Commit 260463d4 authored by Baruch Siach's avatar Baruch Siach Committed by Linus Walleij

pinctrl: remove enable/disable callbacks from documentation

Commit 03e9f0ca (pinctrl: clean up after enable refactoring) updated the
documentation to remove mention of disable(), and rename enable() to set_mux().
One in-text mention was forgotten. Fix this.

Fixes: 03e9f0ca ('pinctrl: clean up after enable refactoring')
Signed-off-by: default avatarBaruch Siach <baruch@tkos.co.il>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent c445cac3
...@@ -569,9 +569,8 @@ is possible to perform the requested mux setting, poke the hardware so that ...@@ -569,9 +569,8 @@ is possible to perform the requested mux setting, poke the hardware so that
this happens. this happens.
Pinmux drivers are required to supply a few callback functions, some are Pinmux drivers are required to supply a few callback functions, some are
optional. Usually the enable() and disable() functions are implemented, optional. Usually the set_mux() function is implemented, writing values into
writing values into some certain registers to activate a certain mux setting some certain registers to activate a certain mux setting for a certain pin.
for a certain pin.
A simple driver for the above example will work by setting bits 0, 1, 2, 3 or 4 A simple driver for the above example will work by setting bits 0, 1, 2, 3 or 4
into some register named MUX to select a certain function with a certain into some register named MUX to select a certain function with a certain
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment