Commit 26444877 authored by Shaohua Li's avatar Shaohua Li Committed by Eric Anholt

drm/i915: remove Pineview EOS protection support

HW guys have an evaluation about the impact about EOS, and say the impact
is quite small, so they have removed EOS detection support. This patch
removes EOS feature.

revert commit 04302965
directly reverting it gives a hunk error, so please use this one.
Signed-off-by: default avatarShaohua Li <shaohua.li@intel.com>
Signed-off-by: default avatarEric Anholt <eric@anholt.net>
[anholt: fixed up commit message for update that the feature's really gone]
parent 311089d3
...@@ -622,27 +622,6 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) ...@@ -622,27 +622,6 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT); I915_READ(PORT_HOTPLUG_STAT);
/* EOS interrupts occurs */
if (IS_IGD(dev) &&
(hotplug_status & CRT_EOS_INT_STATUS)) {
u32 temp;
DRM_DEBUG_DRIVER("EOS interrupt occurs\n");
/* status is already cleared */
temp = I915_READ(ADPA);
temp &= ~ADPA_DAC_ENABLE;
I915_WRITE(ADPA, temp);
temp = I915_READ(PORT_HOTPLUG_EN);
temp &= ~CRT_EOS_INT_EN;
I915_WRITE(PORT_HOTPLUG_EN, temp);
temp = I915_READ(PORT_HOTPLUG_STAT);
if (temp & CRT_EOS_INT_STATUS)
I915_WRITE(PORT_HOTPLUG_STAT,
CRT_EOS_INT_STATUS);
}
} }
I915_WRITE(IIR, iir); I915_WRITE(IIR, iir);
......
...@@ -852,7 +852,6 @@ ...@@ -852,7 +852,6 @@
#define SDVOB_HOTPLUG_INT_EN (1 << 26) #define SDVOB_HOTPLUG_INT_EN (1 << 26)
#define SDVOC_HOTPLUG_INT_EN (1 << 25) #define SDVOC_HOTPLUG_INT_EN (1 << 25)
#define TV_HOTPLUG_INT_EN (1 << 18) #define TV_HOTPLUG_INT_EN (1 << 18)
#define CRT_EOS_INT_EN (1 << 10)
#define CRT_HOTPLUG_INT_EN (1 << 9) #define CRT_HOTPLUG_INT_EN (1 << 9)
#define CRT_HOTPLUG_FORCE_DETECT (1 << 3) #define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
#define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8) #define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8)
...@@ -887,7 +886,6 @@ ...@@ -887,7 +886,6 @@
#define DPC_HOTPLUG_INT_STATUS (1 << 28) #define DPC_HOTPLUG_INT_STATUS (1 << 28)
#define HDMID_HOTPLUG_INT_STATUS (1 << 27) #define HDMID_HOTPLUG_INT_STATUS (1 << 27)
#define DPD_HOTPLUG_INT_STATUS (1 << 27) #define DPD_HOTPLUG_INT_STATUS (1 << 27)
#define CRT_EOS_INT_STATUS (1 << 12)
#define CRT_HOTPLUG_INT_STATUS (1 << 11) #define CRT_HOTPLUG_INT_STATUS (1 << 11)
#define TV_HOTPLUG_INT_STATUS (1 << 10) #define TV_HOTPLUG_INT_STATUS (1 << 10)
#define CRT_HOTPLUG_MONITOR_MASK (3 << 8) #define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
......
...@@ -64,34 +64,6 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode) ...@@ -64,34 +64,6 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
} }
I915_WRITE(reg, temp); I915_WRITE(reg, temp);
if (IS_IGD(dev)) {
if (mode == DRM_MODE_DPMS_OFF) {
/* turn off DAC */
temp = I915_READ(PORT_HOTPLUG_EN);
temp &= ~CRT_EOS_INT_EN;
I915_WRITE(PORT_HOTPLUG_EN, temp);
temp = I915_READ(PORT_HOTPLUG_STAT);
if (temp & CRT_EOS_INT_STATUS)
I915_WRITE(PORT_HOTPLUG_STAT,
CRT_EOS_INT_STATUS);
} else {
/* turn on DAC. EOS interrupt must be enabled after DAC
* is enabled, so it sounds not good to enable it in
* i915_driver_irq_postinstall()
* wait 12.5ms after DAC is enabled
*/
msleep(13);
temp = I915_READ(PORT_HOTPLUG_STAT);
if (temp & CRT_EOS_INT_STATUS)
I915_WRITE(PORT_HOTPLUG_STAT,
CRT_EOS_INT_STATUS);
temp = I915_READ(PORT_HOTPLUG_EN);
temp |= CRT_EOS_INT_EN;
I915_WRITE(PORT_HOTPLUG_EN, temp);
}
}
} }
static int intel_crt_mode_valid(struct drm_connector *connector, static int intel_crt_mode_valid(struct drm_connector *connector,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment