Commit 2576a9ac authored by Denis Kenzior's avatar Denis Kenzior Committed by Johannes Berg

nl80211: Implement TX of control port frames

This commit implements the TX side of NL80211_CMD_CONTROL_PORT_FRAME.
Userspace provides the raw EAPoL frame using NL80211_ATTR_FRAME.
Userspace should also provide the destination address and the protocol
type to use when sending the frame.  This is used to implement TX of
Pre-authentication frames.  If CONTROL_PORT_ETHERTYPE_NO_ENCRYPT is
specified, then the driver will be asked not to encrypt the outgoing
frame.

A new EXT_FEATURE flag is introduced so that nl80211 code can check
whether a given wiphy has capability to pass EAPoL frames over nl80211.
Signed-off-by: default avatarDenis Kenzior <denkenz@gmail.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent 6a671a50
......@@ -2961,6 +2961,9 @@ struct cfg80211_external_auth_params {
*
* @external_auth: indicates result of offloaded authentication processing from
* user space
*
* @tx_control_port: TX a control port frame (EAPoL). The noencrypt parameter
* tells the driver that the frame should not be encrypted.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
......@@ -3256,6 +3259,12 @@ struct cfg80211_ops {
const u8 *aa);
int (*external_auth)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_external_auth_params *params);
int (*tx_control_port)(struct wiphy *wiphy,
struct net_device *dev,
const u8 *buf, size_t len,
const u8 *dest, const __be16 proto,
const bool noencrypt);
};
/*
......
......@@ -5024,6 +5024,8 @@ enum nl80211_feature_flags {
* channel change triggered by radar detection event.
* No need to start CAC from user-space, no need to react to
* "radar detected" event.
* @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
* receiving control port frames over nl80211 instead of the netdevice.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
......@@ -5055,6 +5057,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_LOW_POWER_SCAN,
NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
NL80211_EXT_FEATURE_DFS_OFFLOAD,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
......
......@@ -12535,6 +12535,68 @@ static int nl80211_external_auth(struct sk_buff *skb, struct genl_info *info)
return rdev_external_auth(rdev, dev, &params);
}
static int nl80211_tx_control_port(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
const u8 *buf;
size_t len;
u8 *dest;
u16 proto;
bool noencrypt;
int err;
if (!wiphy_ext_feature_isset(&rdev->wiphy,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211))
return -EOPNOTSUPP;
if (!rdev->ops->tx_control_port)
return -EOPNOTSUPP;
if (!info->attrs[NL80211_ATTR_FRAME] ||
!info->attrs[NL80211_ATTR_MAC] ||
!info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]) {
GENL_SET_ERR_MSG(info, "Frame, MAC or ethertype missing");
return -EINVAL;
}
wdev_lock(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_MESH_POINT:
break;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
if (wdev->current_bss)
break;
err = -ENOTCONN;
goto out;
default:
err = -EOPNOTSUPP;
goto out;
}
wdev_unlock(wdev);
buf = nla_data(info->attrs[NL80211_ATTR_FRAME]);
len = nla_len(info->attrs[NL80211_ATTR_FRAME]);
dest = nla_data(info->attrs[NL80211_ATTR_MAC]);
proto = nla_get_u16(info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]);
noencrypt =
nla_get_flag(info->attrs[NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT]);
return rdev_tx_control_port(rdev, dev, buf, len,
dest, cpu_to_be16(proto), noencrypt);
out:
wdev_unlock(wdev);
return err;
}
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
......@@ -13438,7 +13500,14 @@ static const struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_CONTROL_PORT_FRAME,
.doit = nl80211_tx_control_port,
.policy = nl80211_policy,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
};
static struct genl_family nl80211_fam __ro_after_init = {
......
......@@ -714,6 +714,21 @@ static inline int rdev_mgmt_tx(struct cfg80211_registered_device *rdev,
return ret;
}
static inline int rdev_tx_control_port(struct cfg80211_registered_device *rdev,
struct net_device *dev,
const void *buf, size_t len,
const u8 *dest, __be16 proto,
const bool noencrypt)
{
int ret;
trace_rdev_tx_control_port(&rdev->wiphy, dev, buf, len,
dest, proto, noencrypt);
ret = rdev->ops->tx_control_port(&rdev->wiphy, dev, buf, len,
dest, proto, noencrypt);
trace_rdev_return_int(&rdev->wiphy, ret);
return ret;
}
static inline int
rdev_mgmt_tx_cancel_wait(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, u64 cookie)
......
......@@ -1882,6 +1882,32 @@ TRACE_EVENT(rdev_mgmt_tx,
BOOL_TO_STR(__entry->dont_wait_for_ack))
);
TRACE_EVENT(rdev_tx_control_port,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
const u8 *buf, size_t len, const u8 *dest, __be16 proto,
bool unencrypted),
TP_ARGS(wiphy, netdev, buf, len, dest, proto, unencrypted),
TP_STRUCT__entry(
WIPHY_ENTRY
NETDEV_ENTRY
MAC_ENTRY(dest)
__field(__be16, proto)
__field(bool, unencrypted)
),
TP_fast_assign(
WIPHY_ASSIGN;
NETDEV_ASSIGN;
MAC_ASSIGN(dest, dest);
__entry->proto = proto;
__entry->unencrypted = unencrypted;
),
TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " MAC_PR_FMT ","
" proto: 0x%x, unencrypted: %s",
WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(dest),
be16_to_cpu(__entry->proto),
BOOL_TO_STR(__entry->unencrypted))
);
TRACE_EVENT(rdev_set_noack_map,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
u16 noack_map),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment