Commit 248f0f8b authored by Tobias Lorenz's avatar Tobias Lorenz Committed by Jeff Garzik

[libata sata_promise] s/sata/ata/

100% cosmetic:  rename various symbols with 'sata' in them to 'ata',
in preparation for addition of support for a PATA controller.
Signed-off-by: default avatarTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
parent 680d3c72
......@@ -73,7 +73,7 @@ struct pdc_port_priv {
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
static void pdc_eng_timeout(struct ata_port *ap);
static int pdc_port_start(struct ata_port *ap);
......@@ -85,7 +85,7 @@ static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
static void pdc_irq_clear(struct ata_port *ap);
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
static Scsi_Host_Template pdc_sata_sht = {
static Scsi_Host_Template pdc_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
......@@ -104,7 +104,7 @@ static Scsi_Host_Template pdc_sata_sht = {
.bios_param = ata_std_bios_param,
};
static struct ata_port_operations pdc_sata_ops = {
static struct ata_port_operations pdc_ata_ops = {
.port_disable = ata_port_disable,
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
......@@ -126,28 +126,28 @@ static struct ata_port_operations pdc_sata_ops = {
static struct ata_port_info pdc_port_info[] = {
/* board_2037x */
{
.sht = &pdc_sata_sht,
.sht = &pdc_ata_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_sata_ops,
.port_ops = &pdc_ata_ops,
},
/* board_20319 */
{
.sht = &pdc_sata_sht,
.sht = &pdc_ata_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_sata_ops,
.port_ops = &pdc_ata_ops,
},
};
static struct pci_device_id pdc_sata_pci_tbl[] = {
static struct pci_device_id pdc_ata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
......@@ -164,10 +164,10 @@ static struct pci_device_id pdc_sata_pci_tbl[] = {
};
static struct pci_driver pdc_sata_pci_driver = {
static struct pci_driver pdc_ata_pci_driver = {
.name = DRV_NAME,
.id_table = pdc_sata_pci_tbl,
.probe = pdc_sata_init_one,
.id_table = pdc_ata_pci_tbl,
.probe = pdc_ata_init_one,
.remove = ata_pci_remove_one,
};
......@@ -481,7 +481,7 @@ static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
}
static void pdc_sata_setup_port(struct ata_ioports *port, unsigned long base)
static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base)
{
port->cmd_addr = base;
port->data_addr = base;
......@@ -539,7 +539,7 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
writel(tmp, mmio + PDC_SLEW_CTL);
}
static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
......@@ -599,8 +599,8 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
probe_ent->irq_flags = SA_SHIRQ;
probe_ent->mmio_base = mmio_base;
pdc_sata_setup_port(&probe_ent->port[0], base + 0x200);
pdc_sata_setup_port(&probe_ent->port[1], base + 0x280);
pdc_ata_setup_port(&probe_ent->port[0], base + 0x200);
pdc_ata_setup_port(&probe_ent->port[1], base + 0x280);
probe_ent->port[0].scr_addr = base + 0x400;
probe_ent->port[1].scr_addr = base + 0x500;
......@@ -610,8 +610,8 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
case board_20319:
probe_ent->n_ports = 4;
pdc_sata_setup_port(&probe_ent->port[2], base + 0x300);
pdc_sata_setup_port(&probe_ent->port[3], base + 0x380);
pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
probe_ent->port[2].scr_addr = base + 0x600;
probe_ent->port[3].scr_addr = base + 0x700;
......@@ -645,22 +645,22 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
}
static int __init pdc_sata_init(void)
static int __init pdc_ata_init(void)
{
return pci_module_init(&pdc_sata_pci_driver);
return pci_module_init(&pdc_ata_pci_driver);
}
static void __exit pdc_sata_exit(void)
static void __exit pdc_ata_exit(void)
{
pci_unregister_driver(&pdc_sata_pci_driver);
pci_unregister_driver(&pdc_ata_pci_driver);
}
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Promise SATA TX2/TX4 low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, pdc_sata_pci_tbl);
MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl);
module_init(pdc_sata_init);
module_exit(pdc_sata_exit);
module_init(pdc_ata_init);
module_exit(pdc_ata_exit);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment