Commit 24ced062 authored by Holger Schurig's avatar Holger Schurig Committed by Greg Kroah-Hartman

usbtouchscreen: add support for DMC TSC-10/25 devices

Adds support for the DMC TSC-10 and TSC-25 usb touchscreen controllers.
Signed-off-by: default avatarHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: default avatarDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 9ce8540c
......@@ -221,6 +221,7 @@ config USB_TOUCHSCREEN
- ITM
- some other eTurboTouch
- Gunze AHL61
- DMC TSC-10/25
Have a look at <http://linux.chapter7.ch/touchkit/> for
a usage description and the required user-space stuff.
......@@ -258,6 +259,11 @@ config USB_TOUCHSCREEN_GUNZE
bool "Gunze AHL61 device support" if EMBEDDED
depends on USB_TOUCHSCREEN
config USB_TOUCHSCREEN_DMC_TSC10
default y
bool "DMC TSC-10/25 device support" if EMBEDDED
depends on USB_TOUCHSCREEN
config USB_YEALINK
tristate "Yealink usb-p1k voip phone"
depends on USB && INPUT && EXPERIMENTAL
......
......@@ -8,6 +8,7 @@
* - PanJit TouchSet
* - eTurboTouch
* - Gunze AHL61
* - DMC TSC-10/25
*
* Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
......@@ -30,6 +31,8 @@
* - ITM parts are from itmtouch.c
* - 3M parts are from mtouchusb.c
* - PanJit parts are from an unmerged driver by Lanslott Gish
* - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
* driver from Marius Vollmer
*
*****************************************************************************/
......@@ -44,7 +47,7 @@
#include <linux/usb/input.h>
#define DRIVER_VERSION "v0.4"
#define DRIVER_VERSION "v0.5"
#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
#define DRIVER_DESC "USB Touchscreen Driver"
......@@ -103,6 +106,7 @@ enum {
DEVTYPE_ITM,
DEVTYPE_ETURBO,
DEVTYPE_GUNZE,
DEVTYPE_DMC_TSC10,
};
static struct usb_device_id usbtouch_devices[] = {
......@@ -139,6 +143,10 @@ static struct usb_device_id usbtouch_devices[] = {
{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
#endif
{}
};
......@@ -312,6 +320,80 @@ static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *
}
#endif
/*****************************************************************************
* DMC TSC-10/25 Part
*
* Documentation about the controller and it's protocol can be found at
* http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
* http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
*/
#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
/* supported data rates. currently using 130 */
#define TSC10_RATE_POINT 0x50
#define TSC10_RATE_30 0x40
#define TSC10_RATE_50 0x41
#define TSC10_RATE_80 0x42
#define TSC10_RATE_100 0x43
#define TSC10_RATE_130 0x44
#define TSC10_RATE_150 0x45
/* commands */
#define TSC10_CMD_RESET 0x55
#define TSC10_CMD_RATE 0x05
#define TSC10_CMD_DATA1 0x01
static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
{
struct usb_device *dev = usbtouch->udev;
int ret;
unsigned char buf[2];
/* reset */
buf[0] = buf[1] = 0xFF;
ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
TSC10_CMD_RESET,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
if (ret < 0)
return ret;
if (buf[0] != 0x06 || buf[1] != 0x00)
return -ENODEV;
/* set coordinate output rate */
buf[0] = buf[1] = 0xFF;
ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
TSC10_CMD_RATE,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
if (ret < 0)
return ret;
if (buf[0] != 0x06 || buf[1] != 0x00)
return -ENODEV;
/* start sending data */
ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
TSC10_CMD_DATA1,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
if (ret < 0)
return ret;
return 0;
}
static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
{
*x = ((pkt[2] & 0x03) << 8) | pkt[1];
*y = ((pkt[4] & 0x03) << 8) | pkt[3];
*touch = pkt[0] & 0x01;
return 1;
}
#endif
/*****************************************************************************
* the different device descriptors
*/
......@@ -389,6 +471,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
.read_data = gunze_read_data,
},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
[DEVTYPE_DMC_TSC10] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 5,
.init = dmc_tsc10_init,
.read_data = dmc_tsc10_read_data,
},
#endif
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment