Commit 24f668de authored by Laxman Dewangan's avatar Laxman Dewangan Committed by Stephen Boyd

clk: Combine DT binding doc for max77686 and max77802

The clock IP used on the Maxim PMICs max77686 and max77802 are
same. The configuration of clock register is also same except
the number of clocks.

Define the common DT binding file for the clocks of Maxim PMICs
MAX77686 and MAX77802. For this, remove the separate DT binding
document file for maxim,max77802 and move all information to
maxim,max77686 DT binding document.
Signed-off-by: default avatarLaxman Dewangan <ldewangan@nvidia.com>
CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
CC: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Reviewed-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 8ad313fe
Binding for Maxim MAX77686 32k clock generator block Binding for Maxim MAX77686/MAX77802 32k clock generator block
This is a part of device tree bindings of MAX77686 multi-function device. This is a part of device tree bindings of MAX77686/MAX77802 multi-function
More information can be found in bindings/mfd/max77686.txt file. device. More information can be found in bindings/mfd/max77686.txt file for
MAX77686 and bindings/mfd/max77802.txt for MAX77802.
The MAX77686 contains three 32.768khz clock outputs that can be controlled The MAX77686 contains three 32.768khz clock outputs that can be controlled
(gated/ungated) over I2C. (gated/ungated) over I2C.
The MAX77802 contains two 32.768khz clock outputs that can be controlled
(gated/ungated) over I2C.
Following properties should be presend in main device node of the MFD chip. Following properties should be presend in main device node of the MFD chip.
Required properties: Required properties:
...@@ -17,30 +21,62 @@ Optional properties: ...@@ -17,30 +21,62 @@ Optional properties:
Each clock is assigned an identifier and client nodes can use this identifier Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. Following indices are allowed: to specify the clock which they consume. Following indices are allowed:
- 0: 32khz_ap clock, - 0: 32khz_ap clock (max77686, max77802),
- 1: 32khz_cp clock, - 1: 32khz_cp clock (max77686, max77802),
- 2: 32khz_pmic clock. - 2: 32khz_pmic clock (max77686).
Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h
header and can be used in device tree sources. header for MAX77686 and dt-bindings/clock/maxim,max77802.h for MAX77802 and can
be used in device tree sources.
Example:
1. With MAX77686:
#include <dt-bindings/clock/maxim,max77686.h>
/* ... */
Node of the MFD chip
max77686: max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&wakeup_eint>;
interrupts = <26 0>;
reg = <0x09>;
#clock-cells = <1>;
/* ... */
};
Clock consumer node
foo@0 {
compatible = "bar,foo";
/* ... */
clock-names = "my-clock";
clocks = <&max77686 MAX77686_CLK_PMIC>;
};
2. With MAX77802:
Example: Node of the MFD chip #include <dt-bindings/clock/maxim,max77802.h>
/* ... */
max77686: max77686@09 { Node of the MFD chip
compatible = "maxim,max77686"; max77802: max77802@09 {
interrupt-parent = <&wakeup_eint>; compatible = "maxim,max77802";
interrupts = <26 0>; interrupt-parent = <&wakeup_eint>;
reg = <0x09>; interrupts = <26 0>;
#clock-cells = <1>; reg = <0x09>;
#clock-cells = <1>;
/* ... */ /* ... */
}; };
Example: Clock consumer node Clock consumer node
foo@0 { foo@0 {
compatible = "bar,foo"; compatible = "bar,foo";
/* ... */ /* ... */
clock-names = "my-clock"; clock-names = "my-clock";
clocks = <&max77686 MAX77686_CLK_PMIC>; clocks = <&max77802 MAX77802_CLK_32K_AP>;
}; };
Binding for Maxim MAX77802 32k clock generator block
This is a part of device tree bindings of MAX77802 multi-function device.
More information can be found in bindings/mfd/max77802.txt file.
The MAX77802 contains two 32.768khz clock outputs that can be controlled
(gated/ungated) over I2C.
Following properties should be present in main device node of the MFD chip.
Required properties:
- #clock-cells: From common clock binding; shall be set to 1.
Optional properties:
- clock-output-names: From common clock binding.
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. Following indices are allowed:
- 0: 32khz_ap clock,
- 1: 32khz_cp clock.
Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77802.h
header and can be used in device tree sources.
Example: Node of the MFD chip
max77802: max77802@09 {
compatible = "maxim,max77802";
interrupt-parent = <&wakeup_eint>;
interrupts = <26 0>;
reg = <0x09>;
#clock-cells = <1>;
/* ... */
};
Example: Clock consumer node
foo@0 {
compatible = "bar,foo";
/* ... */
clock-names = "my-clock";
clocks = <&max77802 MAX77802_CLK_32K_AP>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment