docs: hwmon: coretemp: convert to ReST format

Convert coretemp to ReST format, in order to allow it to
be parsed by Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Documentation/hwmon/coretemp

@@ -3,20 +3,29 @@ Kernel driver coretemp
 
 Supported chips:
   * All Intel Core family
+
     Prefix: 'coretemp'
-    CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
-                              0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
-                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
-                              0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
-                              0x36 (Cedar Trail Atom)
-    Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
-               Volume 3A: System Programming Guide
-               http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
+
+    CPUID: family 0x6, models
+
+			    - 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
+			    - 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
+			    - 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
+			    - 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
+			    - 0x36 (Cedar Trail Atom)
+
+    Datasheet:
+
+	       Intel 64 and IA-32 Architectures Software Developer's Manual
+	       Volume 3A: System Programming Guide
+
+	       http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
 
 Author: Rudolf Marek
 
 Description
 -----------
+
 This driver permits reading the DTS (Digital Temperature Sensor) embedded
 inside Intel CPUs. This driver can read both the per-core and per-package
 temperature using the appropriate sensors. The per-package sensor is new;
@@ -35,14 +44,17 @@ may be raised, if the temperature grows enough (more than TjMax) to trigger
 the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
 
 All Sysfs entries are named with their core_id (represented here by 'X').
-tempX_input	 - Core temperature (in millidegrees Celsius).
-tempX_max	 - All cooling devices should be turned on (on Core2).
-tempX_crit	 - Maximum junction temperature (in millidegrees Celsius).
-tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
-		   Correct CPU operation is no longer guaranteed.
-tempX_label	 - Contains string "Core X", where X is processor
-		   number. For Package temp, this will be "Physical id Y",
-		   where Y is the package number.
+
+================= ========================================================
+tempX_input	  Core temperature (in millidegrees Celsius).
+tempX_max	  All cooling devices should be turned on (on Core2).
+tempX_crit	  Maximum junction temperature (in millidegrees Celsius).
+tempX_crit_alarm  Set when Out-of-spec bit is set, never clears.
+		  Correct CPU operation is no longer guaranteed.
+tempX_label	  Contains string "Core X", where X is processor
+		  number. For Package temp, this will be "Physical id Y",
+		  where Y is the package number.
+================= ========================================================
 
 On CPU models which support it, TjMax is read from a model-specific register.
 On other models, it is set to an arbitrary value based on weak heuristics.
@@ -52,6 +64,7 @@ as a module parameter (tjmax).
 Appendix A. Known TjMax lists (TBD):
 Some information comes from ark.intel.com
 
+=============== =============================================== ================
 Process		Processor					TjMax(C)
 
 22nm		Core i5/i7 Processors
@@ -179,3 +192,4 @@ Process		Processor					TjMax(C)
 65nm		Celeron Processors
 		T1700/1600					100
 		560/550/540/530					100
+=============== =============================================== ================