Commit 266e02bc authored by Rafael J. Wysocki's avatar Rafael J. Wysocki Committed by Greg Kroah-Hartman

PM / runtime: Avoid false-positive warnings from might_sleep_if()


[ Upstream commit a9306a63 ]

The might_sleep_if() assertions in __pm_runtime_idle(),
__pm_runtime_suspend() and __pm_runtime_resume() may generate
false-positive warnings in some situations.  For example, that
happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair
is executed with disabled interrupts within an outer
pm_runtime_get_sync()/pm_runtime_put() section for the same device.
[Generally, pm_runtime_get_sync() may sleep, so it should not be
called with disabled interrupts, but in this particular case the
previous pm_runtime_get_sync() guarantees that the device will not
be suspended, so the inner pm_runtime_get_sync() will return
immediately after incrementing the device's usage counter.]

That started to happen in the i915 driver in 4.10-rc, leading to
the following splat:

 BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032
 in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg
 1 lock held by Xorg/1500:
  #0:  (&dev->struct_mutex){+.+.+.}, at:
  [<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915]
 CPU: 0 PID: 1500 Comm: Xorg Not tainted
 Call Trace:
  dump_stack+0x85/0xc2
  ___might_sleep+0x196/0x260
  __might_sleep+0x53/0xb0
  __pm_runtime_resume+0x7a/0x90
  intel_runtime_pm_get+0x25/0x90 [i915]
  aliasing_gtt_bind_vma+0xaa/0xf0 [i915]
  i915_vma_bind+0xaf/0x1e0 [i915]
  i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915]
  i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915]
  ? trace_hardirqs_on+0xd/0x10
  ? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915]
  ? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915]
  i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915]
  ? __might_fault+0x4e/0xb0
  i915_gem_execbuffer2+0xc5/0x260 [i915]
  ? __might_fault+0x4e/0xb0
  drm_ioctl+0x206/0x450 [drm]
  ? i915_gem_execbuffer+0x340/0x340 [i915]
  ? __fget+0x5/0x200
  do_vfs_ioctl+0x91/0x6f0
  ? __fget+0x111/0x200
  ? __fget+0x5/0x200
  SyS_ioctl+0x79/0x90
  entry_SYSCALL_64_fastpath+0x23/0xc6

even though the code triggering it is correct.

Unfortunately, the might_sleep_if() assertions in question are
too coarse-grained to cover such cases correctly, so make them
a bit less sensitive in order to avoid the false-positives.
Reported-and-tested-by: default avatarSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 8d228758
......@@ -889,13 +889,13 @@ int __pm_runtime_idle(struct device *dev, int rpmflags)
unsigned long flags;
int retval;
might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
if (rpmflags & RPM_GET_PUT) {
if (!atomic_dec_and_test(&dev->power.usage_count))
return 0;
}
might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
spin_lock_irqsave(&dev->power.lock, flags);
retval = rpm_idle(dev, rpmflags);
spin_unlock_irqrestore(&dev->power.lock, flags);
......@@ -921,13 +921,13 @@ int __pm_runtime_suspend(struct device *dev, int rpmflags)
unsigned long flags;
int retval;
might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
if (rpmflags & RPM_GET_PUT) {
if (!atomic_dec_and_test(&dev->power.usage_count))
return 0;
}
might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
spin_lock_irqsave(&dev->power.lock, flags);
retval = rpm_suspend(dev, rpmflags);
spin_unlock_irqrestore(&dev->power.lock, flags);
......@@ -952,7 +952,8 @@ int __pm_runtime_resume(struct device *dev, int rpmflags)
unsigned long flags;
int retval;
might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe &&
dev->power.runtime_status != RPM_ACTIVE);
if (rpmflags & RPM_GET_PUT)
atomic_inc(&dev->power.usage_count);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment