HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend

There's a Cirque touchpad that wakes system up without anything touched
the touchpad. The input report is empty when this happens.
The reason is stated in HID over I2C spec, 7.2.8.2:
"If the DEVICE wishes to wake the HOST from its low power state, it can
issue a wake by asserting the interrupt."

This is fine if OS can put system back to suspend by identifying input
wakeup count stays the same on resume, like Chrome OS Dark Resume [0].
But for regular distro such policy is lacking.

Though the change doesn't bring any impact on power consumption for
touchpad is minimal, other i2c-hid device may depends on SLEEP control
power. So use a quirk to limit the change scope.

[0] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/power_manager/docs/dark_resume.mdSigned-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

drivers/hid/hid-ids.h

@@ -298,6 +298,9 @@
 
 #define USB_VENDOR_ID_CIDC		0x1677
 
+#define I2C_VENDOR_ID_CIRQUE           0x0488
+#define I2C_PRODUCT_ID_CIRQUE_1063     0x1063
+
 #define USB_VENDOR_ID_CJTOUCH		0x24b8
 #define USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0020	0x0020
 #define USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0040	0x0040

drivers/hid/i2c-hid/i2c-hid-core.c

@@ -49,6 +49,7 @@
 #define I2C_HID_QUIRK_RESET_ON_RESUME		BIT(2)
 #define I2C_HID_QUIRK_BAD_INPUT_SIZE		BIT(3)
 #define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET	BIT(4)
+#define I2C_HID_QUIRK_NO_SLEEP_ON_SUSPEND	BIT(5)
 
 /* Command opcodes */
 #define I2C_HID_OPCODE_RESET			0x01
@@ -131,6 +132,8 @@ static const struct i2c_hid_quirks {
 		 I2C_HID_QUIRK_RESET_ON_RESUME },
 	{ USB_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_LENOVO_LEGION_Y720,
 		I2C_HID_QUIRK_BAD_INPUT_SIZE },
+	{ I2C_VENDOR_ID_CIRQUE, I2C_PRODUCT_ID_CIRQUE_1063,
+		I2C_HID_QUIRK_NO_SLEEP_ON_SUSPEND },
 	/*
 	 * Sending the wakeup after reset actually break ELAN touchscreen controller
 	 */
@@ -956,7 +959,8 @@ static int i2c_hid_core_suspend(struct i2c_hid *ihid, bool force_poweroff)
 		return ret;
 
 	/* Save some power */
-	i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);
+	if (!(ihid->quirks & I2C_HID_QUIRK_NO_SLEEP_ON_SUSPEND))
+		i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);
 
 	disable_irq(client->irq);