usb: ohci-sa1111: remove special sa1111 mmio accessors

Remove the special SA1111 MMIO accessors from the ohci-sa1111 driver
as their definition will be removed shortly.  The SA1111 accessors are
barrierless, so use the _relaxed variants.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/ohci-sa1111.c

@@ -42,7 +42,7 @@
 #if 0
 static void dump_hci_status(struct usb_hcd *hcd, const char *label)
 {
-	unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
+	unsigned long status = readl_relaxed(hcd->regs + USB_STATUS);
 
 	printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
 	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
@@ -134,7 +134,7 @@ static int sa1111_start_hc(struct sa1111_dev *dev)
 	 * Configure the power sense and control lines.  Place the USB
 	 * host controller in reset.
 	 */
-	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
+	writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
 		      dev->mapbase + USB_RESET);
 
 	/*
@@ -144,7 +144,7 @@ static int sa1111_start_hc(struct sa1111_dev *dev)
 	ret = sa1111_enable_device(dev);
 	if (ret == 0) {
 		udelay(11);
-		sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
+		writel_relaxed(usb_rst, dev->mapbase + USB_RESET);
 	}
 
 	return ret;
@@ -159,8 +159,8 @@ static void sa1111_stop_hc(struct sa1111_dev *dev)
 	/*
 	 * Put the USB host controller into reset.
 	 */
-	usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
-	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
+	usb_rst = readl_relaxed(dev->mapbase + USB_RESET);
+	writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
 		      dev->mapbase + USB_RESET);
 
 	/*