ARM: S3C24XX: move common clock init into common.c

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s3c24xx/common.c

@@ -41,6 +41,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
 
@@ -52,6 +53,8 @@
 #include <plat/s3c2416.h>
 #include <plat/s3c244x.h>
 #include <plat/s3c2443.h>
+#include <plat/cpu-freq.h>
+#include <plat/pll.h>
 
 /* table of supported CPUs */
 
@@ -307,3 +310,18 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
 	},
 };
+
+/* initialise all the clocks */
+
+void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
+					   unsigned long hclk,
+					   unsigned long pclk)
+{
+	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
+					clk_xtal.rate);
+
+	clk_mpll.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_f.rate = fclk;
+}

arch/arm/plat-s3c24xx/Makefile

@@ -13,7 +13,6 @@ obj-				:=
 # Core files
 
 obj-y				+= irq.o
-obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
 obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o

arch/arm/plat-s3c24xx/clock.c

-/* linux/arch/arm/plat-s3c24xx/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-
-/* initialise all the clocks */
-
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
-					   unsigned long hclk,
-					   unsigned long pclk)
-{
-	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
-					clk_xtal.rate);
-
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-}