Merge tag 'at91-fixes' of...

Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes

Fixes for 4.14:
- three DT fixes for the newly introduced sama5d27_som1_ek board
- one treewide modification that didn't touch this new PM code: we
  synchronize now to be coherent with the other ARM platforms

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91: Replace uses of virt_to_phys with __pa_symbol
  ARM: dts: at91: sama5d27_som1_ek: fix USB host vbus
  ARM: dts: at91: sama5d27_som1_ek: fix typos
  ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USB
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts

@@ -67,7 +67,10 @@ usb0: gadget@00300000 {
 
 		usb1: ohci@00400000 {
 			num-ports = <3>;
-			atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
@@ -120,7 +123,7 @@ uart2: serial@f8024000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
 				atmel,use-dma-rx;
-				atmel-use-dma-tx;
+				atmel,use-dma-tx;
 				status = "okay";
 			};
 
@@ -178,7 +181,7 @@ uart3: serial@fc008000 {
 			uart4: serial@fc00c000 {
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
-				pinctrl-name = "default";
+				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
 				status = "okay";
 			};
@@ -330,7 +333,7 @@ pinctrl_key_gpio_default: key_gpio_default {
 				};
 
 				pinctrl_led_gpio_default: led_gpio_default {
-					pinmux = <PIN_PA27__GPIO>,
+					pinmux = <PIN_PA10__GPIO>,
 						 <PIN_PB1__GPIO>,
 						 <PIN_PA31__GPIO>;
 					bias-pull-up;
@@ -396,7 +399,7 @@ pinctrl_uart3_default: uart3_default {
 				};
 
 				pinctrl_usb_default: usb_default {
-					pinmux = <PIN_PA10__GPIO>,
+					pinmux = <PIN_PA27__GPIO>,
 						 <PIN_PD19__GPIO>;
 					bias-disable;
 				};
@@ -520,17 +523,17 @@ leds {
 
 		red {
 			label = "red";
-			gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
 		};
 
 		green {
 			label = "green";
-			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
 		blue {
 			label = "blue";
-			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

arch/arm/mach-at91/pm.c

@@ -533,8 +533,8 @@ static void __init at91_pm_backup_init(void)
 	}
 
 	pm_bu->suspended = 0;
-	pm_bu->canary = virt_to_phys(&canary);
-	pm_bu->resume = virt_to_phys(cpu_resume);
+	pm_bu->canary = __pa_symbol(&canary);
+	pm_bu->resume = __pa_symbol(cpu_resume);
 
 	return;