drivers: edac: Add EDAC driver support for QCOM SoCs

Add error reporting driver for Single Bit Errors (SBEs) and Double Bit
Errors (DBEs). As of now, this driver supports error reporting for
Last Level Cache Controller (LLCC) of Tag RAM and Data RAM. Interrupts
are triggered when the errors happen in the cache, the driver handles
those interrupts and dumps the syndrome registers.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Co-developed-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

MAINTAINERS

@@ -5346,6 +5346,14 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/ti_edac.c
 
+EDAC-QCOM
+M:	Channagoud Kadabi <ckadabi@codeaurora.org>
+M:	Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
+L:	linux-arm-msm@vger.kernel.org
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	drivers/edac/qcom_edac.c
+
 EDIROL UA-101/UA-1000 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

drivers/edac/Kconfig

@@ -460,4 +460,18 @@ config EDAC_TI
 	  Support for error detection and correction on the
           TI SoCs.
 
+config EDAC_QCOM
+	tristate "QCOM EDAC Controller"
+	depends on ARCH_QCOM && QCOM_LLCC
+	help
+	  Support for error detection and correction on the
+	  Qualcomm Technologies, Inc. SoCs.
+
+	  This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs).
+	  As of now, it supports error reporting for Last Level Cache Controller (LLCC)
+	  of Tag RAM and Data RAM.
+
+	  For debugging issues having to do with stability and overall system
+	  health, you should probably say 'Y' here.
+
 endif # EDAC

drivers/edac/Makefile

@@ -77,3 +77,4 @@ obj-$(CONFIG_EDAC_ALTERA)		+= altera_edac.o
 obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
 obj-$(CONFIG_EDAC_XGENE)		+= xgene_edac.o
 obj-$(CONFIG_EDAC_TI)			+= ti_edac.o
+obj-$(CONFIG_EDAC_QCOM)			+= qcom_edac.o

include/linux/soc/qcom/llcc-qcom.h

@@ -93,6 +93,30 @@ struct llcc_drv_data {
 	int ecc_irq;
 };
 
+/**
+ * llcc_edac_reg_data - llcc edac registers data for each error type
+ * @name: Name of the error
+ * @synd_reg: Syndrome register address
+ * @count_status_reg: Status register address to read the error count
+ * @ways_status_reg: Status register address to read the error ways
+ * @reg_cnt: Number of registers
+ * @count_mask: Mask value to get the error count
+ * @ways_mask: Mask value to get the error ways
+ * @count_shift: Shift value to get the error count
+ * @ways_shift: Shift value to get the error ways
+ */
+struct llcc_edac_reg_data {
+	char *name;
+	u64 synd_reg;
+	u64 count_status_reg;
+	u64 ways_status_reg;
+	u32 reg_cnt;
+	u32 count_mask;
+	u32 ways_mask;
+	u8  count_shift;
+	u8  ways_shift;
+};
+
 #if IS_ENABLED(CONFIG_QCOM_LLCC)
 /**
  * llcc_slice_getd - get llcc slice descriptor