ARM: 6384/1: Remove the domain switching on ARMv6k/v7 CPUs

This patch removes the domain switching functionality via the set_fs and
__switch_to functions on cores that have a TLS register.

Currently, the ioremap and vmalloc areas share the same level 1 page
tables and therefore have the same domain (DOMAIN_KERNEL). When the
kernel domain is modified from Client to Manager (via the __set_fs or in
the __switch_to function), the XN (eXecute Never) bit is overridden and
newer CPUs can speculatively prefetch the ioremap'ed memory.

Linux performs the kernel domain switching to allow user-specific
functions (copy_to/from_user, get/put_user etc.) to access kernel
memory. In order for these functions to work with the kernel domain set
to Client, the patch modifies the LDRT/STRT and related instructions to
the LDR/STR ones.

The user pages access rights are also modified for kernel read-only
access rather than read/write so that the copy-on-write mechanism still
works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register
(CPU_32v6K is defined) since writing the TLS value to the high vectors page
isn't possible.

The user addresses passed to the kernel are checked by the access_ok()
function so that they do not point to the kernel space.
Tested-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/include/asm/assembler.h

@@ -18,6 +18,7 @@
 #endif
 
 #include <asm/ptrace.h>
+#include <asm/domain.h>
 
 /*
  * Endian independent macros for shifting bytes within registers.
@@ -206,12 +207,12 @@
  */
 #ifdef CONFIG_THUMB2_KERNEL
 
-	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
 9999:
 	.if	\inc == 1
-	\instr\cond\()bt \reg, [\ptr, #\off]
+	\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
 	.elseif	\inc == 4
-	\instr\cond\()t \reg, [\ptr, #\off]
+	\instr\cond\()\t\().w \reg, [\ptr, #\off]
 	.else
 	.error	"Unsupported inc macro argument"
 	.endif
@@ -246,13 +247,13 @@
 
 #else	/* !CONFIG_THUMB2_KERNEL */
 
-	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
 	.rept	\rept
 9999:
 	.if	\inc == 1
-	\instr\cond\()bt \reg, [\ptr], #\inc
+	\instr\cond\()b\()\t \reg, [\ptr], #\inc
 	.elseif	\inc == 4
-	\instr\cond\()t \reg, [\ptr], #\inc
+	\instr\cond\()\t \reg, [\ptr], #\inc
 	.else
 	.error	"Unsupported inc macro argument"
 	.endif

arch/arm/include/asm/domain.h

@@ -45,13 +45,17 @@
  */
 #define DOMAIN_NOACCESS	0
 #define DOMAIN_CLIENT	1
+#ifdef CONFIG_CPU_USE_DOMAINS
 #define DOMAIN_MANAGER	3
+#else
+#define DOMAIN_MANAGER	1
+#endif
 
 #define domain_val(dom,type)	((type) << (2*(dom)))
 
 #ifndef __ASSEMBLY__
 
-#ifdef CONFIG_MMU
+#ifdef CONFIG_CPU_USE_DOMAINS
 #define set_domain(x)					\
 	do {						\
 	__asm__ __volatile__(				\
@@ -74,5 +78,28 @@
 #define modify_domain(dom,type)	do { } while (0)
 #endif
 
+/*
+ * Generate the T (user) versions of the LDR/STR and related
+ * instructions (inline assembly)
+ */
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define T(instr)	#instr "t"
+#else
+#define T(instr)	#instr
 #endif
-#endif /* !__ASSEMBLY__ */
+
+#else /* __ASSEMBLY__ */
+
+/*
+ * Generate the T (user) versions of the LDR/STR and related
+ * instructions
+ */
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define T(instr)	instr ## t
+#else
+#define T(instr)	instr
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* !__ASM_PROC_DOMAIN_H */

arch/arm/include/asm/futex.h

@@ -13,12 +13,13 @@
 #include <linux/preempt.h>
 #include <linux/uaccess.h>
 #include <asm/errno.h>
+#include <asm/domain.h>
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	ldrt	%1, [%2]\n"				\
+	"1:	" T(ldr) "	%1, [%2]\n"			\
 	"	" insn "\n"					\
-	"2:	strt	%0, [%2]\n"				\
+	"2:	" T(str) "	%0, [%2]\n"			\
 	"	mov	%0, #0\n"				\
 	"3:\n"							\
 	"	.pushsection __ex_table,\"a\"\n"		\
@@ -97,10 +98,10 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	pagefault_disable();	/* implies preempt_disable() */
 
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	ldrt	%0, [%3]\n"
+	"1:	" T(ldr) "	%0, [%3]\n"
 	"	teq	%0, %1\n"
 	"	it	eq	@ explicit IT needed for the 2b label\n"
-	"2:	streqt	%2, [%3]\n"
+	"2:	" T(streq) "	%2, [%3]\n"
 	"3:\n"
 	"	.pushsection __ex_table,\"a\"\n"
 	"	.align	3\n"

arch/arm/include/asm/traps.h

@@ -27,4 +27,6 @@ static inline int in_exception_text(unsigned long ptr)
 extern void __init early_trap_init(void);
 extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
 
+extern void *vectors_page;
+
 #endif

arch/arm/include/asm/uaccess.h

@@ -227,7 +227,7 @@ do {									\
 
 #define __get_user_asm_byte(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	ldrbt	%1,[%2]\n"				\
+	"1:	" T(ldrb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -263,7 +263,7 @@ do {									\
 
 #define __get_user_asm_word(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	ldrt	%1,[%2]\n"				\
+	"1:	" T(ldr) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -308,7 +308,7 @@ do {									\
 
 #define __put_user_asm_byte(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strbt	%1,[%2]\n"				\
+	"1:	" T(strb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -341,7 +341,7 @@ do {									\
 
 #define __put_user_asm_word(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strt	%1,[%2]\n"				\
+	"1:	" T(str) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -366,10 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
- ARM(	"1:	strt	" __reg_oper1 ", [%1], #4\n"	)	\
- ARM(	"2:	strt	" __reg_oper0 ", [%1]\n"	)	\
- THUMB(	"1:	strt	" __reg_oper1 ", [%1]\n"	)	\
- THUMB(	"2:	strt	" __reg_oper0 ", [%1, #4]\n"	)	\
+ ARM(	"1:	" T(str) "	" __reg_oper1 ", [%1], #4\n"	)	\
+ ARM(	"2:	" T(str) "	" __reg_oper0 ", [%1]\n"	)	\
+ THUMB(	"1:	" T(str) "	" __reg_oper1 ", [%1]\n"	)	\
+ THUMB(	"2:	" T(str) "	" __reg_oper0 ", [%1, #4]\n"	)	\
 	"3:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\

arch/arm/kernel/entry-armv.S

@@ -735,7 +735,7 @@ ENTRY(__switch_to)
  THUMB(	stmia	ip!, {r4 - sl, fp}	   )	@ Store most regs on stack
  THUMB(	str	sp, [ip], #4		   )
  THUMB(	str	lr, [ip], #4		   )
-#ifdef CONFIG_MMU
+#ifdef CONFIG_CPU_USE_DOMAINS
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
 	set_tls	r3, r4, r5
@@ -744,7 +744,7 @@ ENTRY(__switch_to)
 	ldr	r8, =__stack_chk_guard
 	ldr	r7, [r7, #TSK_STACK_CANARY]
 #endif
-#ifdef CONFIG_MMU
+#ifdef CONFIG_CPU_USE_DOMAINS
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
 #endif
 	mov	r5, r0

arch/arm/kernel/fiq.c

@@ -45,6 +45,7 @@
 #include <asm/fiq.h>
 #include <asm/irq.h>
 #include <asm/system.h>
+#include <asm/traps.h>
 
 static unsigned long no_fiq_insn;
 
