Skip to content

L
linux
Commit 250d375d authored by Russell King's avatar Russell King Committed by Russell King
Browse files
Options

Merge nommu branch

parents 84904d0e 6afd6fae
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2123 additions and 408 deletions
arch/arm/Kconfig
View file @ 250d375d
......@@ -99,7 +99,7 @@ config ARCH_MTD_XIP
config VECTORS_BASE
hex
default 0xffff0000 if MMU
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
default DRAM_BASE if REMAP_VECTORS_TO_RAM
default 0x00000000
help
......@@ -626,6 +626,7 @@ config LEDS_CPU
config ALIGNMENT_TRAP
bool
depends on CPU_CP15_MMU
default y if !ARCH_EBSA110
help
ARM processors can not fetch/store information which is not
......@@ -857,7 +858,7 @@ source "drivers/base/Kconfig"
source "drivers/connector/Kconfig"
if ALIGNMENT_TRAP
if ALIGNMENT_TRAP || !CPU_CP15_MMU
source "drivers/mtd/Kconfig"
endif
......
arch/arm/Kconfig-nommu
View file @ 250d375d
......@@ -25,6 +25,14 @@ config FLASH_SIZE
hex 'FLASH Size' if SET_MEM_PARAM
default 0x00400000
config PROCESSOR_ID
hex
default 0x00007700
depends on !CPU_CP15
help
If processor has no CP15 register, this processor ID is
used instead of the auto-probing which utilizes the register.
config REMAP_VECTORS_TO_RAM
bool 'Install vectors to the begining of RAM' if DRAM_BASE
depends on DRAM_BASE
......
arch/arm/Makefile
View file @ 250d375d
......@@ -55,7 +55,12 @@ arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
# This selects how we optimise for the processor.
tune-$(CONFIG_CPU_ARM610) :=-mtune=arm610
tune-$(CONFIG_CPU_ARM710) :=-mtune=arm710
tune-$(CONFIG_CPU_ARM7TDMI) :=-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM946T) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi
......
arch/arm/boot/compressed/Makefile
View file @ 250d375d
......@@ -51,7 +51,11 @@ OBJS += head-at91rm9200.o
endif
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
ifeq ($(CONFIG_CPU_CP15),y)
OBJS += big-endian.o
else
# The endian should be set by h/w design.
endif
endif
#
......
arch/arm/boot/compressed/head.S
View file @ 250d375d
......@@ -82,9 +82,11 @@
kphex r6, 8 /* processor id */
kputc #':'
kphex r7, 8 /* architecture id */
#ifdef CONFIG_CPU_CP15
kputc #':'
mrc p15, 0, r0, c1, c0
kphex r0, 8 /* control reg */
#endif
kputc #'\n'
kphex r5, 8 /* decompressed kernel start */
kputc #'-'
......@@ -507,7 +509,11 @@ call_kernel: bl cache_clean_flush
*/
call_cache_fn: adr r12, proc_types
#ifdef CONFIG_CPU_CP15
mrc p15, 0, r6, c0, c0 @ get processor ID
#else
ldr r6, =CONFIG_PROCESSOR_ID
#endif
1: ldr r1, [r12, #0] @ get value
ldr r2, [r12, #4] @ get mask
eor r1, r1, r6 @ (real ^ match)
......
arch/arm/kernel/head-nommu.S
View file @ 250d375d
......@@ -9,7 +9,6 @@
* published by the Free Software Foundation.
*
* Common kernel startup code (non-paged MM)
* for 32-bit CPUs which has a process ID register(CP15).
*
*/
#include <linux/linkage.h>
......@@ -40,7 +39,11 @@
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
#ifndef CONFIG_CPU_CP15
ldr r9, =CONFIG_PROCESSOR_ID
#else
mrc p15, 0, r9, c0, c0 @ get processor id
#endif
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
beq __error_p @ yes, error 'p'
......@@ -58,6 +61,7 @@ ENTRY(stext)
*/
.type __after_proc_init, %function
__after_proc_init:
#ifdef CONFIG_CPU_CP15
mrc p15, 0, r0, c1, c0, 0 @ read control reg
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
......@@ -72,8 +76,14 @@ __after_proc_init:
#endif
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
#ifdef CONFIG_CPU_HIGH_VECTOR
orr r0, r0, #CR_V
#else
bic r0, r0, #CR_V
#endif
mcr p15, 0, r0, c1, c0, 0 @ write control reg
#endif /* CONFIG_CPU_CP15 */
mov pc, r13 @ clear the BSS and jump
@ to start_kernel
......
arch/arm/kernel/module.c
View file @ 250d375d
......@@ -2,6 +2,7 @@
* linux/arch/arm/kernel/module.c
*
* Copyright (C) 2002 Russell King.
* Modified for nommu by Hyok S. Choi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -32,6 +33,7 @@ extern void _etext;
#define MODULE_START (((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK)
#endif
#ifdef CONFIG_MMU
void *module_alloc(unsigned long size)
{
struct vm_struct *area;
......@@ -46,6 +48,12 @@ void *module_alloc(unsigned long size)
return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
}
#else /* CONFIG_MMU */
void *module_alloc(unsigned long size)
{
return size == 0 ? NULL : vmalloc(size);
}
#endif /* !CONFIG_MMU */
void module_free(struct module *module, void *region)
{
......
arch/arm/kernel/process.c
View file @ 250d375d
......@@ -221,16 +221,26 @@ void __show_regs(struct pt_regs *regs)
processor_modes[processor_mode(regs)],
thumb_mode(regs) ? " (T)" : "",
get_fs() == get_ds() ? "kernel" : "user");
#if CONFIG_CPU_CP15
{
unsigned int ctrl, transbase, dac;
unsigned int ctrl;
__asm__ (
" mrc p15, 0, %0, c1, c0\n"
" mrc p15, 0, %1, c2, c0\n"
" mrc p15, 0, %2, c3, c0\n"
: "=r" (ctrl), "=r" (transbase), "=r" (dac));
printk("Control: %04X Table: %08X DAC: %08X\n",
ctrl, transbase, dac);
: "=r" (ctrl));
printk("Control: %04X\n", ctrl);
}
#ifdef CONFIG_CPU_CP15_MMU
{
unsigned int transbase, dac;
__asm__ (
" mrc p15, 0, %0, c2, c0\n"
" mrc p15, 0, %1, c3, c0\n"
: "=r" (transbase), "=r" (dac));
printk("Table: %08X DAC: %08X\n",
transbase, dac);
}
#endif
#endif
}
void show_regs(struct pt_regs * regs)
......
arch/arm/mm/Kconfig
View file @ 250d375d
......@@ -15,6 +15,7 @@ config CPU_ARM610
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
help
......@@ -24,6 +25,20 @@ config CPU_ARM610
Say Y if you want support for the ARM610 processor.
Otherwise, say N.
# ARM7TDMI
config CPU_ARM7TDMI
bool "Support ARM7TDMI processor"
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_CACHE_V4
help
A 32-bit RISC microprocessor based on the ARM7 processor core
which has no memory control unit and cache.
Say Y if you want support for the ARM7TDMI processor.
Otherwise, say N.
# ARM710
config CPU_ARM710
bool "Support ARM710 processor" if !ARCH_CLPS7500 && ARCH_RPC
......@@ -31,6 +46,7 @@ config CPU_ARM710
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
help
......@@ -50,6 +66,7 @@ config CPU_ARM720T
select CPU_ABRT_LV4T
select CPU_CACHE_V4
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WT if MMU
select CPU_TLB_V4WT if MMU
help
......@@ -59,6 +76,36 @@ config CPU_ARM720T
Say Y if you want support for the ARM720T processor.
Otherwise, say N.
# ARM740T
config CPU_ARM740T
bool "Support ARM740T processor" if ARCH_INTEGRATOR
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_CACHE_V3 # although the core is v4t
select CPU_CP15_MPU
help
A 32-bit RISC processor with 8KB cache or 4KB variants,
write buffer and MPU(Protection Unit) built around
an ARM7TDMI core.
Say Y if you want support for the ARM740T processor.
Otherwise, say N.
# ARM9TDMI
config CPU_ARM9TDMI
bool "Support ARM9TDMI processor"
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
select CPU_CACHE_V4
help
A 32-bit RISC microprocessor based on the ARM9 processor core
which has no memory control unit and cache.
Say Y if you want support for the ARM9TDMI processor.
Otherwise, say N.
# ARM920T
config CPU_ARM920T
bool "Support ARM920T processor"
......@@ -68,6 +115,7 @@ config CPU_ARM920T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
......@@ -89,6 +137,7 @@ config CPU_ARM922T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
......@@ -108,6 +157,7 @@ config CPU_ARM925T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
......@@ -126,6 +176,7 @@ config CPU_ARM926T
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
......@@ -136,6 +187,39 @@ config CPU_ARM926T
Say Y if you want support for the ARM926T processor.
Otherwise, say N.
# ARM940T
config CPU_ARM940T
bool "Support ARM940T processor" if ARCH_INTEGRATOR
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
select CPU_CACHE_VIVT
select CPU_CP15_MPU
help
ARM940T is a member of the ARM9TDMI family of general-
purpose microprocessors with MPU and seperate 4KB
instruction and 4KB data cases, each with a 4-word line
length.
Say Y if you want support for the ARM940T processor.
Otherwise, say N.
# ARM946E-S
config CPU_ARM946E
bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
depends on !MMU
select CPU_32v5
select CPU_ABRT_NOMMU
select CPU_CACHE_VIVT
select CPU_CP15_MPU
help
ARM946E-S is a member of the ARM9E-S family of high-
performance, 32-bit system-on-chip processor solutions.
The TCM and ARMv5TE 32-bit instruction set is supported.
Say Y if you want support for the ARM946E-S processor.
Otherwise, say N.
# ARM1020 - needs validating
config CPU_ARM1020
bool "Support ARM1020T (rev 0) processor"
......@@ -144,6 +228,7 @@ config CPU_ARM1020
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
......@@ -161,6 +246,7 @@ config CPU_ARM1020E
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
depends on n
......@@ -172,6 +258,7 @@ config CPU_ARM1022
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_TLB_V4WBI if MMU
help
......@@ -189,6 +276,7 @@ config CPU_ARM1026
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_TLB_V4WBI if MMU
help
......@@ -207,6 +295,7 @@ config CPU_SA110
select CPU_ABRT_EV4
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WB if MMU
help
......@@ -227,6 +316,7 @@ config CPU_SA1100
select CPU_ABRT_EV4
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WB if MMU
# XScale
......@@ -237,6 +327,7 @@ config CPU_XSCALE
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
# XScale Core Version 3
......@@ -247,6 +338,7 @@ config CPU_XSC3
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
select IO_36
......@@ -258,6 +350,7 @@ config CPU_V6
select CPU_ABRT_EV6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
select CPU_CP15_MMU
select CPU_COPY_V6 if MMU
select CPU_TLB_V6 if MMU
......@@ -299,6 +392,9 @@ config CPU_32v6
bool
# The abort model
config CPU_ABRT_NOMMU
bool
config CPU_ABRT_EV4
bool
......@@ -380,6 +476,23 @@ config CPU_TLB_V6
endif
config CPU_CP15
bool
help
Processor has the CP15 register.
config CPU_CP15_MMU
bool
select CPU_CP15
help
Processor has the CP15 register, which has MMU related registers.
config CPU_CP15_MPU
bool
select CPU_CP15
help
Processor has the CP15 register, which has MPU related registers.
#
# CPU supports 36-bit I/O
#
......@@ -390,7 +503,7 @@ comment "Processor Features"
config ARM_THUMB
bool "Support Thumb user binaries"
depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6
depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6
default y
help
Say Y if you want to include kernel support for running user space
......@@ -411,23 +524,48 @@ config CPU_BIG_ENDIAN
port must properly enable any big-endian related features
of your chipset/board/processor.
config CPU_HIGH_VECTOR
depends !MMU && CPU_CP15 && !CPU_ARM740T
bool "Select the High exception vector"
default n
help
Say Y here to select high exception vector(0xFFFF0000~).
The exception vector can be vary depending on the platform
design in nommu mode. If your platform needs to select
high exception vector, say Y.
