mmc: sdhci-esdhc-imx: separate 100/200 MHz pinctrl states check

As indicated by function esdhc_change_pinstate(), SDR50 and DDR50
require pins_100mhz, while SDR104 and HS400 require pins_200mhz.  Some
system design may support SDR50 and DDR50 with 100mhz pin state only
(without 200mhz one).  Currently the combined 100/200 MHz pinctrl state
check prevents such system from running SDR50 and DDR50.  Separate the
check to support such system design.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20210326110214.28416-1-shawnguo@kernel.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -434,10 +434,10 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 			 * Do not advertise faster UHS modes if there are no
 			 * pinctrl states for 100MHz/200MHz.
 			 */
-			if (IS_ERR_OR_NULL(imx_data->pins_100mhz) ||
-			    IS_ERR_OR_NULL(imx_data->pins_200mhz))
-				val &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50
-					 | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_HS400);
+			if (IS_ERR_OR_NULL(imx_data->pins_100mhz))
+				val &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50);
+			if (IS_ERR_OR_NULL(imx_data->pins_200mhz))
+				val &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_HS400);
 		}
 	}