@@ -77,7 +78,11 @@ int show_fiq_list(struct seq_file *p, void *v)
 
 void set_fiq_handler(void *start, unsigned int length)
 {
+#if defined(CONFIG_CPU_USE_DOMAINS)
 	memcpy((void *)0xffff001c, start, length);
+#else
+	memcpy(vectors_page + 0x1c, start, length);
+#endif
 	flush_icache_range(0xffff001c, 0xffff001c + length);
 	if (!vectors_high())
 		flush_icache_range(0x1c, 0x1c + length);

arch/arm/kernel/traps.c

@@ -37,6 +37,8 @@
 
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
 
+void *vectors_page;
+
 #ifdef CONFIG_DEBUG_USER
 unsigned int user_debug;
 
@@ -759,7 +761,11 @@ static void __init kuser_get_tls_init(unsigned long vectors)
 
 void __init early_trap_init(void)
 {
+#if defined(CONFIG_CPU_USE_DOMAINS)
 	unsigned long vectors = CONFIG_VECTORS_BASE;
+#else
+	unsigned long vectors = (unsigned long)vectors_page;
+#endif
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	extern char __kuser_helper_start[], __kuser_helper_end[];
@@ -783,10 +789,10 @@ void __init early_trap_init(void)
 	 * Copy signal return handlers into the vector page, and
 	 * set sigreturn to be a pointer to these.
 	 */
-	memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
-	       sizeof(sigreturn_codes));
-	memcpy((void *)KERN_RESTART_CODE, syscall_restart_code,
-	       sizeof(syscall_restart_code));
+	memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
+	       sigreturn_codes, sizeof(sigreturn_codes));
+	memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+	       syscall_restart_code, sizeof(syscall_restart_code));
 
 	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);

arch/arm/lib/getuser.S

@@ -28,20 +28,21 @@
  */
 #include <linux/linkage.h>
 #include <asm/errno.h>
+#include <asm/domain.h>
 
 ENTRY(__get_user_1)
-1:	ldrbt	r2, [r0]
+1:	T(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
 #ifdef CONFIG_THUMB2_KERNEL
-2:	ldrbt	r2, [r0]
-3:	ldrbt	r3, [r0, #1]
+2:	T(ldrb)	r2, [r0]
+3:	T(ldrb)	r3, [r0, #1]
 #else
-2:	ldrbt	r2, [r0], #1
-3:	ldrbt	r3, [r0]
+2:	T(ldrb)	r2, [r0], #1
+3:	T(ldrb)	r3, [r0]
 #endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
@@ -53,7 +54,7 @@ ENTRY(__get_user_2)
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
-4:	ldrt	r2, [r0]
+4:	T(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_4)

arch/arm/lib/putuser.S

@@ -28,9 +28,10 @@
  */
 #include <linux/linkage.h>
 #include <asm/errno.h>
+#include <asm/domain.h>
 
 ENTRY(__put_user_1)
-1:	strbt	r2, [r0]
+1:	T(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
@@ -39,19 +40,19 @@ ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
-2:	strbt	r2, [r0]
-3:	strbt	ip, [r0, #1]
+2:	T(strb)	r2, [r0]
+3:	T(strb)	ip, [r0, #1]
 #else
-2:	strbt	ip, [r0]
-3:	strbt	r2, [r0, #1]
+2:	T(strb)	ip, [r0]
+3:	T(strb)	r2, [r0, #1]
 #endif
 #else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
-2:	strbt	r2, [r0], #1
-3:	strbt	ip, [r0]
+2:	T(strb)	r2, [r0], #1
+3:	T(strb)	ip, [r0]
 #else
-2:	strbt	ip, [r0], #1
-3:	strbt	r2, [r0]
+2:	T(strb)	ip, [r0], #1
+3:	T(strb)	r2, [r0]
 #endif
 #endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
@@ -59,18 +60,18 @@ ENTRY(__put_user_2)
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
-4:	strt	r2, [r0]
+4:	T(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
 #ifdef CONFIG_THUMB2_KERNEL
-5:	strt	r2, [r0]
-6:	strt	r3, [r0, #4]
+5:	T(str)	r2, [r0]
+6:	T(str)	r3, [r0, #4]
 #else
-5:	strt	r2, [r0], #4
-6:	strt	r3, [r0]
+5:	T(str)	r2, [r0], #4
+6:	T(str)	r3, [r0]
 #endif
 	mov	r0, #0
 	mov	pc, lr

arch/arm/lib/uaccess.S

@@ -14,6 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/errno.h>
+#include <asm/domain.h>
 