Otherwise or if you are unsure, say N, and the low exception
vector (0x00000000~) will be used.
config CPU_ICACHE_DISABLE
bool "Disable I-Cache"
depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
bool "Disable I-Cache (I-bit)"
depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
help
Say Y here to disable the processor instruction cache. Unless
you have a reason not to or are unsure, say N.
config CPU_DCACHE_DISABLE
bool "Disable D-Cache"
depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
bool "Disable D-Cache (C-bit)"
depends on CPU_CP15
help
Say Y here to disable the processor data cache. Unless
you have a reason not to or are unsure, say N.
config CPU_DCACHE_SIZE
hex
depends on CPU_ARM740T || CPU_ARM946E
default 0x00001000 if CPU_ARM740T
default 0x00002000 # default size for ARM946E-S
help
Some cores are synthesizable to have various sized cache. For
ARM946E-S case, it can vary from 0KB to 1MB.
To support such cache operations, it is efficient to know the size
before compile time.
If your SoC is configured to have a different size, define the value
here with proper conditions.
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you
......@@ -435,7 +573,7 @@ config CPU_DCACHE_WRITETHROUGH
config CPU_CACHE_ROUND_ROBIN
bool "Round robin I and D cache replacement algorithm"
depends on (CPU_ARM926T || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
help
Say Y here to use the predictable round-robin cache replacement
policy. Unless you specifically require this or are unsure, say N.
......
arch/arm/mm/Makefile
View file @ 250d375d
......@@ -6,7 +6,7 @@ obj-y := consistent.o extable.o fault.o init.o \
iomap.o
obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \
mm-armv.o
pgd.o mmu.o
ifneq ($(CONFIG_MMU),y)
obj-y += nommu.o
......@@ -17,6 +17,7 @@ obj-$(CONFIG_MODULES) += proc-syms.o
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o
obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o
obj-$(CONFIG_CPU_ABRT_EV4T) += abort-ev4t.o
obj-$(CONFIG_CPU_ABRT_LV4T) += abort-lv4t.o
......@@ -46,11 +47,16 @@ obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o
obj-$(CONFIG_CPU_ARM720T) += proc-arm720.o
obj-$(CONFIG_CPU_ARM740T) += proc-arm740.o
obj-$(CONFIG_CPU_ARM9TDMI) += proc-arm9tdmi.o
obj-$(CONFIG_CPU_ARM920T) += proc-arm920.o
obj-$(CONFIG_CPU_ARM922T) += proc-arm922.o
obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o
obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o
obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o
obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o
obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o
......
arch/arm/mm/abort-lv4t.S
View file @ 250d375d
......@@ -19,11 +19,16 @@
*/
ENTRY(v4t_late_abort)
tst r3, #PSR_T_BIT @ check for thumb mode
#ifdef CONFIG_CPU_CP15_MMU
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
#else
mov r0, #0 @ clear r0, r1 (no FSR/FAR)
mov r1, #0
#endif
bne .data_thumb_abort
ldr r8, [r2] @ read arm instruction
bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
tst r8, #1 << 20 @ L = 1 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #15 << 24
......
arch/arm/mm/abort-nommu.S 0 → 100644
View file @ 250d375d
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* Function: nommu_early_abort
*
* Params : r2 = address of aborted instruction
* : r3 = saved SPSR
*
* Returns : r0 = 0 (abort address)
* : r1 = 0 (FSR)
*
* Note: There is no FSR/FAR on !CPU_CP15_MMU cores.
* Just fill zero into the registers.
*/
.align 5
ENTRY(nommu_early_abort)
mov r0, #0 @ clear r0, r1 (no FSR/FAR)
mov r1, #0
mov pc, lr
arch/arm/mm/alignment.c
View file @ 250d375d
......@@ -735,7 +735,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
/*
* We got a fault - fix it up, or die.
*/
do_bad_area(current, current->mm, addr, fsr, regs);
do_bad_area(addr, fsr, regs);
return 0;
swp:
......
arch/arm/mm/cache-v4.S
View file @ 250d375d
......@@ -29,9 +29,13 @@ ENTRY(v4_flush_user_cache_all)
* Clean and invalidate the entire cache.
*/
ENTRY(v4_flush_kern_cache_all)
#ifdef CPU_CP15
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
mov pc, lr
#else
/* FALLTHROUGH */
#endif
/*
* flush_user_cache_range(start, end, flags)
......@@ -44,9 +48,13 @@ ENTRY(v4_flush_kern_cache_all)
* - flags - vma_area_struct flags describing address space
*/
ENTRY(v4_flush_user_cache_range)
#ifdef CPU_CP15
mov ip, #0
mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache
mov pc, lr
#else
/* FALLTHROUGH */
#endif
/*
* coherent_kern_range(start, end)
......@@ -108,8 +116,10 @@ ENTRY(v4_dma_inv_range)
* - end - virtual end address
*/
ENTRY(v4_dma_flush_range)
#ifdef CPU_CP15
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
#endif
/* FALLTHROUGH */
/*
......
arch/arm/mm/fault.c
View file @ 250d375d
......@@ -131,10 +131,11 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr,
force_sig_info(sig, &si, tsk);
}
void
do_bad_area(struct task_struct *tsk, struct mm_struct *mm, unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->active_mm;
/*
* If we are in kernel mode at this point, we
* have no context to handle this fault with.
......@@ -319,7 +320,6 @@ static int
do_translation_fault(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
struct task_struct *tsk;
unsigned int index;
pgd_t *pgd, *pgd_k;
pmd_t *pmd, *pmd_k;
......@@ -351,9 +351,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
return 0;
bad_area:
tsk = current;
do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
do_bad_area(addr, fsr, regs);
return 0;
}
......@@ -364,8 +362,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
static int
do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
struct task_struct *tsk = current;
do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
do_bad_area(addr, fsr, regs);
return 0;
}
......
arch/arm/mm/fault.h
View file @ 250d375d
void do_bad_area(struct task_struct *tsk, struct mm_struct *mm,
unsigned long addr, unsigned int fsr, struct pt_regs *regs);
void show_pte(struct mm_struct *mm, unsigned long addr);
void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
unsigned long search_exception_table(unsigned long addr);
arch/arm/mm/init.c
View file @ 250d375d
......@@ -27,10 +27,7 @@
#include "mm.h"
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end;
extern void _text, _etext, __data_start, _end, __init_begin, __init_end;
extern unsigned long phys_initrd_start;
extern unsigned long phys_initrd_size;
......@@ -40,17 +37,6 @@ extern unsigned long phys_initrd_size;
*/
static struct meminfo meminfo __initdata = { 0, };
/*
* empty_zero_page is a special page that is used for
* zero-initialized data and COW.
*/
struct page *empty_zero_page;
/*
* The pmd table for the upper-most set of pages.
*/
pmd_t *top_pmd;
void show_mem(void)
{
int free = 0, total = 0, reserved = 0;
......@@ -173,57 +159,18 @@ static int __init check_initrd(struct meminfo *mi)
return initrd_node;
}
/*
* Reserve the various regions of node 0
*/
static __init void reserve_node_zero(pg_data_t *pgdat)
static inline void map_memory_bank(struct membank *bank)
{
unsigned long res_size = 0;
/*
* Register the kernel text and data with bootmem.
* Note that this can only be in node 0.
*/
#ifdef CONFIG_XIP_KERNEL
reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
#else
reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
#endif
/*
* Reserve the page tables. These are already in use,
* and can only be in node 0.
*/
reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
PTRS_PER_PGD * sizeof(pgd_t));
#ifdef CONFIG_MMU
struct map_desc map;
/*
* Hmm... This should go elsewhere, but we really really need to
* stop things allocating the low memory; ideally we need a better
* implementation of GFP_DMA which does not assume that DMA-able
* memory starts at zero.
*/
if (machine_is_integrator() || machine_is_cintegrator())
res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
map.pfn = __phys_to_pfn(bank->start);
map.virtual = __phys_to_virt(bank->start);
map.length = bank->size;
map.type = MT_MEMORY;
/*
* These should likewise go elsewhere. They pre-reserve the
* screen memory region at the start of main system memory.
*/
if (machine_is_edb7211())
res_size = 0x00020000;
if (machine_is_p720t())
res_size = 0x00014000;
#ifdef CONFIG_SA1111
/*
* Because of the SA1111 DMA bug, we want to preserve our
* precious DMA-able memory...
*/
res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
create_mapping(&map);
#endif
if (res_size)
reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
}
static unsigned long __init
......@@ -242,23 +189,18 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
* Calculate the pfn range, and map the memory banks for this node.
*/
for_each_nodebank(i, mi, node) {
struct membank *bank = &mi->bank[i];
unsigned long start, end;
struct map_desc map;
start = mi->bank[i].start >> PAGE_SHIFT;
end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
start = bank->start >> PAGE_SHIFT;
end = (bank->start + bank->size) >> PAGE_SHIFT;
if (start_pfn > start)
start_pfn = start;
if (end_pfn < end)
end_pfn = end;
map.pfn = __phys_to_pfn(mi->bank[i].start);
map.virtual = __phys_to_virt(mi->bank[i].start);
map.length = mi->bank[i].size;
map.type = MT_MEMORY;
create_mapping(&map);
map_memory_bank(bank);
}
/*
......@@ -340,9 +282,9 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
return end_pfn;
}
static void __init bootmem_init(struct meminfo *mi)
void __init bootmem_init(struct meminfo *mi)
{
unsigned long addr, memend_pfn = 0;
unsigned long memend_pfn = 0;
int node, initrd_node, i;
/*
......@@ -354,26 +296,6 @@ static void __init bootmem_init(struct meminfo *mi)
memcpy(&meminfo, mi, sizeof(meminfo));
/*
* Clear out all the mappings below the kernel image.
*/
for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
#ifdef CONFIG_XIP_KERNEL
/* The XIP kernel is mapped in the module area -- skip over it */
addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
#endif
for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
/*
* Clear out all the kernel space mappings, except for the first
* memory bank, up to the end of the vmalloc region.
*/
for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
addr < VMALLOC_END; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
/*
* Locate which node contains the ramdisk image, if any.
*/
......@@ -407,114 +329,6 @@ static void __init bootmem_init(struct meminfo *mi)
max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
}
/*
* Set up device the mappings. Since we clear out the page tables for all
* mappings above VMALLOC_END, we will remove any debug device mappings.
* This means you have to be careful how you debug this function, or any
* called function. This means you can't use any function or debugging
* method which may touch any device, otherwise the kernel _will_ crash.
*/
static void __init devicemaps_init(struct machine_desc *mdesc)
{
struct map_desc map;
unsigned long addr;
void *vectors;
/*
* Allocate the vector page early.
*/
vectors = alloc_bootmem_low_pages(PAGE_SIZE);
BUG_ON(!vectors);
for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
/*
* Map the kernel if it is XIP.
* It is always first in the modulearea.
*/
#ifdef CONFIG_XIP_KERNEL
map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
map.virtual = MODULE_START;
map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
map.type = MT_ROM;
create_mapping(&map);
#endif
/*
* Map the cache flushing regions.
*/
#ifdef FLUSH_BASE
map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
map.virtual = FLUSH_BASE;
map.length = SZ_1M;
map.type = MT_CACHECLEAN;
create_mapping(&map);
#endif
#ifdef FLUSH_BASE_MINICACHE
map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
map.virtual = FLUSH_BASE_MINICACHE;
map.length = SZ_1M;
map.type = MT_MINICLEAN;
create_mapping(&map);
#endif
/*
* Create a mapping for the machine vectors at the high-vectors
* location (0xffff0000). If we aren't using high-vectors, also
* create a mapping at the low-vectors virtual address.
*/
map.pfn = __phys_to_pfn(virt_to_phys(vectors));
map.virtual = 0xffff0000;
map.length = PAGE_SIZE;
map.type = MT_HIGH_VECTORS;
create_mapping(&map);
if (!vectors_high()) {
map.virtual = 0;
map.type = MT_LOW_VECTORS;
create_mapping(&map);
}
/*
* Ask the machine support to map in the statically mapped devices.
*/
if (mdesc->map_io)
mdesc->map_io();
/*
* Finally flush the caches and tlb to ensure that we're in a
* consistent state wrt the writebuffer. This also ensures that
* any write-allocated cache lines in the vector page are written
* back. After this point, we can start to touch devices again.
*/
local_flush_tlb_all();
flush_cache_all();
}
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
*/
void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
{
void *zero_page;
build_mem_type_table();
bootmem_init(mi);
devicemaps_init(mdesc);
top_pmd = pmd_off_k(0xffff0000);
/*
* allocate the zero page. Note that we count on this going ok.
*/
zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
memzero(zero_page, PAGE_SIZE);
empty_zero_page = virt_to_page(zero_page);
flush_dcache_page(empty_zero_page);
}
static inline void free_area(unsigned long addr, unsigned long end, char *s)
{
unsigned int size = (end - addr) >> 10;
......
arch/arm/mm/mm.h
View file @ 250d375d
......@@ -14,6 +14,9 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
}
struct map_desc;
struct meminfo;
struct pglist_data;
void __init build_mem_type_table(void);
void __init create_mapping(struct map_desc *md);
void __init bootmem_init(struct meminfo *mi);
void reserve_node_zero(struct pglist_data *pgdat);
arch/arm/mm/mm-armv.c → arch/arm/mm/mmu.c
View file @ 250d375d
This diff is collapsed.
arch/arm/mm/nommu.c
View file @ 250d375d
......@@ -11,6 +11,49 @@
#include <asm/io.h>
#include <asm/page.h>
#include "mm.h"
extern void _stext, __data_start, _end;
/*
* Reserve the various regions of node 0
*/
void __init reserve_node_zero(pg_data_t *pgdat)
{
/*
* Register the kernel text and data with bootmem.
* Note that this can only be in node 0.
*/
#ifdef CONFIG_XIP_KERNEL
reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
#else
reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
#endif
/*
* Register the exception vector page.
* some architectures which the DRAM is the exception vector to trap,
* alloc_page breaks with error, although it is not NULL, but "0."
*/
reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE);
}
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
*/
void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
{
bootmem_init(mi);
}
/*
* We don't need to do anything here for nommu machines.
*/
void setup_mm_for_reboot(char mode)
{
}
void flush_dcache_page(struct page *page)
{
__cpuc_flush_dcache_page(page_address(page));
......
arch/arm/mm/pgd.c 0 → 100644
View file @ 250d375d
/*
* linux/arch/arm/mm/pgd.c
*
* Copyright (C) 1998-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/mm.h>
#include <linux/highmem.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <asm/tlbflush.h>
#include "mm.h"
#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
/*
* need to get a 16k page for level 1
*/
pgd_t *get_pgd_slow(struct mm_struct *mm)
{
pgd_t *new_pgd, *init_pgd;
pmd_t *new_pmd, *init_pmd;
pte_t *new_pte, *init_pte;
new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
if (!new_pgd)
goto no_pgd;
memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
/*
* Copy over the kernel and IO PGD entries
*/
init_pgd = pgd_offset_k(0);
memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
(PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
if (!vectors_high()) {
/*
* On ARM, first page must always be allocated since it
* contains the machine vectors.
*/
new_pmd = pmd_alloc(mm, new_pgd, 0);
if (!new_pmd)
goto no_pmd;
new_pte = pte_alloc_map(mm, new_pmd, 0);
if (!new_pte)
goto no_pte;
init_pmd = pmd_offset(init_pgd, 0);
init_pte = pte_offset_map_nested(init_pmd, 0);
set_pte(new_pte, *init_pte);
pte_unmap_nested(init_pte);
pte_unmap(new_pte);
}
return new_pgd;
no_pte:
pmd_free(new_pmd);
no_pmd:
free_pages((unsigned long)new_pgd, 2);
no_pgd:
return NULL;
}
void free_pgd_slow(pgd_t *pgd)
{
pmd_t *pmd;
struct page *pte;
if (!pgd)
return;
/* pgd is always present and good */
pmd = pmd_off(pgd, 0);
if (pmd_none(*pmd))
goto free;
if (pmd_bad(*pmd)) {
pmd_ERROR(*pmd);
pmd_clear(pmd);
goto free;
}
pte = pmd_page(*pmd);
pmd_clear(pmd);
dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
pte_lock_deinit(pte);
pte_free(pte);
pmd_free(pmd);
free:
free_pages((unsigned long) pgd, 2);
}
arch/arm/mm/proc-arm740.S 0 → 100644
View file @ 250d375d
/*
* linux/arch/arm/mm/arm740.S: utility functions for ARM740
*
* Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
.text
/*
* cpu_arm740_proc_init()
* cpu_arm740_do_idle()
* cpu_arm740_dcache_clean_area()
* cpu_arm740_switch_mm()
*
* These are not required.
*/
ENTRY(cpu_arm740_proc_init)
ENTRY(cpu_arm740_do_idle)
ENTRY(cpu_arm740_dcache_clean_area)
ENTRY(cpu_arm740_switch_mm)
mov pc, lr
/*
* cpu_arm740_proc_fin()
*/
ENTRY(cpu_arm740_proc_fin)
stmfd sp!, {lr}
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #0x3f000000 @ bank/f/lock/s
bic r0, r0, #0x0000000c @ w-buffer/cache
mcr p15, 0, r0, c1, c0, 0 @ disable caches
mcr p15, 0, r0, c7, c0, 0 @ invalidate cache
ldmfd sp!, {pc}
/*
* cpu_arm740_reset(loc)
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
ENTRY(cpu_arm740_reset)
mov ip, #0
mcr p15, 0, ip, c7, c0, 0 @ invalidate cache
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
bic ip, ip, #0x0000000c @ ............wc..
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
__INIT
.type __arm740_setup, #function
__arm740_setup:
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate caches
mcr p15, 0, r0, c6, c3 @ disable area 3~7
mcr p15, 0, r0, c6, c4
mcr p15, 0, r0, c6, c5
mcr p15, 0, r0, c6, c6
mcr p15, 0, r0, c6, c7
mov r0, #0x0000003F @ base = 0, size = 4GB
mcr p15, 0, r0, c6, c0 @ set area 0, default
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c1 @ set area 1, RAM
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
mov r0, #0x06
mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r0, #0x00 @ disable whole write buffer
#else
mov r0, #0x02 @ Region 1 write bufferred
#endif
mcr p15, 0, r0, c3, c0
mov r0, #0x10000
sub r0, r0, #1 @ r0 = 0xffff
mcr p15, 0, r0, c5, c0 @ all read/write access
mrc p15, 0, r0, c1, c0 @ get control register
bic r0, r0, #0x3F000000 @ set to standard caching mode
@ need some benchmark
orr r0, r0, #0x0000000d @ MPU/Cache/WB
mov pc, lr
.size __arm740_setup, . - __arm740_setup
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type arm740_processor_functions, #object
ENTRY(arm740_processor_functions)
.word v4t_late_abort
.word cpu_arm740_proc_init
.word cpu_arm740_proc_fin
.word cpu_arm740_reset
.word cpu_arm740_do_idle
.word cpu_arm740_dcache_clean_area
.word cpu_arm740_switch_mm
.word 0 @ cpu_*_set_pte
.size arm740_processor_functions, . - arm740_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv4"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v4"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_arm740_name, #object
cpu_arm740_name:
.ascii "ARM740T"
.size cpu_arm740_name, . - cpu_arm740_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __arm740_proc_info,#object
__arm740_proc_info:
.long 0x41807400
.long 0xfffffff0
.long 0
b __arm740_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT
.long cpu_arm740_name
.long arm740_processor_functions
.long 0
.long 0
.long v3_cache_fns @ cache model
.size __arm740_proc_info, . - __arm740_proc_info
arch/arm/mm/proc-arm7tdmi.S 0 → 100644
View file @ 250d375d
/*
* linux/arch/arm/mm/proc-arm7tdmi.S: utility functions for ARM7TDMI
*
* Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
.text
/*
* cpu_arm7tdmi_proc_init()
* cpu_arm7tdmi_do_idle()
* cpu_arm7tdmi_dcache_clean_area()
* cpu_arm7tdmi_switch_mm()
*
* These are not required.
*/
ENTRY(cpu_arm7tdmi_proc_init)
ENTRY(cpu_arm7tdmi_do_idle)
ENTRY(cpu_arm7tdmi_dcache_clean_area)
ENTRY(cpu_arm7tdmi_switch_mm)
mov pc, lr
/*
* cpu_arm7tdmi_proc_fin()
*/
ENTRY(cpu_arm7tdmi_proc_fin)
mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, r0
mov pc, lr
/*
* Function: cpu_arm7tdmi_reset(loc)
* Params : loc(r0) address to jump to
* Purpose : Sets up everything for a reset and jump to the location for soft reset.
*/
ENTRY(cpu_arm7tdmi_reset)
mov pc, r0
__INIT
.type __arm7tdmi_setup, #function
__arm7tdmi_setup:
mov pc, lr
.size __arm7tdmi_setup, . - __arm7tdmi_setup
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type arm7tdmi_processor_functions, #object
ENTRY(arm7tdmi_processor_functions)
.word v4t_late_abort
.word cpu_arm7tdmi_proc_init
.word cpu_arm7tdmi_proc_fin
.word cpu_arm7tdmi_reset
.word cpu_arm7tdmi_do_idle
.word cpu_arm7tdmi_dcache_clean_area
.word cpu_arm7tdmi_switch_mm
.word 0 @ cpu_*_set_pte
.size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv4t"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v4"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_arm7tdmi_name, #object
cpu_arm7tdmi_name:
.asciz "ARM7TDMI"
.size cpu_arm7tdmi_name, . - cpu_arm7tdmi_name
.type cpu_triscenda7_name, #object
cpu_triscenda7_name:
.asciz "Triscend-A7x"
.size cpu_triscenda7_name, . - cpu_triscenda7_name
.type cpu_at91_name, #object
cpu_at91_name:
.asciz "Atmel-AT91M40xxx"
.size cpu_at91_name, . - cpu_at91_name
.type cpu_s3c3410_name, #object
cpu_s3c3410_name:
.asciz "Samsung-S3C3410"
.size cpu_s3c3410_name, . - cpu_s3c3410_name
.type cpu_s3c44b0x_name, #object
cpu_s3c44b0x_name:
.asciz "Samsung-S3C44B0x"
.size cpu_s3c44b0x_name, . - cpu_s3c44b0x_name
.type cpu_s3c4510b, #object
cpu_s3c4510b_name:
.asciz "Samsung-S3C4510B"
.size cpu_s3c4510b_name, . - cpu_s3c4510b_name
.type cpu_s3c4530_name, #object
cpu_s3c4530_name:
.asciz "Samsung-S3C4530"
.size cpu_s3c4530_name, . - cpu_s3c4530_name
.type cpu_netarm_name, #object
cpu_netarm_name:
.asciz "NETARM"
.size cpu_netarm_name, . - cpu_netarm_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __arm7tdmi_proc_info, #object
__arm7tdmi_proc_info:
.long 0x41007700
.long 0xfff8ff00
.long 0
.long 0
b __arm7tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long cpu_arm7tdmi_name
.long arm7tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
.size __arm7tdmi_proc_info, . - __arm7dmi_proc_info
.type __triscenda7_proc_info, #object
__triscenda7_proc_info:
.long 0x0001d2ff
.long 0x0001ffff
.long 0
.long 0
b __arm7tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
.long cpu_triscenda7_name
.long arm7tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
.size __triscenda7_proc_info, . - __triscenda7_proc_info
.type __at91_proc_info, #object
__at91_proc_info:
.long 0x14000040
.long 0xfff000e0
.long 0
.long 0
b __arm7tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
.long cpu_at91_name
.long arm7tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
.size __at91_proc_info, . - __at91_proc_info
.type __s3c4510b_proc_info, #object
__s3c4510b_proc_info:
.long 0x36365000
.long 0xfffff000
.long 0
.long 0
b __arm7tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
.long cpu_s3c4510b_name
.long arm7tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
.size __s3c4510b_proc_info, . - __s3c4510b_proc_info
.type __s3c4530_proc_info, #object
__s3c4530_proc_info:
.long 0x4c000000
.long 0xfff000e0
.long 0
.long 0
b __arm7tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
.long cpu_s3c4530_name
.long arm7tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
.size __s3c4530_proc_info, . - __s3c4530_proc_info
.type __s3c3410_proc_info, #object
__s3c3410_proc_info:
.long 0x34100000
.long 0xffff0000
.long 0
.long 0
b __arm7tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
.long cpu_s3c3410_name
.long arm7tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
.size __s3c3410_proc_info, . - __s3c3410_proc_info
.type __s3c44b0x_proc_info, #object
__s3c44b0x_proc_info:
.long 0x44b00000
.long 0xffff0000
.long 0
.long 0
b __arm7tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
.long cpu_s3c44b0x_name
.long arm7tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
.size __s3c44b0x_proc_info, . - __s3c44b0x_proc_info
arch/arm/mm/proc-arm940.S 0 → 100644
View file @ 250d375d
/*
* linux/arch/arm/mm/arm940.S: utility functions for ARM940T
*
* Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
#define CACHE_DLINESIZE 16
#define CACHE_DSEGMENTS 4
#define CACHE_DENTRIES 64
.text
/*
* cpu_arm940_proc_init()
* cpu_arm940_switch_mm()
*
* These are not required.
*/
ENTRY(cpu_arm940_proc_init)
ENTRY(cpu_arm940_switch_mm)
mov pc, lr
/*
* cpu_arm940_proc_fin()
*/
ENTRY(cpu_arm940_proc_fin)
stmfd sp!, {lr}
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
bl arm940_flush_kern_cache_all
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x00001000 @ i-cache
bic r0, r0, #0x00000004 @ d-cache
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ldmfd sp!, {pc}
/*
* cpu_arm940_reset(loc)
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
ENTRY(cpu_arm940_reset)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ flush I cache
mcr p15, 0, ip, c7, c6, 0 @ flush D cache
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x00000005 @ .............c.p
bic ip, ip, #0x00001000 @ i-cache
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
/*
* cpu_arm940_do_idle()
*/
.align 5
ENTRY(cpu_arm940_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr
/*
* flush_user_cache_all()
*/
ENTRY(arm940_flush_user_cache_all)
/* FALLTHROUGH */
/*
* flush_kern_cache_all()
*
* Clean and invalidate the entire cache.
*/
ENTRY(arm940_flush_kern_cache_all)
mov r2, #VM_EXEC
/* FALLTHROUGH */
/*
* flush_user_cache_range(start, end, flags)
*
* There is no efficient way to flush a range of cache entries
* in the specified address range. Thus, flushes all.
*
* - start - start address (inclusive)
* - end - end address (exclusive)
* - flags - vm_flags describing address space
*/
ENTRY(arm940_flush_user_cache_range)
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ flush D cache
#else
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 3 to 0
#endif
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* coherent_kern_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(arm940_coherent_kern_range)
/* FALLTHROUGH */
/*
* coherent_user_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(arm940_coherent_user_range)
/* FALLTHROUGH */
/*
* flush_kern_dcache_page(void *page)
*
* Ensure no D cache aliasing occurs, either with itself or
* the I cache
*
* - addr - page aligned address
*/
ENTRY(arm940_flush_kern_dcache_page)
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 7 to 0
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_inv_range(start, end)
*
* There is no efficient way to invalidate a specifid virtual
* address range. Thus, invalidates all.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(arm940_dma_inv_range)
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2: mcr p15, 0, r3, c7, c6, 2 @ flush D entry
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 7 to 0
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_clean_range(start, end)
*
* There is no efficient way to clean a specifid virtual
* address range. Thus, cleans all.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(arm940_dma_clean_range)
ENTRY(cpu_arm940_dcache_clean_area)
mov ip, #0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2: mcr p15, 0, r3, c7, c10, 2 @ clean D entry
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 7 to 0
#endif
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_flush_range(start, end)
*
* There is no efficient way to clean and invalidate a specifid
* virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(arm940_dma_flush_range)
mov ip, #0
mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
2:
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry
#else
mcr p15, 0, r3, c7, c10, 2 @ clean D entry
#endif
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 4
bcs 1b @ segments 7 to 0
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
ENTRY(arm940_cache_fns)
.long arm940_flush_kern_cache_all
.long arm940_flush_user_cache_all
.long arm940_flush_user_cache_range
.long arm940_coherent_kern_range
.long arm940_coherent_user_range
.long arm940_flush_kern_dcache_page
.long arm940_dma_inv_range
.long arm940_dma_clean_range
.long arm940_dma_flush_range
__INIT
.type __arm940_setup, #function
__arm940_setup:
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c6, c3, 0 @ disable data area 3~7
mcr p15, 0, r0, c6, c4, 0
mcr p15, 0, r0, c6, c5, 0
mcr p15, 0, r0, c6, c6, 0
mcr p15, 0, r0, c6, c7, 0
mcr p15, 0, r0, c6, c3, 1 @ disable instruction area 3~7
mcr p15, 0, r0, c6, c4, 1
mcr p15, 0, r0, c6, c5, 1
mcr p15, 0, r0, c6, c6, 1
mcr p15, 0, r0, c6, c7, 1
mov r0, #0x0000003F @ base = 0, size = 4GB
mcr p15, 0, r0, c6, c0, 0 @ set area 0, default
mcr p15, 0, r0, c6, c0, 1
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c1, 0 @ set area 1, RAM
mcr p15, 0, r0, c6, c1, 1
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c2, 0 @ set area 2, ROM/FLASH
mcr p15, 0, r0, c6, c2, 1
mov r0, #0x06
mcr p15, 0, r0, c2, c0, 0 @ Region 1&2 cacheable
mcr p15, 0, r0, c2, c0, 1
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r0, #0x00 @ disable whole write buffer
#else
mov r0, #0x02 @ Region 1 write bufferred
#endif
mcr p15, 0, r0, c3, c0, 0
mov r0, #0x10000
sub r0, r0, #1 @ r0 = 0xffff
mcr p15, 0, r0, c5, c0, 0 @ all read/write access
mcr p15, 0, r0, c5, c0, 1
mrc p15, 0, r0, c1, c0 @ get control register
orr r0, r0, #0x00001000 @ I-cache
orr r0, r0, #0x00000005 @ MPU/D-cache
mov pc, lr
.size __arm940_setup, . - __arm940_setup
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type arm940_processor_functions, #object
ENTRY(arm940_processor_functions)
.word nommu_early_abort
.word cpu_arm940_proc_init
.word cpu_arm940_proc_fin
.word cpu_arm940_reset
.word cpu_arm940_do_idle
.word cpu_arm940_dcache_clean_area
.word cpu_arm940_switch_mm
.word 0 @ cpu_*_set_pte
.size arm940_processor_functions, . - arm940_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv4t"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v4"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_arm940_name, #object
cpu_arm940_name:
.ascii "ARM940T"
.size cpu_arm940_name, . - cpu_arm940_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __arm940_proc_info,#object
__arm940_proc_info:
.long 0x41009400
.long 0xff00fff0
.long 0
b __arm940_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
.long cpu_arm940_name
.long arm940_processor_functions
.long 0
.long 0
.long arm940_cache_fns
.size __arm940_proc_info, . - __arm940_proc_info
arch/arm/mm/proc-arm946.S 0 → 100644
View file @ 250d375d
This diff is collapsed.
arch/arm/mm/proc-arm9tdmi.S 0 → 100644
View file @ 250d375d
/*
* linux/arch/arm/mm/proc-arm9tdmi.S: utility functions for ARM9TDMI
*
* Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
.text
/*
* cpu_arm9tdmi_proc_init()
* cpu_arm9tdmi_do_idle()
* cpu_arm9tdmi_dcache_clean_area()
* cpu_arm9tdmi_switch_mm()
*
* These are not required.
*/
ENTRY(cpu_arm9tdmi_proc_init)
ENTRY(cpu_arm9tdmi_do_idle)
ENTRY(cpu_arm9tdmi_dcache_clean_area)
ENTRY(cpu_arm9tdmi_switch_mm)
mov pc, lr
/*
* cpu_arm9tdmi_proc_fin()
*/
ENTRY(cpu_arm9tdmi_proc_fin)
mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, r0
mov pc, lr
/*
* Function: cpu_arm9tdmi_reset(loc)
* Params : loc(r0) address to jump to
* Purpose : Sets up everything for a reset and jump to the location for soft reset.
*/
ENTRY(cpu_arm9tdmi_reset)
mov pc, r0
__INIT
.type __arm9tdmi_setup, #function
__arm9tdmi_setup:
mov pc, lr
.size __arm9tdmi_setup, . - __arm9tdmi_setup
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type arm9tdmi_processor_functions, #object
ENTRY(arm9tdmi_processor_functions)
.word nommu_early_abort
.word cpu_arm9tdmi_proc_init
.word cpu_arm9tdmi_proc_fin
.word cpu_arm9tdmi_reset
.word cpu_arm9tdmi_do_idle
.word cpu_arm9tdmi_dcache_clean_area
.word cpu_arm9tdmi_switch_mm
.word 0 @ cpu_*_set_pte
.size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv4t"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v4"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_arm9tdmi_name, #object
cpu_arm9tdmi_name:
.asciz "ARM9TDMI"
.size cpu_arm9tdmi_name, . - cpu_arm9tdmi_name
.type cpu_p2001_name, #object
cpu_p2001_name:
.asciz "P2001"
.size cpu_p2001_name, . - cpu_p2001_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __arm9tdmi_proc_info, #object
__arm9tdmi_proc_info:
.long 0x41009900
.long 0xfff8ff00
.long 0
.long 0
b __arm9tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
.long cpu_arm9tdmi_name
.long arm9tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
.size __arm9tdmi_proc_info, . - __arm9dmi_proc_info
.type __p2001_proc_info, #object
__p2001_proc_info:
.long 0x41029000
.long 0xffffffff
.long 0
.long 0
b __arm9tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
.long cpu_p2001_name
.long arm9tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
.size __p2001_proc_info, . - __p2001_proc_info
include/asm-arm/cacheflush.h
View file @ 250d375d
......@@ -25,7 +25,7 @@
#undef _CACHE
#undef MULTI_CACHE
#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
#if defined(CONFIG_CPU_CACHE_V3)
# ifdef _CACHE
# define MULTI_CACHE 1
# else
......@@ -33,7 +33,7 @@
# endif
#endif
#if defined(CONFIG_CPU_ARM720T)
#if defined(CONFIG_CPU_CACHE_V4)
# ifdef _CACHE
# define MULTI_CACHE 1
# else
......@@ -54,7 +54,23 @@
# endif
#endif
#if defined(CONFIG_CPU_SA110) || defined(CONFIG_CPU_SA1100)
#if defined(CONFIG_CPU_ARM940T)
# ifdef _CACHE
# define MULTI_CACHE 1
# else
# define _CACHE arm940
# endif
#endif
#if defined(CONFIG_CPU_ARM946E)
# ifdef _CACHE
# define MULTI_CACHE 1
# else
# define _CACHE arm946
# endif
#endif
#if defined(CONFIG_CPU_CACHE_V4WB)
# ifdef _CACHE
# define MULTI_CACHE 1
# else
......
include/asm-arm/proc-fns.h
View file @ 250d375d
......@@ -33,6 +33,14 @@
# define CPU_NAME cpu_arm6
# endif
# endif
# ifdef CONFIG_CPU_ARM7TDMI
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
# else
# define CPU_NAME cpu_arm7tdmi
# endif
# endif
# ifdef CONFIG_CPU_ARM710
# ifdef CPU_NAME
# undef MULTI_CPU
......@@ -49,6 +57,22 @@
# define CPU_NAME cpu_arm720
# endif
# endif
# ifdef CONFIG_CPU_ARM740T
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
# else
# define CPU_NAME cpu_arm740
# endif
# endif
# ifdef CONFIG_CPU_ARM9TDMI
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
# else
# define CPU_NAME cpu_arm9tdmi
# endif
# endif
# ifdef CONFIG_CPU_ARM920T
# ifdef CPU_NAME
# undef MULTI_CPU
......@@ -81,6 +105,22 @@
# define CPU_NAME cpu_arm926
# endif
# endif
# ifdef CONFIG_CPU_ARM940T
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
# else
# define CPU_NAME cpu_arm940
# endif
# endif
# ifdef CONFIG_CPU_ARM946E
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
# else
# define CPU_NAME cpu_arm946
# endif
# endif
# ifdef CONFIG_CPU_SA110
# ifdef CPU_NAME
# undef MULTI_CPU
......
include/asm-arm/setup.h
View file @ 250d375d
......@@ -194,13 +194,15 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn }
# define NR_BANKS 8
#endif
struct membank {
unsigned long start;
unsigned long size;
int node;
};
struct meminfo {
int nr_banks;
struct {
unsigned long start;
unsigned long size;
int node;
} bank[NR_BANKS];
struct membank bank[NR_BANKS];
};
/*
......
include/asm-arm/system.h
View file @ 250d375d
......@@ -46,6 +46,7 @@
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
#ifdef CONFIG_CPU_CP15
#define read_cpuid(reg) \
({ \
unsigned int __val; \
......@@ -55,6 +56,9 @@
: "cc"); \
__val; \
})
#else
#define read_cpuid(reg) (processor_id)
#endif
/*
* This is used to ensure the compiler did actually allocate the register we
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7