bit(msg, &xics_ipi_message[cpu].value);
@@ -327,6 +329,37 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 	cpu_clear(cpu, of_spin_map);
 
 }
+#endif /* CONFIG_XICS */
+#ifdef CONFIG_BPA_IIC
+static void smp_iic_message_pass(int target, int msg)
+{
+	unsigned int i;
+
+	if (target < NR_CPUS) {
+		iic_cause_IPI(target, msg);
+	} else {
+		for_each_online_cpu(i) {
+			if (target == MSG_ALL_BUT_SELF
+			    && i == smp_processor_id())
+				continue;
+			iic_cause_IPI(i, msg);
+		}
+	}
+}
+
+static int __init smp_iic_probe(void)
+{
+	iic_request_IPIs();
+
+	return cpus_weight(cpu_possible_map);
+}
+
+static void __devinit smp_iic_setup_cpu(int cpu)
+{
+	if (cpu != boot_cpuid)
+		iic_setup_cpu();
+}
+#endif /* CONFIG_BPA_IIC */
 
 static DEFINE_SPINLOCK(timebase_lock);
 static unsigned long timebase = 0;
@@ -381,14 +414,15 @@ static int smp_pSeries_cpu_bootable(unsigned int nr)
 
 	return 1;
 }
-
+#ifdef CONFIG_MPIC
 static struct smp_ops_t pSeries_mpic_smp_ops = {
 	.message_pass	= smp_mpic_message_pass,
 	.probe		= smp_mpic_probe,
 	.kick_cpu	= smp_pSeries_kick_cpu,
 	.setup_cpu	= smp_mpic_setup_cpu,
 };
-
+#endif
+#ifdef CONFIG_XICS
 static struct smp_ops_t pSeries_xics_smp_ops = {
 	.message_pass	= smp_xics_message_pass,
 	.probe		= smp_xics_probe,
@@ -396,6 +430,16 @@ static struct smp_ops_t pSeries_xics_smp_ops = {
 	.setup_cpu	= smp_xics_setup_cpu,
 	.cpu_bootable	= smp_pSeries_cpu_bootable,
 };
+#endif
+#ifdef CONFIG_BPA_IIC
+static struct smp_ops_t bpa_iic_smp_ops = {
+	.message_pass	= smp_iic_message_pass,
+	.probe		= smp_iic_probe,
+	.kick_cpu	= smp_pSeries_kick_cpu,
+	.setup_cpu	= smp_iic_setup_cpu,
+	.cpu_bootable	= smp_pSeries_cpu_bootable,
+};
+#endif
 
 /* This is called very early */
 void __init smp_init_pSeries(void)
@@ -404,10 +448,25 @@ void __init smp_init_pSeries(void)
 
 	DBG(" -> smp_init_pSeries()\n");
 
-	if (ppc64_interrupt_controller == IC_OPEN_PIC)
+	switch (ppc64_interrupt_controller) {
+#ifdef CONFIG_MPIC
+	case IC_OPEN_PIC:
 		smp_ops = &pSeries_mpic_smp_ops;
-	else
+		break;
+#endif
+#ifdef CONFIG_XICS
+	case IC_PPC_XIC:
 		smp_ops = &pSeries_xics_smp_ops;
+		break;
+#endif
+#ifdef CONFIG_BPA_IIC
+	case IC_BPA_IIC:
+		smp_ops = &bpa_iic_smp_ops;
+		break;
+#endif
+	default:
+		panic("Invalid interrupt controller");
+	}
 
 #ifdef CONFIG_HOTPLUG_CPU
 	smp_ops->cpu_disable = pSeries_cpu_disable;

arch/ppc64/kernel/pci.c

@@ -902,6 +902,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 	list_for_each_entry(dev, &bus->devices, bus_list)
 		ppc_md.iommu_dev_setup(dev);
 
+	if (ppc_md.irq_bus_setup)
+		ppc_md.irq_bus_setup(bus);
+
 	if (!pci_probe_only)
 		return;
 

arch/ppc64/kernel/pci.h

@@ -40,10 +40,14 @@ struct device_node *fetch_dev_dn(struct pci_dev *dev);
 void pci_addr_cache_insert_device(struct pci_dev *dev);
 void pci_addr_cache_remove_device(struct pci_dev *dev);
 
-/* From pSeries_pci.h */
+/* From rtas_pci.h */
 void init_pci_config_tokens (void);
 unsigned long get_phb_buid (struct device_node *);
 
+/* From pSeries_pci.h */
+extern void pSeries_final_fixup(void);
+extern void pSeries_irq_bus_setup(struct pci_bus *bus);
+
 extern unsigned long pci_probe_only;
 extern unsigned long pci_assign_all_buses;
 extern int pci_read_irq_line(struct pci_dev *pci_dev);

arch/ppc64/kernel/pmac_time.c

@@ -40,11 +40,6 @@
 #define DBG(x...)
 #endif
 
-extern void setup_default_decr(void);
-
-extern unsigned long ppc_tb_freq;
-extern unsigned long ppc_proc_freq;
-
 /* Apparently the RTC stores seconds since 1 Jan 1904 */
 #define RTC_OFFSET	2082844800
 
@@ -161,8 +156,7 @@ void __init pmac_get_boot_time(struct rtc_time *tm)
 
 /*
  * Query the OF and get the decr frequency.
- * This was taken from the pmac time_init() when merging the prep/pmac
- * time functions.
+ * FIXME: merge this with generic_calibrate_decr
  */
 void __init pmac_calibrate_decr(void)
 {

arch/ppc64/kernel/proc_ppc64.c

@@ -53,7 +53,7 @@ static int __init proc_ppc64_create(void)
 	if (!root)
 		return 1;
 
-	if (!(systemcfg->platform & PLATFORM_PSERIES))
+	if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA)))
 		return 0;
 
 	if (!proc_mkdir("rtas", root))

arch/ppc64/kernel/prom_init.c

@@ -1915,9 +1915,9 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 		prom_send_capabilities();
 
 	/*
-	 * On pSeries, copy the CPU hold code
+	 * On pSeries and BPA, copy the CPU hold code
 	 */
-       	if (RELOC(of_platform) & PLATFORM_PSERIES)
+       	if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA))
        		copy_and_flush(0, KERNELBASE - offset, 0x100, 0);
 
 	/*

arch/ppc64/kernel/rtas-proc.c

@@ -371,11 +371,11 @@ static ssize_t ppc_rtas_progress_write(struct file *file,
 	/* Lets see if the user passed hexdigits */
 	hex = simple_strtoul(progress_led, NULL, 10);
 
-	ppc_md.progress ((char *)progress_led, hex);
+	rtas_progress ((char *)progress_led, hex);
 	return count;
 
 	/* clear the line */
-	/* ppc_md.progress("                   ", 0xffff);*/
+	/* rtas_progress("                   ", 0xffff);*/
 }
 /* ****************************************************************** */
 static int ppc_rtas_progress_show(struct seq_file *m, void *v)

arch/ppc64/kernel/rtas.c

@@ -91,6 +91,123 @@ call_rtas_display_status_delay(unsigned char c)
 	}
 }
 
+void
+rtas_progress(char *s, unsigned short hex)
+{
+	struct device_node *root;
+	int width, *p;
+	char *os;
+	static int display_character, set_indicator;
+	static int display_width, display_lines, *row_width, form_feed;
+	static DEFINE_SPINLOCK(progress_lock);
+	static int current_line;
+	static int pending_newline = 0;  /* did last write end with unprinted newline? */
+
+	if (!rtas.base)
+		return;
+
+	if (display_width == 0) {
+		display_width = 0x10;
+		if ((root = find_path_device("/rtas"))) {
+			if ((p = (unsigned int *)get_property(root,
+					"ibm,display-line-length", NULL)))
+				display_width = *p;
+			if ((p = (unsigned int *)get_property(root,
+					"ibm,form-feed", NULL)))
+				form_feed = *p;
+			if ((p = (unsigned int *)get_property(root,
+					"ibm,display-number-of-lines", NULL)))
+				display_lines = *p;
+			row_width = (unsigned int *)get_property(root,
+					"ibm,display-truncation-length", NULL);
+		}
+		display_character = rtas_token("display-character");
+		set_indicator = rtas_token("set-indicator");
+	}
+
+	if (display_character == RTAS_UNKNOWN_SERVICE) {
+		/* use hex display if available */
+		if (set_indicator != RTAS_UNKNOWN_SERVICE)
+			rtas_call(set_indicator, 3, 1, NULL, 6, 0, hex);
+		return;
+	}
+
+	spin_lock(&progress_lock);
+
+	/*
+	 * Last write ended with newline, but we didn't print it since
+	 * it would just clear the bottom line of output. Print it now
+	 * instead.
+	 *
+	 * If no newline is pending and form feed is supported, clear the
+	 * display with a form feed; otherwise, print a CR to start output
+	 * at the beginning of the line.
+	 */
+	if (pending_newline) {
+		rtas_call(display_character, 1, 1, NULL, '\r');
+		rtas_call(display_character, 1, 1, NULL, '\n');
+		pending_newline = 0;
+	} else {
+		current_line = 0;
+		if (form_feed)
+			rtas_call(display_character, 1, 1, NULL,
+				  (char)form_feed);
+		else
+			rtas_call(display_character, 1, 1, NULL, '\r');
+	}
+ 
+	if (row_width)
+		width = row_width[current_line];
+	else
+		width = display_width;
+	os = s;
+	while (*os) {
+		if (*os == '\n' || *os == '\r') {
+			/* If newline is the last character, save it
+			 * until next call to avoid bumping up the
+			 * display output.
+			 */
+			if (*os == '\n' && !os[1]) {
+				pending_newline = 1;
+				current_line++;
+				if (current_line > display_lines-1)
+					current_line = display_lines-1;
+				spin_unlock(&progress_lock);
+				return;
+			}
+ 
+			/* RTAS wants CR-LF, not just LF */
+ 
+			if (*os == '\n') {
+				rtas_call(display_character, 1, 1, NULL, '\r');
+				rtas_call(display_character, 1, 1, NULL, '\n');
+			} else {
+				/* CR might be used to re-draw a line, so we'll
+				 * leave it alone and not add LF.
+				 */
+				rtas_call(display_character, 1, 1, NULL, *os);
+			}
+ 
+			if (row_width)
+				width = row_width[current_line];
+			else
+				width = display_width;
+		} else {
+			width--;
+			rtas_call(display_character, 1, 1, NULL, *os);
+		}
+ 
+		os++;
+ 
+		/* if we overwrite the screen length */
+		if (width <= 0)
+			while ((*os != 0) && (*os != '\n') && (*os != '\r'))
+				os++;
+	}
+ 
+	spin_unlock(&progress_lock);
+}
+
 int
 rtas_token(const char *service)
 {
@@ -425,8 +542,8 @@ rtas_flash_firmware(void)
 
 	printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
 	printk(KERN_ALERT "FLASH: performing flash and reboot\n");
-	ppc_md.progress("Flashing        \n", 0x0);
-	ppc_md.progress("Please Wait...  ", 0x0);
+	rtas_progress("Flashing        \n", 0x0);
+	rtas_progress("Please Wait...  ", 0x0);
 	printk(KERN_ALERT "FLASH: this will take several minutes.  Do not power off!\n");
 	status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
 	switch (status) {	/* should only get "bad" status */

arch/ppc64/kernel/rtc.c

@@ -301,7 +301,7 @@ void iSeries_get_boot_time(struct rtc_time *tm)
 #ifdef CONFIG_PPC_RTAS
 #define MAX_RTC_WAIT 5000	/* 5 sec */
 #define RTAS_CLOCK_BUSY (-2)
-void pSeries_get_boot_time(struct rtc_time *rtc_tm)
+void rtas_get_boot_time(struct rtc_time *rtc_tm)
 {
 	int ret[8];
 	int error, wait_time;
@@ -336,7 +336,7 @@ void pSeries_get_boot_time(struct rtc_time *rtc_tm)
  * and if a delay is needed to read the clock.  In this case we just
  * silently return without updating rtc_tm.
  */
-void pSeries_get_rtc_time(struct rtc_time *rtc_tm)
+void rtas_get_rtc_time(struct rtc_time *rtc_tm)
 {
         int ret[8];
 	int error, wait_time;
@@ -371,7 +371,7 @@ void pSeries_get_rtc_time(struct rtc_time *rtc_tm)
 	rtc_tm->tm_year = ret[0] - 1900;
 }
 
-int pSeries_set_rtc_time(struct rtc_time *tm)
+int rtas_set_rtc_time(struct rtc_time *tm)
 {
 	int error, wait_time;
 	unsigned long max_wait_tb;

arch/ppc64/kernel/setup.c

@@ -344,6 +344,7 @@ static void __init setup_cpu_maps(void)
 extern struct machdep_calls pSeries_md;
 extern struct machdep_calls pmac_md;
 extern struct machdep_calls maple_md;
+extern struct machdep_calls bpa_md;
 
 /* Ultimately, stuff them in an elf section like initcalls... */
 static struct machdep_calls __initdata *machines[] = {
@@ -356,6 +357,9 @@ static struct machdep_calls __initdata *machines[] = {
 #ifdef CONFIG_PPC_MAPLE
 	&maple_md,
 #endif /* CONFIG_PPC_MAPLE */
+#ifdef CONFIG_PPC_BPA
+	&bpa_md,
+#endif
 	NULL
 };
 
@@ -679,6 +683,12 @@ void machine_restart(char *cmd)
 	if (ppc_md.nvram_sync)
 		ppc_md.nvram_sync();
 	ppc_md.restart(cmd);
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	local_irq_disable();
+	while (1) ;
 }
 
 EXPORT_SYMBOL(machine_restart);
@@ -688,6 +698,12 @@ void machine_power_off(void)
 	if (ppc_md.nvram_sync)
 		ppc_md.nvram_sync();
 	ppc_md.power_off();
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	local_irq_disable();
+	while (1) ;
 }
 
 EXPORT_SYMBOL(machine_power_off);
@@ -697,13 +713,16 @@ void machine_halt(void)
 	if (ppc_md.nvram_sync)
 		ppc_md.nvram_sync();
 	ppc_md.halt();
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
+	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+	local_irq_disable();
+	while (1) ;
 }
 
 EXPORT_SYMBOL(machine_halt);
 
-unsigned long ppc_proc_freq;
-unsigned long ppc_tb_freq;
-
 static int ppc64_panic_event(struct notifier_block *this,
                              unsigned long event, void *ptr)
 {
@@ -1080,11 +1099,11 @@ void __init setup_arch(char **cmdline_p)
 static void ppc64_do_msg(unsigned int src, const char *msg)
 {
 	if (ppc_md.progress) {
-		char buf[32];
+		char buf[128];
 
-		sprintf(buf, "%08x        \n", src);
+		sprintf(buf, "%08X\n", src);
 		ppc_md.progress(buf, 0);
-		sprintf(buf, "%-16s", msg);
+		snprintf(buf, 128, "%s", msg);
 		ppc_md.progress(buf, 0);
 	}
 }
@@ -1118,7 +1137,7 @@ void ppc64_dump_msg(unsigned int src, const char *msg)
 }
 
 /* This should only be called on processor 0 during calibrate decr */
-void setup_default_decr(void)
+void __init setup_default_decr(void)
 {
 	struct paca_struct *lpaca = get_paca();
 

arch/ppc64/kernel/smp.c

@@ -71,7 +71,7 @@ void smp_call_function_interrupt(void);
 
 int smt_enabled_at_boot = 1;
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_MPIC
 void smp_mpic_message_pass(int target, int msg)
 {
 	/* make sure we're sending something that translates to an IPI */
@@ -128,7 +128,7 @@ void __devinit smp_generic_kick_cpu(int nr)
 	smp_mb();
 }
 
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_MPIC */
 
 static void __init smp_space_timers(unsigned int max_cpus)
 {

arch/ppc64/kernel/spider-pic.c

+/*
+ * External Interrupt Controller on Spider South Bridge
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+
+#include "bpa_iic.h"
+
+/* register layout taken from Spider spec, table 7.4-4 */
+enum {
+	TIR_DEN		= 0x004, /* Detection Enable Register */
+	TIR_MSK		= 0x084, /* Mask Level Register */
+	TIR_EDC		= 0x0c0, /* Edge Detection Clear Register */
+	TIR_PNDA	= 0x100, /* Pending Register A */
+	TIR_PNDB	= 0x104, /* Pending Register B */
+	TIR_CS		= 0x144, /* Current Status Register */
+	TIR_LCSA	= 0x150, /* Level Current Status Register A */
+	TIR_LCSB	= 0x154, /* Level Current Status Register B */
+	TIR_LCSC	= 0x158, /* Level Current Status Register C */
+	TIR_LCSD	= 0x15c, /* Level Current Status Register D */
+	TIR_CFGA	= 0x200, /* Setting Register A0 */
+	TIR_CFGB	= 0x204, /* Setting Register B0 */
+			/* 0x208 ... 0x3ff Setting Register An/Bn */
+	TIR_PPNDA	= 0x400, /* Packet Pending Register A */
+	TIR_PPNDB	= 0x404, /* Packet Pending Register B */
+	TIR_PIERA	= 0x408, /* Packet Output Error Register A */
+	TIR_PIERB	= 0x40c, /* Packet Output Error Register B */
+	TIR_PIEN	= 0x444, /* Packet Output Enable Register */
+	TIR_PIPND	= 0x454, /* Packet Output Pending Register */
+	TIRDID		= 0x484, /* Spider Device ID Register */
+	REISTIM		= 0x500, /* Reissue Command Timeout Time Setting */
+	REISTIMEN	= 0x504, /* Reissue Command Timeout Setting */
+	REISWAITEN	= 0x508, /* Reissue Wait Control*/
+};
+
+static void __iomem *spider_pics[4];
+
+static void __iomem *spider_get_pic(int irq)
+{
+	int node = irq / IIC_NODE_STRIDE;
+	irq %= IIC_NODE_STRIDE;
+
+	if (irq >= IIC_EXT_OFFSET &&
+	    irq < IIC_EXT_OFFSET + IIC_NUM_EXT &&
+	    spider_pics)
+		return spider_pics[node];
+	return NULL;
+}
+
+static int spider_get_nr(unsigned int irq)
+{
+	return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET;
+}
+
+static void __iomem *spider_get_irq_config(int irq)
+{
+	void __iomem *pic;
+	pic = spider_get_pic(irq);
+	return pic + TIR_CFGA + 8 * spider_get_nr(irq);
+}
+
+static void spider_enable_irq(unsigned int irq)
+{
+	void __iomem *cfg = spider_get_irq_config(irq);
+	irq = spider_get_nr(irq);
+
+	out_be32(cfg, in_be32(cfg) | 0x3107000eu);
+	out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq);
+}
+
+static void spider_disable_irq(unsigned int irq)
+{
+	void __iomem *cfg = spider_get_irq_config(irq);
+	irq = spider_get_nr(irq);
+
+	out_be32(cfg, in_be32(cfg) & ~0x30000000u);
+}
+
+static unsigned int spider_startup_irq(unsigned int irq)
+{
+	spider_enable_irq(irq);
+	return 0;
+}
+
+static void spider_shutdown_irq(unsigned int irq)
+{
+	spider_disable_irq(irq);
+}
+
+static void spider_end_irq(unsigned int irq)
+{
+	spider_enable_irq(irq);
+}
+
+static void spider_ack_irq(unsigned int irq)
+{
+	spider_disable_irq(irq);
+	iic_local_enable();
+}
+
+static struct hw_interrupt_type spider_pic = {
+	.typename = " SPIDER   ",
+	.startup = spider_startup_irq,
+	.shutdown = spider_shutdown_irq,
+	.enable = spider_enable_irq,
+	.disable = spider_disable_irq,
+	.ack = spider_ack_irq,
+	.end = spider_end_irq,
+};
+
+
+int spider_get_irq(unsigned long int_pending)
+{
+	void __iomem *regs = spider_get_pic(int_pending);
+	unsigned long cs;
+	int irq;
+
+	cs = in_be32(regs + TIR_CS);
+
+	irq = cs >> 24;
+	if (irq != 63)
+		return irq;
+
+	return -1;
+}
+ 
+void spider_init_IRQ(void)
+{
+	int node;
+	struct device_node *dn;
+	unsigned int *property;
+	long spiderpic;
+	int n;
+
+/* FIXME: detect multiple PICs as soon as the device tree has them */
+	for (node = 0; node < 1; node++) {
+		dn = of_find_node_by_path("/");
+		n = prom_n_addr_cells(dn);
+		property = (unsigned int *) get_property(dn,
+				"platform-spider-pic", NULL);
+
+		if (!property)
+			continue;
+		for (spiderpic = 0; n > 0; --n)
+			spiderpic = (spiderpic << 32) + *property++;
+		printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic);
+		spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE);
+		for (n = 0; n < IIC_NUM_EXT; n++) {
+			int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
+			get_irq_desc(irq)->handler = &spider_pic;
+
+ 		/* do not mask any interrupts because of level */
+ 		out_be32(spider_pics[node] + TIR_MSK, 0x0);
+ 		
+ 		/* disable edge detection clear */
+ 		/* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
+ 		
+ 		/* enable interrupt packets to be output */
+ 		out_be32(spider_pics[node] + TIR_PIEN,
+			in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
+ 		
+ 		/* Enable the interrupt detection enable bit. Do this last! */
+ 		out_be32(spider_pics[node] + TIR_DEN,
+			in_be32(spider_pics[node] +TIR_DEN) | 0x1);
+
+		}
+	}
+}

arch/ppc64/kernel/time.c

@@ -107,6 +107,9 @@ void ppc_adjtimex(void);
 
 static unsigned adjusting_time = 0;
 
+unsigned long ppc_proc_freq;
+unsigned long ppc_tb_freq;
+
 static __inline__ void timer_check_rtc(void)
 {
         /*
@@ -472,6 +475,66 @@ int do_settimeofday(struct timespec *tv)
 
 EXPORT_SYMBOL(do_settimeofday);
 
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA)
+void __init generic_calibrate_decr(void)
+{
+	struct device_node *cpu;
+	struct div_result divres;
+	unsigned int *fp;
+	int node_found;
+
+	/*
+	 * The cpu node should have a timebase-frequency property
+	 * to tell us the rate at which the decrementer counts.
+	 */
+	cpu = of_find_node_by_type(NULL, "cpu");
+
+	ppc_tb_freq = DEFAULT_TB_FREQ;		/* hardcoded default */
+	node_found = 0;
+	if (cpu != 0) {
+		fp = (unsigned int *)get_property(cpu, "timebase-frequency",
+						  NULL);
+		if (fp != 0) {
+			node_found = 1;
+			ppc_tb_freq = *fp;
+		}
+	}
+	if (!node_found)
+		printk(KERN_ERR "WARNING: Estimating decrementer frequency "
+				"(not found)\n");
+
+	ppc_proc_freq = DEFAULT_PROC_FREQ;
+	node_found = 0;
+	if (cpu != 0) {
+		fp = (unsigned int *)get_property(cpu, "clock-frequency",
+						  NULL);
+		if (fp != 0) {
+			node_found = 1;
+			ppc_proc_freq = *fp;
+		}
+	}
+	if (!node_found)
+		printk(KERN_ERR "WARNING: Estimating processor frequency "
+				"(not found)\n");
+
+	of_node_put(cpu);
+
+	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+	       ppc_tb_freq/1000000, ppc_tb_freq%1000000);
+	printk(KERN_INFO "time_init: processor frequency   = %lu.%.6lu MHz\n",
+	       ppc_proc_freq/1000000, ppc_proc_freq%1000000);
+
+	tb_ticks_per_jiffy = ppc_tb_freq / HZ;
+	tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
+	tb_ticks_per_usec = ppc_tb_freq / 1000000;
+	tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
+	div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres);
+	tb_to_xs = divres.result_low;
+
+	setup_default_decr();
+}
+#endif
+
 void __init time_init(void)
 {
 	/* This function is only called on the boot processor */

arch/ppc64/kernel/traps.c

@@ -126,6 +126,10 @@ int die(const char *str, struct pt_regs *regs, long err)
 			printk("POWERMAC ");
 			nl = 1;
 			break;
+		case PLATFORM_BPA:
+			printk("BPA ");
+			nl = 1;
+			break;
 	}
 	if (nl)
 		printk("\n");

drivers/char/watchdog/Kconfig

@@ -414,6 +414,16 @@ config WATCHDOG_RIO
 	  machines.  The watchdog timeout period is normally one minute but
 	  can be changed with a boot-time parameter.
 
+# ppc64 RTAS watchdog
+config WATCHDOG_RTAS
+	tristate "RTAS watchdog"
+	depends on WATCHDOG && PPC_RTAS
+	help
+	  This driver adds watchdog support for the RTAS watchdog.
+
+          To compile this driver as a module, choose M here. The module
+	  will be called wdrtas.
+
 #
 # ISA-based Watchdog Cards
 #

drivers/char/watchdog/Makefile

@@ -33,6 +33,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
 obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
 obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o
 obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
+obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
 
 # Only one watchdog can succeed. We probe the hardware watchdog
 # drivers first, then the softdog driver.  This means if your hardware

include/asm-ppc64/machdep.h

@@ -76,6 +76,7 @@ struct machdep_calls {
 	void		(*tce_flush)(struct iommu_table *tbl);
 	void		(*iommu_dev_setup)(struct pci_dev *dev);
 	void		(*iommu_bus_setup)(struct pci_bus *bus);
+	void		(*irq_bus_setup)(struct pci_bus *bus);
 
 	int		(*probe)(int platform);
 	void		(*setup_arch)(void);

include/asm-ppc64/mmu.h

@@ -47,9 +47,10 @@
 #define SLB_VSID_KS		ASM_CONST(0x0000000000000800)
 #define SLB_VSID_KP		ASM_CONST(0x0000000000000400)
 #define SLB_VSID_N		ASM_CONST(0x0000000000000200) /* no-execute */
-#define SLB_VSID_L		ASM_CONST(0x0000000000000100) /* largepage 16M */
+#define SLB_VSID_L		ASM_CONST(0x0000000000000100) /* largepage */
 #define SLB_VSID_C		ASM_CONST(0x0000000000000080) /* class */
-
+#define SLB_VSID_LS		ASM_CONST(0x0000000000000070) /* size of largepage */
+ 
 #define SLB_VSID_KERNEL		(SLB_VSID_KP|SLB_VSID_C)
 #define SLB_VSID_USER		(SLB_VSID_KP|SLB_VSID_KS)
 

include/asm-ppc64/nvram.h

@@ -70,6 +70,7 @@ extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
 
 extern int pSeries_nvram_init(void);
 extern int pmac_nvram_init(void);
+extern int bpa_nvram_init(void);
 
 /* PowerMac specific nvram stuffs */
 

include/asm-ppc64/processor.h

@@ -138,8 +138,16 @@
 #define	SPRN_NIADORM	0x3F3	/* Hardware Implementation Register 2 */
 #define SPRN_HID4	0x3F4	/* 970 HID4 */
 #define SPRN_HID5	0x3F6	/* 970 HID5 */
-#define	SPRN_TSC 	0x3FD	/* Thread switch control */
-#define	SPRN_TST 	0x3FC	/* Thread switch timeout */
+#define	SPRN_HID6	0x3F9	/* BE HID 6 */
+#define	  HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
+#define	  HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
+#define	SPRN_TSCR	0x399   /* Thread switch control on BE */
+#define	SPRN_TTR	0x39A   /* Thread switch timeout on BE */
+#define	  TSCR_DEC_ENABLE	0x200000 /* Decrementer Interrupt */
+#define	  TSCR_EE_ENABLE	0x100000 /* External Interrupt */
+#define	  TSCR_EE_BOOST		0x080000 /* External Interrupt Boost */
+#define	SPRN_TSC 	0x3FD	/* Thread switch control on others */
+#define	SPRN_TST 	0x3FC	/* Thread switch timeout on others */
 #define	SPRN_L2CR	0x3F9	/* Level 2 Cache Control Regsiter */
 #define	SPRN_LR		0x008	/* Link Register */
 #define	SPRN_PIR	0x3FF	/* Processor Identification Register */
@@ -259,6 +267,7 @@
 #define PV_970FX	0x003C
 #define	PV_630        	0x0040
 #define	PV_630p	        0x0041
+#define	PV_BE		0x0070
 
 /* Platforms supported by PPC64 */
 #define PLATFORM_PSERIES      0x0100
@@ -267,6 +276,7 @@
 #define PLATFORM_LPAR         0x0001
 #define PLATFORM_POWERMAC     0x0400
 #define PLATFORM_MAPLE        0x0500
+#define PLATFORM_BPA          0x1000
 
 /* Compatibility with drivers coming from PPC32 world */
 #define _machine	(systemcfg->platform)
@@ -278,6 +288,7 @@
 #define IC_INVALID    0
 #define IC_OPEN_PIC   1
 #define IC_PPC_XIC    2
+#define IC_BPA_IIC    3
 
 #define XGLUE(a,b) a##b
 #define GLUE(a,b) XGLUE(a,b)

include/asm-ppc64/rtas.h

@@ -186,8 +186,14 @@ extern int rtas_get_sensor(int sensor, int index, int *state);
 extern int rtas_get_power_level(int powerdomain, int *level);
 extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
 extern int rtas_set_indicator(int indicator, int index, int new_value);
+extern void rtas_progress(char *s, unsigned short hex);
 extern void rtas_initialize(void);
 
+struct rtc_time;
+extern void rtas_get_boot_time(struct rtc_time *rtc_time);
+extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
+extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
+
 /* Given an RTAS status code of 9900..9905 compute the hinted delay */
 unsigned int rtas_extended_busy_delay_time(int status);
 static inline int rtas_is_extended_busy(int status)

include/asm-ppc64/smp.h

@@ -85,6 +85,14 @@ extern void smp_generic_take_timebase(void);
 
 extern struct smp_ops_t *smp_ops;
 
+#ifdef CONFIG_PPC_PSERIES
+void vpa_init(int cpu);
+#else
+static inline void vpa_init(int cpu)
+{
+}
+#endif /* CONFIG_PPC_PSERIES */
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* !(_PPC64_SMP_H) */

include/asm-ppc64/time.h

@@ -34,6 +34,15 @@ struct rtc_time;
 extern void to_tm(int tim, struct rtc_time * tm);
 extern time_t last_rtc_update;
 
+void generic_calibrate_decr(void);
+void setup_default_decr(void);
+
+/* Some sane defaults: 125 MHz timebase, 1GHz processor */
+extern unsigned long ppc_proc_freq;
+#define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
+extern unsigned long ppc_tb_freq;
+#define DEFAULT_TB_FREQ		125000000UL
+
 /*
  * By putting all of this stuff into a single struct we 
  * reduce the number of cache lines touched by do_gettimeofday.