 		.text
 
@@ -31,11 +32,11 @@
 		rsb	ip, ip, #4
 		cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		sub	r2, r2, ip
 		b	.Lc2u_dest_aligned
 
@@ -58,7 +59,7 @@ ENTRY(__copy_to_user)
 		addmi	ip, r2, #4
 		bmi	.Lc2u_0nowords
 		ldr	r3, [r1], #4
-USER(		strt	r3, [r0], #4)			@ May fault
+USER(		T(str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -87,18 +88,18 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
 		tst	ip, #4
 		ldrne	r3, [r1], #4
-		strnet	r3, [r0], #4			@ Shouldnt fault
+		T(strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_0fupi
 .Lc2u_0nowords:	teq	ip, #0
 		beq	.Lc2u_finished
 .Lc2u_nowords:	cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_not_enough:
@@ -119,7 +120,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #8
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #24
-USER(		strt	r3, [r0], #4)			@ May fault
+USER(		T(str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -154,18 +155,18 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #8
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #24
-		strnet	r3, [r0], #4			@ Shouldnt fault
+		T(strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_1fupi
 .Lc2u_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_2
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		movgt	r3, r7, get_byte_3
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_2fupi:	subs	r2, r2, #4
@@ -174,7 +175,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #16
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #16
-USER(		strt	r3, [r0], #4)			@ May fault
+USER(		T(str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -209,18 +210,18 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #16
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #16
-		strnet	r3, [r0], #4			@ Shouldnt fault
+		T(strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_2fupi
 .Lc2u_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_3
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_3fupi:	subs	r2, r2, #4
@@ -229,7 +230,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #24
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #8
-USER(		strt	r3, [r0], #4)			@ May fault
+USER(		T(str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -264,18 +265,18 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #24
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #8
-		strnet	r3, [r0], #4			@ Shouldnt fault
+		T(strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_3fupi
 .Lc2u_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 ENDPROC(__copy_to_user)
 
@@ -294,11 +295,11 @@ ENDPROC(__copy_to_user)
 .Lcfu_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
-USER(		ldrbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		ldrgebt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		ldrgtbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		sub	r2, r2, ip
 		b	.Lcfu_dest_aligned
@@ -321,7 +322,7 @@ ENTRY(__copy_from_user)
 .Lcfu_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lcfu_0nowords
-USER(		ldrt	r3, [r1], #4)
+USER(		T(ldr)	r3, [r1], #4)
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
@@ -350,18 +351,18 @@ USER(		ldrt	r3, [r1], #4)
 		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
-		ldrnet	r3, [r1], #4			@ Shouldnt fault
+		T(ldrne) r3, [r1], #4			@ Shouldnt fault
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
 		beq	.Lcfu_0fupi
 .Lcfu_0nowords:	teq	ip, #0
 		beq	.Lcfu_finished
 .Lcfu_nowords:	cmp	ip, #2
-USER(		ldrbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		ldrgebt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		ldrgtbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -374,7 +375,7 @@ USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 
 .Lcfu_src_not_aligned:
 		bic	r1, r1, #3
-USER(		ldrt	r7, [r1], #4)			@ May fault
+USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		cmp	ip, #2
 		bgt	.Lcfu_3fupi
 		beq	.Lcfu_2fupi
@@ -382,7 +383,7 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_1nowords
 		mov	r3, r7, pull #8
-USER(		ldrt	r7, [r1], #4)			@ May fault
+USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #24
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -417,7 +418,7 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #8
-USER(		ldrnet	r7, [r1], #4)			@ May fault
+USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -437,7 +438,7 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_2nowords
 		mov	r3, r7, pull #16
-USER(		ldrt	r7, [r1], #4)			@ May fault
+USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #16
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -473,7 +474,7 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #16
-USER(		ldrnet	r7, [r1], #4)			@ May fault
+USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -485,7 +486,7 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_3
 		strgeb	r3, [r0], #1
-USER(		ldrgtbt	r3, [r1], #0)			@ May fault
+USER(		T(ldrgtb) r3, [r1], #0)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -493,7 +494,7 @@ USER(		ldrgtbt	r3, [r1], #0)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_3nowords
 		mov	r3, r7, pull #24
-USER(		ldrt	r7, [r1], #4)			@ May fault
+USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #8
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -528,7 +529,7 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #24
-USER(		ldrnet	r7, [r1], #4)			@ May fault
+USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -538,9 +539,9 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
-USER(		ldrgebt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		ldrgtbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 ENDPROC(__copy_from_user)

arch/arm/mm/Kconfig

@@ -599,6 +599,14 @@ config CPU_CP15_MPU
 	help
 	  Processor has the CP15 register, which has MPU related registers.
 
+config CPU_USE_DOMAINS
+	bool
+	depends on MMU
+	default y if !CPU_32v6K
+	help
+	  This option enables or disables the use of domain switching
+	  via the set_fs() function.
+
 #
 # CPU supports 36-bit I/O
 #

arch/arm/mm/mmu.c

@@ -24,6 +24,7 @@
 #include <asm/smp_plat.h>
 #include <asm/tlb.h>
 #include <asm/highmem.h>
+#include <asm/traps.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -914,12 +915,11 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 {
 	struct map_desc map;
 	unsigned long addr;
-	void *vectors;
 
 	/*
 	 * Allocate the vector page early.
 	 */
-	vectors = early_alloc(PAGE_SIZE);
+	vectors_page = early_alloc(PAGE_SIZE);
 
 	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -959,7 +959,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	 * location (0xffff0000).  If we aren't using high-vectors, also
 	 * create a mapping at the low-vectors virtual address.
 	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+	map.pfn = __phys_to_pfn(virt_to_phys(vectors_page));
 	map.virtual = 0xffff0000;
 	map.length = PAGE_SIZE;
 	map.type = MT_HIGH_VECTORS;

arch/arm/mm/proc-macros.S

@@ -99,6 +99,10 @@
  *  110x   0   1   0	r/w	r/o
  *  11x0   0   1   0	r/w	r/o
  *  1111   0   1   1	r/w	r/w
+ *
+ * If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed:
+ *  110x   1   1   1	r/o	r/o
+ *  11x0   1   1   1	r/o	r/o
  */
 	.macro	armv6_mt_table pfx
 \pfx\()_mt_table:
@@ -138,8 +142,11 @@
 
 	tst	r1, #L_PTE_USER
 	orrne	r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+	@ allow kernel read/write access to read-only user pages
 	tstne	r3, #PTE_EXT_APX
 	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
 
 	tst	r1, #L_PTE_EXEC
 	orreq	r3, r3, #PTE_EXT_XN

arch/arm/mm/proc-v7.S

@@ -148,8 +148,11 @@ ENTRY(cpu_v7_set_pte_ext)
 
 	tst	r1, #L_PTE_USER
 	orrne	r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+	@ allow kernel read/write access to read-only user pages
 	tstne	r3, #PTE_EXT_APX
 	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
 
 	tst	r1, #L_PTE_EXEC
 	orreq	r3, r3, #PTE_EXT_XN
@@ -273,8 +276,6 @@ __v7_setup:
 	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
 	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
-	mov	r10, #0x1f			@ domains 0, 1 = manager
-	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
 	/*
 	 * Memory region attributes with SCTLR.TRE=1
 	 *