Commit 25dfc9e3 authored by Kan Liang's avatar Kan Liang Committed by Thomas Gleixner

perf/x86/intel: Limit the period on Haswell

Running the ltp test cve-2015-3290 concurrently reports the following
warnings.

perfevents: irq loop stuck!
  WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174
  intel_pmu_handle_irq+0x285/0x370
  Call Trace:
   <NMI>
   ? __warn+0xa4/0x220
   ? intel_pmu_handle_irq+0x285/0x370
   ? __report_bug+0x123/0x130
   ? intel_pmu_handle_irq+0x285/0x370
   ? __report_bug+0x123/0x130
   ? intel_pmu_handle_irq+0x285/0x370
   ? report_bug+0x3e/0xa0
   ? handle_bug+0x3c/0x70
   ? exc_invalid_op+0x18/0x50
   ? asm_exc_invalid_op+0x1a/0x20
   ? irq_work_claim+0x1e/0x40
   ? intel_pmu_handle_irq+0x285/0x370
   perf_event_nmi_handler+0x3d/0x60
   nmi_handle+0x104/0x330

Thanks to Thomas Gleixner's analysis, the issue is caused by the low
initial period (1) of the frequency estimation algorithm, which triggers
the defects of the HW, specifically erratum HSW11 and HSW143. (For the
details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/)

The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL
event, but the initial period in the freq mode is 1. The erratum is the
same as the BDM11, which has been supported in the kernel. A minimum
period of 128 is enforced as well on HSW.

HSW143 is regarding that the fixed counter 1 may overcount 32 with the
Hyper-Threading is enabled. However, based on the test, the hardware
has more issues than it tells. Besides the fixed counter 1, the message
'interrupt took too long' can be observed on any counter which was armed
with a period < 32 and two events expired in the same NMI. A minimum
period of 32 is enforced for the rest of the events.
The recommended workaround code of the HSW143 is not implemented.
Because it only addresses the issue for the fixed counter. It brings
extra overhead through extra MSR writing. No related overcounting issue
has been reported so far.

Fixes: 3a632cb2 ("perf/x86/intel: Add simple Haswell PMU support")
Reported-by: default avatarLi Huafei <lihuafei1@huawei.com>
Suggested-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarKan Liang <kan.liang@linux.intel.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240819183004.3132920-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20240729223328.327835-1-lihuafei1@huawei.com/
parent 5be63fc1
......@@ -4589,6 +4589,25 @@ static enum hybrid_cpu_type adl_get_hybrid_cpu_type(void)
return HYBRID_INTEL_CORE;
}
static inline bool erratum_hsw11(struct perf_event *event)
{
return (event->hw.config & INTEL_ARCH_EVENT_MASK) ==
X86_CONFIG(.event=0xc0, .umask=0x01);
}
/*
* The HSW11 requires a period larger than 100 which is the same as the BDM11.
* A minimum period of 128 is enforced as well for the INST_RETIRED.ALL.
*
* The message 'interrupt took too long' can be observed on any counter which
* was armed with a period < 32 and two events expired in the same NMI.
* A minimum period of 32 is enforced for the rest of the events.
*/
static void hsw_limit_period(struct perf_event *event, s64 *left)
{
*left = max(*left, erratum_hsw11(event) ? 128 : 32);
}
/*
* Broadwell:
*
......@@ -4606,8 +4625,7 @@ static enum hybrid_cpu_type adl_get_hybrid_cpu_type(void)
*/
static void bdw_limit_period(struct perf_event *event, s64 *left)
{
if ((event->hw.config & INTEL_ARCH_EVENT_MASK) ==
X86_CONFIG(.event=0xc0, .umask=0x01)) {
if (erratum_hsw11(event)) {
if (*left < 128)
*left = 128;
*left &= ~0x3fULL;
......@@ -6766,6 +6784,7 @@ __init int intel_pmu_init(void)
x86_pmu.hw_config = hsw_hw_config;
x86_pmu.get_event_constraints = hsw_get_event_constraints;
x86_pmu.limit_period = hsw_limit_period;
x86_pmu.lbr_double_abort = true;
extra_attr = boot_cpu_has(X86_FEATURE_RTM) ?
hsw_format_attr : nhm_format_attr;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment