Commit 270809a8 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: adl_pci6208: split the digital i/o subdevice

The PCI-6208/6216 cards have 4 digital inputs and 4 digital outputs.
These are currently being handled by an 8 channel COMEDI_SUBD_DIO
subdevice in this driver. This causes the 4 digital outputs to
appear as channels 0 thru 3 and the 4 digital inputs to appear as
channels 4 thru 7. Userspace can only work out part thisby doing the
COMEDI_INSNLIST ioctl with the INSN_CONFIG_DIO_QUERY instruction
for each channel to determine the io direction.

Make things a bit cleaner for userspace by creating two subdevices
instead. One for the 4 digital inputs and one for the 4 digital
outputs. For both subdevices the channel number indicates the
actual digital input/output signal.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 0a1e6c1f
......@@ -125,46 +125,41 @@ static int pci6208_ao_rinsn(struct comedi_device *dev,
return insn->n;
}
static int pci6208_dio_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
static int pci6208_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int mask = data[0] & PCI6208_DIO_DO_MASK;
unsigned int val;
val = inw(dev->iobase + PCI6208_DIO);
val = (val & PCI6208_DIO_DI_MASK) >> PCI6208_DIO_DI_SHIFT;
data[1] = val;
return insn->n;
}
static int pci6208_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int mask = data[0];
unsigned int bits = data[1];
if (mask) {
s->state &= ~mask;
s->state |= bits & mask;
s->state |= (bits & mask);
outw(s->state, dev->iobase + PCI6208_DIO);
}
s->state = inw(dev->iobase + PCI6208_DIO);
data[1] = s->state;
return insn->n;
}
static int pci6208_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
int chan = CR_CHAN(insn->chanspec);
unsigned int mask = 1 << chan;
switch (data[0]) {
case INSN_CONFIG_DIO_QUERY:
data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
break;
default:
return -EINVAL;
}
return insn->n;
}
static const void *pci6208_find_boardinfo(struct comedi_device *dev,
struct pci_dev *pcidev)
{
......@@ -185,6 +180,7 @@ static int pci6208_attach_pci(struct comedi_device *dev,
const struct pci6208_board *boardinfo;
struct pci6208_private *devpriv;
struct comedi_subdevice *s;
unsigned int val;
int ret;
comedi_set_hw_dev(dev, &pcidev->dev);
......@@ -208,7 +204,7 @@ static int pci6208_attach_pci(struct comedi_device *dev,
}
dev->iobase = pci_resource_start(pcidev, 2);
ret = comedi_alloc_subdevices(dev, 2);
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
return ret;
......@@ -223,17 +219,31 @@ static int pci6208_attach_pci(struct comedi_device *dev,
s->insn_read = pci6208_ao_rinsn;
s = dev->subdevices + 1;
/* digital i/o subdevice */
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->n_chan = 8;
/* digital input subdevice */
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = 4;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pci6208_dio_insn_bits;
s->insn_config = pci6208_dio_insn_config;
s->insn_bits = pci6208_di_insn_bits;
s = dev->subdevices + 2;
/* digital output subdevice */
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 4;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = pci6208_do_insn_bits;
/*
* Get the read back signals from the digital outputs
* and save it as the initial state for the subdevice.
*/
val = inw(dev->iobase + PCI6208_DIO);
val = (val & PCI6208_DIO_DO_MASK) >> PCI6208_DIO_DO_SHIFT;
s->state = val;
s->io_bits = 0x0f;
s->state = inw(dev->iobase + PCI6208_DIO);
dev_info(dev->class_dev, "%s: %s, I/O base=0x%04lx\n",
dev->driver->driver_name, dev->board_name, dev->iobase);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment