Commit 26955a7b authored by Bitan Biswas's avatar Bitan Biswas Committed by Wolfram Sang

i2c: tegra: fix alignment and spacing violations

Fix checkpatch.pl alignment and blank line check(s) in i2c-tegra.c
Signed-off-by: default avatarBitan Biswas <bbiswas@nvidia.com>
Reviewed-by: default avatarDmitry Osipenko <digetx@gmail.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 233d0ab6
......@@ -295,7 +295,7 @@ static u32 dvc_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
* to the I2C block inside the DVC block
*/
static unsigned long tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev,
unsigned long reg)
unsigned long reg)
{
if (i2c_dev->is_dvc)
reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40;
......@@ -303,7 +303,7 @@ static unsigned long tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev,
}
static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
unsigned long reg)
unsigned long reg)
{
writel(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
......@@ -318,13 +318,13 @@ static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
}
static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
unsigned long reg, int len)
unsigned long reg, int len)
{
writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
}
static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
unsigned long reg, int len)
unsigned long reg, int len)
{
readsl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
}
......@@ -669,10 +669,11 @@ static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
if (in_interrupt())
err = readl_poll_timeout_atomic(addr, val, val == 0,
1000, I2C_CONFIG_LOAD_TIMEOUT);
1000,
I2C_CONFIG_LOAD_TIMEOUT);
else
err = readl_poll_timeout(addr, val, val == 0,
1000, I2C_CONFIG_LOAD_TIMEOUT);
err = readl_poll_timeout(addr, val, val == 0, 1000,
I2C_CONFIG_LOAD_TIMEOUT);
if (err) {
dev_warn(i2c_dev->dev,
......@@ -1013,7 +1014,8 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
}
static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
struct i2c_msg *msg, enum msg_end_type end_state)
struct i2c_msg *msg,
enum msg_end_type end_state)
{
u32 packet_header;
u32 int_mask;
......@@ -1150,9 +1152,8 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
if (err)
return err;
time_left = wait_for_completion_timeout(
&i2c_dev->dma_complete,
msecs_to_jiffies(xfer_time));
time_left = wait_for_completion_timeout(&i2c_dev->dma_complete,
msecs_to_jiffies(xfer_time));
if (time_left == 0) {
dev_err(i2c_dev->dev, "DMA transfer timeout\n");
dmaengine_terminate_sync(i2c_dev->msg_read ?
......@@ -1214,7 +1215,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
}
static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
int num)
int num)
{
struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
int i;
......@@ -1260,14 +1261,15 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
{
struct device_node *np = i2c_dev->dev->of_node;
int ret;
bool multi_mode;
ret = of_property_read_u32(np, "clock-frequency",
&i2c_dev->bus_clk_rate);
&i2c_dev->bus_clk_rate);
if (ret)
i2c_dev->bus_clk_rate = 100000; /* default clock rate */
i2c_dev->is_multimaster_mode = of_property_read_bool(np,
"multi-master");
multi_mode = of_property_read_bool(np, "multi-master");
i2c_dev->is_multimaster_mode = multi_mode;
}
static const struct i2c_algorithm tegra_i2c_algo = {
......@@ -1611,7 +1613,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
}
ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
goto release_dma;
......@@ -1680,6 +1682,7 @@ static const struct dev_pm_ops tegra_i2c_pm = {
SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
NULL)
};
#define TEGRA_I2C_PM (&tegra_i2c_pm)
#else
#define TEGRA_I2C_PM NULL
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment