libata: update atapi disable handling

Global and per-LLD ATAPI disable checks were done in the command issue
path probably because it was left out during EH conversion.  On
affected machines, this can cause lots of warning messages.  Move them
to where they belong - the probing path.

Reported by Chunbo Luo.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chunbo Luo <chunbo.luo@windriver.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/ata/libata-core.c

@@ -120,7 +120,7 @@ static char ata_force_param_buf[PAGE_SIZE] __initdata;
 module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
 MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
 
-int atapi_enabled = 1;
+static int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
 
@@ -2142,6 +2142,16 @@ int ata_dev_configure(struct ata_device *dev)
 		return 0;
 	}
 
+	if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
+	    dev->class == ATA_DEV_ATAPI) {
+		ata_dev_printk(dev, KERN_WARNING,
+			"WARNING: ATAPI is %s, device ignored.\n",
+			atapi_enabled ? "not supported with this driver"
+				      : "disabled");
+		ata_dev_disable(dev);
+		return 0;
+	}
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)

drivers/ata/libata-scsi.c

@@ -2550,36 +2550,6 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
 	return ata_find_dev(ap, devno);
 }
 
-/**
- *	ata_scsi_dev_enabled - determine if device is enabled
- *	@dev: ATA device
- *
- *	Determine if commands should be sent to the specified device.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	0 if commands are not allowed / 1 if commands are allowed
- */
-
-static int ata_scsi_dev_enabled(struct ata_device *dev)
-{
-	if (unlikely(!ata_dev_enabled(dev)))
-		return 0;
-
-	if (!atapi_enabled || (dev->link->ap->flags & ATA_FLAG_NO_ATAPI)) {
-		if (unlikely(dev->class == ATA_DEV_ATAPI)) {
-			ata_dev_printk(dev, KERN_WARNING,
-				       "WARNING: ATAPI is %s, device ignored.\n",
-				       atapi_enabled ? "not supported with this driver" : "disabled");
-			return 0;
-		}
-	}
-
-	return 1;
-}
-
 /**
  *	ata_scsi_find_dev - lookup ata_device from scsi_cmnd
  *	@ap: ATA port to which the device is attached
@@ -2601,7 +2571,7 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
 {
 	struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev);
 
-	if (unlikely(!dev || !ata_scsi_dev_enabled(dev)))
+	if (unlikely(!dev || !ata_dev_enabled(dev)))
 		return NULL;
 
 	return dev;
@@ -3622,7 +3592,7 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
 
 	ata_scsi_dump_cdb(ap, cmd);
 
-	if (likely(ata_scsi_dev_enabled(ap->link.device)))
+	if (likely(ata_dev_enabled(ap->link.device)))
 		rc = __ata_scsi_queuecmd(cmd, done, ap->link.device);
 	else {
 		cmd->result = (DID_BAD_TARGET << 16);

drivers/ata/libata.h

@@ -66,7 +66,6 @@ enum {
 
 extern unsigned int ata_print_id;
 extern struct workqueue_struct *ata_aux_wq;
-extern int atapi_enabled;
 extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;