Commit 2674e7ea authored by Jakub Kicinski's avatar Jakub Kicinski

net: usb: don't write directly to netdev->dev_addr

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Manually fix all net/usb drivers without separate maintainers.

v2: catc does DMA to the buffer, leave the conversion to Oliver
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 18867486
......@@ -336,6 +336,7 @@ static int ch9200_bind(struct usbnet *dev, struct usb_interface *intf)
{
int retval = 0;
unsigned char data[2];
u8 addr[ETH_ALEN];
retval = usbnet_get_endpoints(dev, intf);
if (retval)
......@@ -383,7 +384,8 @@ static int ch9200_bind(struct usbnet *dev, struct usb_interface *intf)
retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_CTRL, data, 0x02,
CONTROL_TIMEOUT_MS);
retval = get_mac_address(dev, dev->net->dev_addr);
retval = get_mac_address(dev, addr);
eth_hw_addr_set(dev->net, addr);
return retval;
}
......
......@@ -146,6 +146,7 @@ static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
u8 link[3];
int timeout = 50;
struct cx82310_priv *priv;
u8 addr[ETH_ALEN];
/* avoid ADSL modems - continue only if iProduct is "USB NET CARD" */
if (usb_string(udev, udev->descriptor.iProduct, buf, sizeof(buf)) > 0
......@@ -202,12 +203,12 @@ static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
goto err;
/* get the MAC address */
ret = cx82310_cmd(dev, CMD_GET_MAC_ADDR, true, NULL, 0,
dev->net->dev_addr, ETH_ALEN);
ret = cx82310_cmd(dev, CMD_GET_MAC_ADDR, true, NULL, 0, addr, ETH_ALEN);
if (ret) {
netdev_err(dev->net, "unable to read MAC address: %d\n", ret);
goto err;
}
eth_hw_addr_set(dev->net, addr);
/* start (does not seem to have any effect?) */
ret = cx82310_cmd(dev, CMD_START, false, NULL, 0, NULL, 0);
......
......@@ -1044,8 +1044,7 @@ static int kaweth_probe(
goto err_all_but_rxbuf;
memcpy(netdev->broadcast, &bcast_addr, sizeof(bcast_addr));
memcpy(netdev->dev_addr, &kaweth->configuration.hw_addr,
sizeof(kaweth->configuration.hw_addr));
eth_hw_addr_set(netdev, (u8 *)&kaweth->configuration.hw_addr);
netdev->netdev_ops = &kaweth_netdev_ops;
netdev->watchdog_timeo = KAWETH_TX_TIMEOUT;
......
......@@ -473,17 +473,19 @@ static const struct net_device_ops mcs7830_netdev_ops = {
static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
{
struct net_device *net = dev->net;
u8 addr[ETH_ALEN];
int ret;
int retry;
/* Initial startup: Gather MAC address setting from EEPROM */
ret = -EINVAL;
for (retry = 0; retry < 5 && ret; retry++)
ret = mcs7830_hif_get_mac_address(dev, net->dev_addr);
ret = mcs7830_hif_get_mac_address(dev, addr);
if (ret) {
dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
goto out;
}
eth_hw_addr_set(net, addr);
mcs7830_data_set_multicast(net);
......
......@@ -669,6 +669,7 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
0x00, 0x00, SIERRA_NET_HIP_MSYNC_ID, 0x00};
static const u8 shdwn_tmplate[sizeof(priv->shdwn_msg)] = {
0x00, 0x00, SIERRA_NET_HIP_SHUTD_ID, 0x00};
u8 mod[2];
dev_dbg(&dev->udev->dev, "%s", __func__);
......@@ -698,8 +699,9 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->netdev_ops = &sierra_net_device_ops;
/* change MAC addr to include, ifacenum, and to be unique */
dev->net->dev_addr[ETH_ALEN-2] = atomic_inc_return(&iface_counter);
dev->net->dev_addr[ETH_ALEN-1] = ifacenum;
mod[0] = atomic_inc_return(&iface_counter);
mod[1] = ifacenum;
dev_addr_mod(dev->net, ETH_ALEN - 2, mod, 2);
/* prepare shutdown message template */
memcpy(priv->shdwn_msg, shdwn_tmplate, sizeof(priv->shdwn_msg));
......
......@@ -320,6 +320,7 @@ static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
{
struct net_device *netdev;
struct mii_if_info *mii;
u8 addr[ETH_ALEN];
int ret;
ret = usbnet_get_endpoints(dev, intf);
......@@ -350,11 +351,12 @@ static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
* EEPROM automatically to PAR. In case there is no EEPROM externally,
* a default MAC address is stored in PAR for making chip work properly.
*/
if (sr_read(dev, SR_PAR, ETH_ALEN, netdev->dev_addr) < 0) {
if (sr_read(dev, SR_PAR, ETH_ALEN, addr) < 0) {
netdev_err(netdev, "Error reading MAC address\n");
ret = -ENODEV;
goto out;
}
eth_hw_addr_set(netdev, addr);
/* power up and reset phy */
sr_write_reg(dev, SR_PRR, PRR_PHY_RST);
......
......@@ -731,6 +731,7 @@ static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
struct sr_data *data = (struct sr_data *)&dev->data;
u16 led01_mux, led23_mux;
int ret, embd_phy;
u8 addr[ETH_ALEN];
u32 phyid;
u16 rx_ctl;
......@@ -754,12 +755,12 @@ static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
}
/* Get the MAC address */
ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN,
dev->net->dev_addr);
ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, addr);
if (ret < 0) {
netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
return ret;
}
eth_hw_addr_set(dev->net, addr);
netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr);
/* Initialize MII structure */
......
......@@ -165,12 +165,13 @@ EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
{
u8 addr[ETH_ALEN];
int tmp = -1, ret;
unsigned char buf [13];
ret = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
if (ret == 12)
tmp = hex2bin(dev->net->dev_addr, buf, 6);
tmp = hex2bin(addr, buf, 6);
if (tmp < 0) {
dev_dbg(&dev->udev->dev,
"bad MAC string %d fetch, %d\n", iMACAddress, tmp);
......@@ -178,6 +179,7 @@ int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
ret = -EINVAL;
return ret;
}
eth_hw_addr_set(dev->net, addr);
return 0;
}
EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
......@@ -1726,7 +1728,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
dev->net = net;
strscpy(net->name, "usb%d", sizeof(net->name));
memcpy (net->dev_addr, node_id, sizeof node_id);
eth_hw_addr_set(net, node_id);
/* rx and tx sides can use different message sizes;
* bind() should set rx_urb_size in that case.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment