media: i2c: Add driver for onsemi MT9M114 camera sensor

The MT9M114 is a CMOS camera sensor that combines a 1296x976 pixel array
with a 10-bit dynamic range together with an internal ISP. The driver
exposes two subdevs, one for the pixel array and one for the ISP (named
IFP for Image Flow Processor). Major supported features are

- Full configuration of analog crop and binning in the pixel array
- Full configuration of scaling in the ISP
- Automatic exposure and white balance
- Manual exposure and analog gain
- Horizontal and vertical flip
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

MAINTAINERS

@@ -14564,6 +14564,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
+F:	drivers/media/i2c/mt9m114.c
 
 MT9P031 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drivers/media/i2c/Kconfig

@@ -215,6 +215,16 @@ config VIDEO_MT9M111
 	  This driver supports MT9M111, MT9M112 and MT9M131 cameras from
 	  Micron/Aptina
 
+config VIDEO_MT9M114
+	tristate "onsemi MT9M114 sensor support"
+	select V4L2_CCI_I2C
+	help
+	  This is a Video4Linux2 sensor-level driver for the onsemi MT9M114
+	  camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mt9m114.
+
 config VIDEO_MT9P031
 	tristate "Aptina MT9P031 support"
 	select VIDEO_APTINA_PLL

drivers/media/i2c/Makefile

@@ -65,6 +65,7 @@ obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
 obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
 obj-$(CONFIG_VIDEO_MT9M001) += mt9m001.o
 obj-$(CONFIG_VIDEO_MT9M111) += mt9m111.o
+obj-$(CONFIG_VIDEO_MT9M114) += mt9m114.o
 obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o
 obj-$(CONFIG_VIDEO_MT9T112) += mt9t112.o
 obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o