Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...

Documentation/devicetree/bindings/arm/spear-timer.txt

+* SPEAr ARM Timer
+
+** Timer node required properties:
+
+- compatible : Should be:
+	"st,spear-timer"
+- reg: Address range of the timer registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupt: Should contain the timer interrupt number
+
+Example:
+
+	timer@f0000000 {
+		compatible = "st,spear-timer";
+		reg = <0xf0000000 0x400>;
+		interrupts = <2>;
+	};

MAINTAINERS

@@ -1905,6 +1905,16 @@ F:	Documentation/filesystems/coda.txt
 F:	fs/coda/
 F:	include/linux/coda*.h
 
+COMMON CLK FRAMEWORK
+M:	Mike Turquette <mturquette@ti.com>
+M:	Mike Turquette <mturquette@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV)
+T:	git git://git.linaro.org/people/mturquette/linux.git
+S:	Maintained
+F:	drivers/clk/clk.c
+F:	drivers/clk/clk-*
+F:	include/linux/clk-pr*
+
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
 L:	linux-cifs@vger.kernel.org
@@ -6368,9 +6378,7 @@ L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
-F:	arch/arm/mach-spear*/clock.c
-F:	arch/arm/plat-spear/clock.c
-F:	arch/arm/plat-spear/include/plat/clock.h
+F:	drivers/clk/spear/
 
 SPI SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>

arch/arm/Kconfig

@@ -456,6 +456,7 @@ config ARCH_MXS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select HAVE_CLK_PREPARE
 	select PINCTRL
 	help
@@ -947,6 +948,7 @@ config PLAT_SPEAR
 	select ARM_AMBA
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
@@ -1101,6 +1103,7 @@ config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select COMMON_CLK
 
 config PLAT_PXA
 	bool

arch/arm/boot/dts/spear300-evb.dts

@@ -87,6 +87,31 @@ sdhci@70000000 {
 
 		smi: flash@fc000000 {
 			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
 		};
 
 		spi0: spi@d0100000 {

arch/arm/boot/dts/spear310-evb.dts

@@ -103,11 +103,27 @@ smi: flash@fc000000 {
 			clock-rate=<50000000>;
 
 			flash@f8000000 {
-				label = "m25p64";
-				reg = <0xf8000000 0x800000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
 				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
 			};
 		};
 

arch/arm/boot/dts/spear320-evb.dts

@@ -110,6 +110,31 @@ sdhci@70000000 {
 
 		smi: flash@fc000000 {
 			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
 		};
 
 		spi0: spi@d0100000 {

arch/arm/boot/dts/spear3xx.dtsi

@@ -139,6 +139,12 @@ wdt@fc880000 {
 				interrupts = <12>;
 				status = "disabled";
 			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <2>;
+			};
 		};
 	};
 };

arch/arm/boot/dts/spear600-evb.dts

@@ -33,6 +33,35 @@ gmac: ethernet@e0800000 {
 			status = "okay";
 		};
 
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x40000>;
+				};
+				partition@50000 {
+					label = "linux";
+					reg = <0x50000 0x2c0000>;
+				};
+				partition@310000 {
+					label = "rootfs";
+					reg = <0x310000 0x4f0000>;
+				};
+			};
+		};
+
 		apb {
 			serial@d0000000 {
 				status = "okay";

arch/arm/boot/dts/spear600.dtsi

@@ -177,6 +177,12 @@ i2c@d0200000 {
 				interrupts = <28>;
 				status = "disabled";
 			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <16>;
+			};
 		};
 	};
 };

arch/arm/configs/spear3xx_defconfig

@@ -14,6 +14,9 @@ CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
@@ -73,6 +76,7 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m

arch/arm/configs/spear6xx_defconfig

@@ -8,11 +8,13 @@ CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR6XX=y
-CONFIG_BOARD_SPEAR600_DT=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
@@ -64,6 +66,7 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m

arch/arm/mach-dove/common.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
 #include <asm/page.h>
@@ -67,6 +67,19 @@ void __init dove_map_io(void)
 	iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
 }
 
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
+				       get_tclk());
+
+	orion_clkdev_init(tclk);
+}
+
 /*****************************************************************************
  * EHCI0
  ****************************************************************************/
@@ -89,8 +102,7 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
-			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
-			0, get_tclk());
+			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM, 0);
 }
 
 /*****************************************************************************
@@ -116,7 +128,7 @@ void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
 void __init dove_uart0_init(void)
 {
 	orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE,
-			 IRQ_DOVE_UART_0, get_tclk());
+			 IRQ_DOVE_UART_0, tclk);
 }
 
 /*****************************************************************************
@@ -125,7 +137,7 @@ void __init dove_uart0_init(void)
 void __init dove_uart1_init(void)
 {
 	orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE,
-			 IRQ_DOVE_UART_1, get_tclk());
+			 IRQ_DOVE_UART_1, tclk);
 }
 
 /*****************************************************************************
@@ -134,7 +146,7 @@ void __init dove_uart1_init(void)
 void __init dove_uart2_init(void)
 {
 	orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE,
-			 IRQ_DOVE_UART_2, get_tclk());
+			 IRQ_DOVE_UART_2, tclk);
 }
 
 /*****************************************************************************
@@ -143,7 +155,7 @@ void __init dove_uart2_init(void)
 void __init dove_uart3_init(void)
 {
 	orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE,
-			 IRQ_DOVE_UART_3, get_tclk());
+			 IRQ_DOVE_UART_3, tclk);
 }
 
 /*****************************************************************************
@@ -151,12 +163,12 @@ void __init dove_uart3_init(void)
  ****************************************************************************/
 void __init dove_spi0_init(void)
 {
-	orion_spi_init(DOVE_SPI0_PHYS_BASE, get_tclk());
+	orion_spi_init(DOVE_SPI0_PHYS_BASE);
 }
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE);
 }
 
 /*****************************************************************************
@@ -272,18 +284,17 @@ void __init dove_sdio1_init(void)
 
 void __init dove_init(void)
 {
-	int tclk;
-
-	tclk = get_tclk();
-
 	printk(KERN_INFO "Dove 88AP510 SoC, ");
-	printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+	printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
 
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init();
 #endif
 	dove_setup_cpu_mbus();
 
+	/* Setup root of clk tree */
+	clk_init();
+
 	/* internal devices that every board has */
 	dove_rtc_init();
 	dove_xor0_init();

arch/arm/mach-dove/dove-db-setup.c

@@ -20,7 +20,6 @@
 #include <linux/i2c.h>
 #include <linux/pci.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/spi/flash.h>
 #include <linux/gpio.h>
 #include <asm/mach-types.h>

arch/arm/mach-imx/Kconfig

@@ -34,6 +34,7 @@ config ARCH_MX53
 config SOC_IMX1
 	bool
 	select ARCH_MX1
+	select COMMON_CLK
 	select CPU_ARM920T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -42,12 +43,14 @@ config SOC_IMX21
 	bool
 	select MACH_MX21
 	select CPU_ARM926T
+	select COMMON_CLK
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
 config SOC_IMX25
 	bool
 	select ARCH_MX25
+	select COMMON_CLK
 	select CPU_ARM926T
 	select ARCH_MXC_IOMUX_V3
 	select MXC_AVIC
@@ -56,6 +59,7 @@ config SOC_IMX27
 	bool
 	select MACH_MX27
 	select CPU_ARM926T
+	select COMMON_CLK
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
@@ -64,12 +68,14 @@ config SOC_IMX31
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
+	select COMMON_CLK
 	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
 	select CPU_V6
 	select ARCH_MXC_IOMUX_V3
+	select COMMON_CLK
 	select HAVE_EPIT
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
@@ -77,6 +83,7 @@ config SOC_IMX35
 config SOC_IMX5
 	select CPU_V7
 	select MXC_TZIC
+	select COMMON_CLK
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_HAS_CPUFREQ
 	select ARCH_MX5
@@ -815,6 +822,7 @@ config SOC_IMX6Q
 	bool "i.MX6 Quad support"
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
+	select COMMON_CLK
 	select CPU_V7
 	select HAVE_ARM_SCU
 	select HAVE_IMX_GPC

arch/arm/mach-imx/Makefile

-obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
 
-obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
 
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
+obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
+			    clk-pfd.o clk-busy.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -70,7 +73,7 @@ obj-$(CONFIG_CPU_V7) += head-v7.o
 AFLAGS_head-v7.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o

arch/arm/mach-imx/clk-busy.c

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+static int clk_busy_wait(void __iomem *reg, u8 shift)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+	while (readl_relaxed(reg) & (1 << shift))
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+	return 0;
+}
+
+struct clk_busy_divider {
+	struct clk_divider div;
+	const struct clk_ops *div_ops;
+	void __iomem *reg;
+	u8 shift;
+};
+
+static inline struct clk_busy_divider *to_clk_busy_divider(struct clk_hw *hw)
+{
+	struct clk_divider *div = container_of(hw, struct clk_divider, hw);
+
+	return container_of(div, struct clk_busy_divider, div);
+}
+
+static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+	return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate);
+}
+
+static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long *prate)
+{
+	struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+	return busy->div_ops->round_rate(&busy->div.hw, rate, prate);
+}
+
+static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+	int ret;
+
+	ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate);
+	if (!ret)
+		ret = clk_busy_wait(busy->reg, busy->shift);
+
+	return ret;
+}
+
+static struct clk_ops clk_busy_divider_ops = {
+	.recalc_rate = clk_busy_divider_recalc_rate,
+	.round_rate = clk_busy_divider_round_rate,
+	.set_rate = clk_busy_divider_set_rate,
+};
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+				 void __iomem *reg, u8 shift, u8 width,
+				 void __iomem *busy_reg, u8 busy_shift)
+{
+	struct clk_busy_divider *busy;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+	if (!busy)
+		return ERR_PTR(-ENOMEM);
+
+	busy->reg = busy_reg;
+	busy->shift = busy_shift;
+
+	busy->div.reg = reg;
+	busy->div.shift = shift;
+	busy->div.width = width;
+	busy->div.lock = &imx_ccm_lock;
+	busy->div_ops = &clk_divider_ops;
+
+	init.name = name;
+	init.ops = &clk_busy_divider_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	busy->div.hw.init = &init;
+
+	clk = clk_register(NULL, &busy->div.hw);
+	if (!clk)
+		kfree(busy);
+
+	return clk;
+}
+
+struct clk_busy_mux {
+	struct clk_mux mux;
+	const struct clk_ops *mux_ops;
+	void __iomem *reg;
+	u8 shift;
+};
+
+static inline struct clk_busy_mux *to_clk_busy_mux(struct clk_hw *hw)
+{
+	struct clk_mux *mux = container_of(hw, struct clk_mux, hw);
+
+	return container_of(mux, struct clk_busy_mux, mux);
+}
+
+static u8 clk_busy_mux_get_parent(struct clk_hw *hw)
+{
+	struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+
+	return busy->mux_ops->get_parent(&busy->mux.hw);
+}
+
+static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+	int ret;
+
+	ret = busy->mux_ops->set_parent(&busy->mux.hw, index);
+	if (!ret)
+		ret = clk_busy_wait(busy->reg, busy->shift);
+
+	return ret;
+}
+
+struct clk_ops clk_busy_mux_ops = {
+	.get_parent = clk_busy_mux_get_parent,
+	.set_parent = clk_busy_mux_set_parent,
+};
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+			     u8 width, void __iomem *busy_reg, u8 busy_shift,
+			     const char **parent_names, int num_parents)
+{
+	struct clk_busy_mux *busy;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+	if (!busy)
+		return ERR_PTR(-ENOMEM);
+
+	busy->reg = busy_reg;
+	busy->shift = busy_shift;
+
+	busy->mux.reg = reg;
+	busy->mux.shift = shift;
+	busy->mux.width = width;
+	busy->mux.lock = &imx_ccm_lock;
+	busy->mux_ops = &clk_mux_ops;
+
+	init.name = name;
+	init.ops = &clk_busy_mux_ops;
+	init.flags = 0;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	busy->mux.hw.init = &init;
+
+	clk = clk_register(NULL, &busy->mux.hw);
+	if (IS_ERR(clk))
+		kfree(busy);
+
+	return clk;
+}

arch/arm/mach-imx/clk-gate2.c

+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+/**
+ * DOC: basic gatable clock which can gate and ungate it's ouput
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gating
+ * rate - inherits rate from parent.  No clk_set_rate support
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int clk_gate2_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 reg;
+	unsigned long flags = 0;
+
+	if (gate->lock)
+		spin_lock_irqsave(gate->lock, flags);
+
+	reg = readl(gate->reg);
+	reg |= 3 << gate->bit_idx;
+	writel(reg, gate->reg);
+
+	if (gate->lock)
+		spin_unlock_irqrestore(gate->lock, flags);
+
+	return 0;
+}
+
+static void clk_gate2_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 reg;
+	unsigned long flags = 0;
+
+	if (gate->lock)
+		spin_lock_irqsave(gate->lock, flags);
+
+	reg = readl(gate->reg);
+	reg &= ~(3 << gate->bit_idx);
+	writel(reg, gate->reg);
+
+	if (gate->lock)
+		spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+	u32 reg;
+	struct clk_gate *gate = to_clk_gate(hw);
+
+	reg = readl(gate->reg);
+
+	if (((reg >> gate->bit_idx) & 3) == 3)
+		return 1;
+
+	return 0;
+}
+
+static struct clk_ops clk_gate2_ops = {
+	.enable = clk_gate2_enable,
+	.disable = clk_gate2_disable,
+	.is_enabled = clk_gate2_is_enabled,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate2_flags, spinlock_t *lock)
+{
+	struct clk_gate *gate;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	/* struct clk_gate assignments */
+	gate->reg = reg;
+	gate->bit_idx = bit_idx;
+	gate->flags = clk_gate2_flags;
+	gate->lock = lock;
+
+	init.name = name;
+	init.ops = &clk_gate2_ops;
+	init.flags = flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	gate->hw.init = &init;
+
+	clk = clk_register(dev, &gate->hw);
+	if (IS_ERR(clk))
+		kfree(clk);
+
+	return clk;
+}

arch/arm/mach-imx/clk-imx1.c

+/*
+ *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include "clk.h"
+
+/* CCM register addresses */
+#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+#define CCM_CSCR	IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
+#define CCM_PCDR	IO_ADDR_CCM(0x20)
+
+/* SCM register addresses */
+#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+#define SCM_GCCR	IO_ADDR_SCM(0xc)
+
+static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
+static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem",
+				"fclk", };
+enum imx1_clks {
+	dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu,
+	fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate,
+	mma_gate, usbd_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx1_clocks_init(unsigned long fref)
+{
+	int i;
+
+	clk[dummy] = imx_clk_fixed("dummy", 0);
+	clk[clk32] = imx_clk_fixed("clk32", fref);
+	clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
+	clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+	clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+	clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
+			ARRAY_SIZE(prem_sel_clks));
+	clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+	clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+	clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+	clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1);
+	clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4);
+	clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3);
+	clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4);
+	clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4);
+	clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7);
+	clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
+			ARRAY_SIZE(clko_sel_clks));
+	clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4);
+	clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+	clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+	clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("imx1 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma");
+	clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
+	clk_register_clkdev(clk[mma_gate], "mma", NULL);
+	clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
+	clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
+	clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
+	clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
+	clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
+	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
+	clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
+	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
+	clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
+	clk_register_clkdev(clk[per2], "per", "imx-fb.0");
+	clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0");
+	clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[hclk], "mshc", NULL);
+	clk_register_clkdev(clk[per3], "ssi", NULL);
+	clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
+	clk_register_clkdev(clk[clko], "clko", NULL);
+
+	mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+			MX1_TIM1_INT);
+
+	return 0;
+}

arch/arm/mach-imx/clk-imx21.c

+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include "clk.h"
+
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+static const char *mpll_sel_clks[] = { "fpm", "ckih", };
+static const char *spll_sel_clks[] = { "fpm", "ckih", };
+
+enum imx21_clks {
+	ckil, ckih, fpm, mpll_sel, spll_sel, mpll, spll, fclk, hclk, ipg, per1,
+	per2, per3, per4, uart1_ipg_gate, uart2_ipg_gate, uart3_ipg_gate,
+	uart4_ipg_gate, gpt1_ipg_gate, gpt2_ipg_gate, gpt3_ipg_gate,
+	pwm_ipg_gate, sdhc1_ipg_gate, sdhc2_ipg_gate, lcdc_ipg_gate,
+	lcdc_hclk_gate, cspi3_ipg_gate, cspi2_ipg_gate, cspi1_ipg_gate,
+	per4_gate, csi_hclk_gate, usb_div, usb_gate, usb_hclk_gate, ssi1_gate,
+	ssi2_gate, nfc_div, nfc_gate, dma_gate, dma_hclk_gate, brom_gate,
+	emma_gate, emma_hclk_gate, slcdc_gate, slcdc_hclk_gate, wdog_gate,
+	gpio_gate, i2c_gate, kpp_gate, owire_gate, rtc_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+	int i;
+
+	clk[ckil] = imx_clk_fixed("ckil", lref);
+	clk[ckih] = imx_clk_fixed("ckih", href);
+	clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+	clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
+			ARRAY_SIZE(mpll_sel_clks));
+	clk[spll_sel] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks,
+			ARRAY_SIZE(spll_sel_clks));
+	clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+	clk[spll] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
+	clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 29, 3);
+	clk[hclk] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+	clk[ipg] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+	clk[per1] = imx_clk_divider("per1", "mpll", CCM_PCDR1, 0, 6);
+	clk[per2] = imx_clk_divider("per2", "mpll", CCM_PCDR1, 8, 6);
+	clk[per3] = imx_clk_divider("per3", "mpll", CCM_PCDR1, 16, 6);
+	clk[per4] = imx_clk_divider("per4", "mpll", CCM_PCDR1, 24, 6);
+	clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+	clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+	clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+	clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+	clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+	clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+	clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+	clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+	clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+	clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+	clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+	clk[lcdc_hclk_gate] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+	clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+	clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+	clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+	clk[per4_gate] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+	clk[csi_hclk_gate] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+	clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 26, 3);
+	clk[usb_gate] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+	clk[usb_hclk_gate] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+	clk[ssi1_gate] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+	clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+	clk[nfc_div] = imx_clk_divider("nfc_div", "ipg", CCM_PCDR0, 12, 4);
+	clk[nfc_gate] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+	clk[dma_gate] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+	clk[dma_hclk_gate] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+	clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+	clk[emma_gate] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+	clk[emma_hclk_gate] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+	clk[slcdc_gate] = imx_clk_gate("slcdc_gate", "ipg", CCM_PCCR0, 25);
+	clk[slcdc_hclk_gate] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+	clk[wdog_gate] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+	clk[gpio_gate] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+	clk[i2c_gate] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+	clk[kpp_gate] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+	clk[owire_gate] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+	clk[rtc_gate] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("i.MX21 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[per1], "per1", NULL);
+	clk_register_clkdev(clk[per2], "per2", NULL);
+	clk_register_clkdev(clk[per3], "per3", NULL);
+	clk_register_clkdev(clk[per4], "per4", NULL);
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[per1], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
+	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
+	clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
+	clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0");
+	clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
+	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
+	clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
+	clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
+	clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
+	clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
+	clk_register_clkdev(clk[per3], "per", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
+	clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
+	clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma");
+	clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma");
+	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
+	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+	clk_register_clkdev(clk[brom_gate], "brom", NULL);
+	clk_register_clkdev(clk[emma_gate], "emma", NULL);
+	clk_register_clkdev(clk[slcdc_gate], "slcdc", NULL);
+	clk_register_clkdev(clk[gpio_gate], "gpio", NULL);
+	clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+	clk_register_clkdev(clk[csi_hclk_gate], "csi", NULL);
+	clk_register_clkdev(clk[ssi1_gate], "ssi1", NULL);
+	clk_register_clkdev(clk[ssi2_gate], "ssi2", NULL);
+	clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
+	clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
+
+	mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
+	return 0;
+}

arch/arm/mach-imx/clk-imx31.c

+/*
+ * Copyright (C) 2012 Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/mx31.h>
+#include <mach/common.h>
+
+#include "clk.h"
+#include "crmregs-imx3.h"
+
+static const char *mcu_main_sel[] = { "spll", "mpll", };
+static const char *per_sel[] = { "per_div", "ipg", };
+static const char *csi_sel[] = { "upll", "spll", };
+static const char *fir_sel[] = { "mcu_main", "upll", "spll" };
+
+enum mx31_clks {
+	ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg, per_div,
+	per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
+	fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate,
+	iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate,
+	uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate,
+	mstick1_gate, mstick2_gate, csi_gate, rtc_gate, wdog_gate, pwm_gate,
+	sim_gate, ect_gate, usb_gate, kpp_gate, ipu_gate, uart3_gate,
+	uart4_gate, uart5_gate, owire_gate, ssi2_gate, cspi1_gate, cspi2_gate,
+	gacc_gate, emi_gate, rtic_gate, firi_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+	void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
+	int i;
+
+	clk[ckih] = imx_clk_fixed("ckih", fref);
+	clk[ckil] = imx_clk_fixed("ckil", 32768);
+	clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL);
+	clk[spll] = imx_clk_pllv1("spll", "ckih", base + MXC_CCM_SRPCTL);
+	clk[upll] = imx_clk_pllv1("upll", "ckih", base + MXC_CCM_UPCTL);
+	clk[mcu_main] = imx_clk_mux("mcu_main", base + MXC_CCM_PMCR0, 31, 1, mcu_main_sel, ARRAY_SIZE(mcu_main_sel));
+	clk[hsp] = imx_clk_divider("hsp", "mcu_main", base + MXC_CCM_PDR0, 11, 3);
+	clk[ahb] = imx_clk_divider("ahb", "mcu_main", base + MXC_CCM_PDR0, 3, 3);
+	clk[nfc] = imx_clk_divider("nfc", "ahb", base + MXC_CCM_PDR0, 8, 3);
+	clk[ipg] = imx_clk_divider("ipg", "ahb", base + MXC_CCM_PDR0, 6, 2);
+	clk[per_div] = imx_clk_divider("per_div", "upll", base + MXC_CCM_PDR0, 16, 5);
+	clk[per] = imx_clk_mux("per", base + MXC_CCM_CCMR, 24, 1, per_sel, ARRAY_SIZE(per_sel));
+	clk[csi] = imx_clk_mux("csi_sel", base + MXC_CCM_CCMR, 25, 1, csi_sel, ARRAY_SIZE(csi_sel));
+	clk[fir] = imx_clk_mux("fir_sel", base + MXC_CCM_CCMR, 11, 2, fir_sel, ARRAY_SIZE(fir_sel));
+	clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MXC_CCM_PDR0, 23, 9);
+	clk[usb_div_pre] = imx_clk_divider("usb_div_pre", "upll", base + MXC_CCM_PDR1, 30, 2);
+	clk[usb_div_post] = imx_clk_divider("usb_div_post", "usb_div_pre", base + MXC_CCM_PDR1, 27, 3);
+	clk[fir_div_pre] = imx_clk_divider("fir_div_pre", "fir_sel", base + MXC_CCM_PDR1, 24, 3);
+	clk[fir_div_post] = imx_clk_divider("fir_div_post", "fir_div_pre", base + MXC_CCM_PDR1, 23, 6);
+	clk[sdhc1_gate] = imx_clk_gate2("sdhc1_gate", "per", base + MXC_CCM_CGR0, 0);
+	clk[sdhc2_gate] = imx_clk_gate2("sdhc2_gate", "per", base + MXC_CCM_CGR0, 2);
+	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per", base + MXC_CCM_CGR0, 4);
+	clk[epit1_gate] = imx_clk_gate2("epit1_gate", "per", base + MXC_CCM_CGR0, 6);
+	clk[epit2_gate] = imx_clk_gate2("epit2_gate", "per", base + MXC_CCM_CGR0, 8);
+	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MXC_CCM_CGR0, 10);
+	clk[ata_gate] = imx_clk_gate2("ata_gate", "ipg", base + MXC_CCM_CGR0, 12);
+	clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MXC_CCM_CGR0, 14);
+	clk[cspi3_gate] = imx_clk_gate2("cspi3_gate", "ipg", base + MXC_CCM_CGR0, 16);
+	clk[rng_gate] = imx_clk_gate2("rng_gate", "ipg", base + MXC_CCM_CGR0, 18);
+	clk[uart1_gate] = imx_clk_gate2("uart1_gate", "per", base + MXC_CCM_CGR0, 20);
+	clk[uart2_gate] = imx_clk_gate2("uart2_gate", "per", base + MXC_CCM_CGR0, 22);
+	clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "spll", base + MXC_CCM_CGR0, 24);
+	clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per", base + MXC_CCM_CGR0, 26);
+	clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per", base + MXC_CCM_CGR0, 28);
+	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per", base + MXC_CCM_CGR0, 30);
+	clk[hantro_gate] = imx_clk_gate2("hantro_gate", "per", base + MXC_CCM_CGR1, 0);
+	clk[mstick1_gate] = imx_clk_gate2("mstick1_gate", "per", base + MXC_CCM_CGR1, 2);
+	clk[mstick2_gate] = imx_clk_gate2("mstick2_gate", "per", base + MXC_CCM_CGR1, 4);
+	clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MXC_CCM_CGR1, 6);
+	clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MXC_CCM_CGR1, 8);
+	clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MXC_CCM_CGR1, 10);
+	clk[pwm_gate] = imx_clk_gate2("pwm_gate", "per", base + MXC_CCM_CGR1, 12);
+	clk[sim_gate] = imx_clk_gate2("sim_gate", "per", base + MXC_CCM_CGR1, 14);
+	clk[ect_gate] = imx_clk_gate2("ect_gate", "per", base + MXC_CCM_CGR1, 16);
+	clk[usb_gate] = imx_clk_gate2("usb_gate", "ahb", base + MXC_CCM_CGR1, 18);
+	clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MXC_CCM_CGR1, 20);
+	clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MXC_CCM_CGR1, 22);
+	clk[uart3_gate] = imx_clk_gate2("uart3_gate", "per", base + MXC_CCM_CGR1, 24);
+	clk[uart4_gate] = imx_clk_gate2("uart4_gate", "per", base + MXC_CCM_CGR1, 26);
+	clk[uart5_gate] = imx_clk_gate2("uart5_gate", "per", base + MXC_CCM_CGR1, 28);
+	clk[owire_gate] = imx_clk_gate2("owire_gate", "per", base + MXC_CCM_CGR1, 30);
+	clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "spll", base + MXC_CCM_CGR2, 0);
+	clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MXC_CCM_CGR2, 2);
+	clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MXC_CCM_CGR2, 4);
+	clk[gacc_gate] = imx_clk_gate2("gacc_gate", "per", base + MXC_CCM_CGR2, 6);
+	clk[emi_gate] = imx_clk_gate2("emi_gate", "ahb", base + MXC_CCM_CGR2, 8);
+	clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
+	clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
+
+	for (i = 0; i < ARRAY_SIZE(clk); i++)
+		if (IS_ERR(clk[i]))
+			pr_err("imx31 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+
+	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+	clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
+	clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1");
+	clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
+	clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
+	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+	clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+	clk_register_clkdev(clk[epit1_gate], "epit", NULL);
+	clk_register_clkdev(clk[epit2_gate], "epit", NULL);
+	clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
+	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+	clk_register_clkdev(clk[kpp_gate], "kpp", NULL);
+	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
+	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+	clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+	/* i.mx31 has the i.mx21 type uart */
+	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+	clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+	clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+	clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
+	clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
+	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
+	clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+	clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+	clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+	clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0");
+	clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1");
+	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
+	clk_register_clkdev(clk[firi_gate], "firi", NULL);
+	clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
+	clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
+	clk_register_clkdev(clk[rng_gate], "rng", NULL);
+	clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
+	clk_register_clkdev(clk[iim_gate], "iim", NULL);
+
+	clk_set_parent(clk[csi], clk[upll]);
+	clk_prepare_enable(clk[emi_gate]);
+	clk_prepare_enable(clk[iim_gate]);
+	mx31_revision();
+	clk_disable_unprepare(clk[iim_gate]);
+
+	mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+			MX31_INT_GPT);
+
+	return 0;
+}

arch/arm/mach-imx/clk-pfd.c

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/**
+ * struct clk_pfd - IMX PFD clock
+ * @clk_hw:	clock source
+ * @reg:	PFD register address
+ * @idx:	the index of PFD encoded in the register
+ *
+ * PFD clock found on i.MX6 series.  Each register for PFD has 4 clk_pfd
+ * data encoded, and member idx is used to specify the one.  And each
+ * register has SET, CLR and TOG registers at offset 0x4 0x8 and 0xc.
+ */
+struct clk_pfd {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		idx;
+};
+
+#define to_clk_pfd(_hw) container_of(_hw, struct clk_pfd, hw)
+
+#define SET	0x4
+#define CLR	0x8
+#define OTG	0xc
+
+static int clk_pfd_enable(struct clk_hw *hw)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+
+	writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + CLR);
+
+	return 0;
+}
+
+static void clk_pfd_disable(struct clk_hw *hw)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+
+	writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + SET);
+}
+
+static unsigned long clk_pfd_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+	u64 tmp = parent_rate;
+	u8 frac = (readl_relaxed(pfd->reg) >> (pfd->idx * 8)) & 0x3f;
+
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static long clk_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	u64 tmp = *prate;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	if (frac < 12)
+		frac = 12;
+	else if (frac > 35)
+		frac = 35;
+	tmp = *prate;
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int clk_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pfd *pfd = to_clk_pfd(hw);
+	u64 tmp = parent_rate;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	if (frac < 12)
+		frac = 12;
+	else if (frac > 35)
+		frac = 35;
+
+	writel_relaxed(0x3f << (pfd->idx * 8), pfd->reg + CLR);
+	writel_relaxed(frac << (pfd->idx * 8), pfd->reg + SET);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pfd_ops = {
+	.enable		= clk_pfd_enable,
+	.disable	= clk_pfd_disable,
+	.recalc_rate	= clk_pfd_recalc_rate,
+	.round_rate	= clk_pfd_round_rate,
+	.set_rate	= clk_pfd_set_rate,
+};
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+			void __iomem *reg, u8 idx)
+{
+	struct clk_pfd *pfd;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
+	if (!pfd)
+		return ERR_PTR(-ENOMEM);
+
+	pfd->reg = reg;
+	pfd->idx = idx;
+
+	init.name = name;
+	init.ops = &clk_pfd_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pfd->hw.init = &init;
+
+	clk = clk_register(NULL, &pfd->hw);
+	if (IS_ERR(clk))
+		kfree(pfd);
+
+	return clk;
+}

arch/arm/mach-imx/clk-pllv1.c

+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/clock.h>
+#include "clk.h"
+
+/**
+ * pll v1
+ *
+ * @clk_hw	clock source
+ * @parent	the parent clock name
+ * @base	base address of pll registers
+ *
+ * PLL clock version 1, found on i.MX1/21/25/27/31/35
+ */
+struct clk_pllv1 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+#define to_clk_pllv1(clk) (container_of(clk, struct clk_pllv1, clk))
+
+static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_pllv1 *pll = to_clk_pllv1(hw);
+
+	return mxc_decode_pll(readl(pll->base), parent_rate);
+}
+
+struct clk_ops clk_pllv1_ops = {
+	.recalc_rate = clk_pllv1_recalc_rate,
+};
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+		void __iomem *base)
+{
+	struct clk_pllv1 *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kmalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->base = base;
+
+	init.name = name;
+	init.ops = &clk_pllv1_ops;
+	init.flags = 0;
+	init.parent_names = &parent;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}

arch/arm/mach-imx/clk-pllv2.c

+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/div64.h>
+
+#include "clk.h"
+
+#define to_clk_pllv2(clk) (container_of(clk, struct clk_pllv2, clk))
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_MFNMINUS		0x14
+#define MXC_PLL_DP_MFNPLUS		0x18
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+#define MXC_PLL_DP_MFN_TOGC		0x28
+#define MXC_PLL_DP_DESTAT		0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL		0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET	12
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK	(3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET	8
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_CONFIG_BIST		0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE	0x4
+#define MXC_PLL_DP_CONFIG_AREN		0x2
+#define MXC_PLL_DP_CONFIG_LDREQ		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		(0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0x0
+#define MXC_PLL_DP_MFN_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS	(1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN	(1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET	0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK	0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL	(1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN		0x07FFFFFF
+
+#define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
+
+struct clk_pllv2 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+	void __iomem *pllbase;
+	s64 temp;
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+	pllbase = pll->base;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+	if (pll_hfsm == 0) {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+	} else {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	/* Sign extend to 32-bits */
+	if (mfn >= 0x04000000) {
+		mfn |= 0xFC000000;
+		mfn_abs = -mfn;
+	}
+
+	ref_clk = 2 * parent_rate;
+	if (dbl != 0)
+		ref_clk *= 2;
+
+	ref_clk /= (pdf + 1);
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd + 1);
+	if (mfn < 0)
+		temp = -temp;
+	temp = (ref_clk * mfi) + temp;
+
+	return temp;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	u32 reg;
+	void __iomem *pllbase;
+	long mfi, pdf, mfn, mfd = 999999;
+	s64 temp64;
+	unsigned long quad_parent_rate;
+	unsigned long pll_hfsm, dp_ctl;
+
+	pllbase = pll->base;
+
+	quad_parent_rate = 4 * parent_rate;
+	pdf = mfi = -1;
+	while (++pdf < 16 && mfi < 5)
+		mfi = rate * (pdf+1) / quad_parent_rate;
+	if (mfi > 15)
+		return -EINVAL;
+	pdf--;
+
+	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+	do_div(temp64, quad_parent_rate/1000000);
+	mfn = (long)temp64;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	/* use dpdck0_2 */
+	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	if (pll_hfsm == 0) {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+	} else {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+
+	return 0;
+}
+
+static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	return rate;
+}
+
+static int clk_pllv2_prepare(struct clk_hw *hw)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	u32 reg;
+	void __iomem *pllbase;
+	int i = 0;
+
+	pllbase = pll->base;
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+		if (reg & MXC_PLL_DP_CTL_LRF)
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: pll locking failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void clk_pllv2_unprepare(struct clk_hw *hw)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	u32 reg;
+	void __iomem *pllbase;
+
+	pllbase = pll->base;
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+struct clk_ops clk_pllv2_ops = {
+	.prepare = clk_pllv2_prepare,
+	.unprepare = clk_pllv2_unprepare,
+	.recalc_rate = clk_pllv2_recalc_rate,
+	.round_rate = clk_pllv2_round_rate,
+	.set_rate = clk_pllv2_set_rate,
+};
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+		void __iomem *base)
+{
+	struct clk_pllv2 *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->base = base;
+
+	init.name = name;
+	init.ops = &clk_pllv2_ops;
+	init.flags = 0;
+	init.parent_names = &parent;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}

arch/arm/mach-imx/clk-pllv3.c

+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define PLL_NUM_OFFSET		0x10
+#define PLL_DENOM_OFFSET	0x20
+
+#define BM_PLL_POWER		(0x1 << 12)
+#define BM_PLL_ENABLE		(0x1 << 13)
+#define BM_PLL_BYPASS		(0x1 << 16)
+#define BM_PLL_LOCK		(0x1 << 31)
+
+/**
+ * struct clk_pllv3 - IMX PLL clock version 3
+ * @clk_hw:	 clock source
+ * @base:	 base address of PLL registers
+ * @powerup_set: set POWER bit to power up the PLL
+ * @gate_mask:	 mask of gate bits
+ * @div_mask:	 mask of divider bits
+ *
+ * IMX PLL clock version 3, found on i.MX6 series.  Divider for pllv3
+ * is actually a multiplier, and always sits at bit 0.
+ */
+struct clk_pllv3 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+	bool		powerup_set;
+	u32		gate_mask;
+	u32		div_mask;
+};
+
+#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
+
+static int clk_pllv3_prepare(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val &= ~BM_PLL_BYPASS;
+	if (pll->powerup_set)
+		val |= BM_PLL_POWER;
+	else
+		val &= ~BM_PLL_POWER;
+	writel_relaxed(val, pll->base);
+
+	/* Wait for PLL to lock */
+	while (!(readl_relaxed(pll->base) & BM_PLL_LOCK))
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void clk_pllv3_unprepare(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val |= BM_PLL_BYPASS;
+	if (pll->powerup_set)
+		val &= ~BM_PLL_POWER;
+	else
+		val |= BM_PLL_POWER;
+	writel_relaxed(val, pll->base);
+}
+
+static int clk_pllv3_enable(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val |= pll->gate_mask;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static void clk_pllv3_disable(struct clk_hw *hw)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->gate_mask;
+	writel_relaxed(val, pll->base);
+}
+
+static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = readl_relaxed(pll->base)  & pll->div_mask;
+
+	return (div == 1) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+
+	return (rate >= parent_rate * 22) ? parent_rate * 22 :
+					    parent_rate * 20;
+}
+
+static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val, div;
+
+	if (rate == parent_rate * 22)
+		div = 1;
+	else if (rate == parent_rate * 20)
+		div = 0;
+	else
+		return -EINVAL;
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_recalc_rate,
+	.round_rate	= clk_pllv3_round_rate,
+	.set_rate	= clk_pllv3_set_rate,
+};
+
+static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+	return parent_rate * div / 2;
+}
+
+static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	unsigned long min_rate = parent_rate * 54 / 2;
+	unsigned long max_rate = parent_rate * 108 / 2;
+	u32 div;
+
+	if (rate > max_rate)
+		rate = max_rate;
+	else if (rate < min_rate)
+		rate = min_rate;
+	div = rate * 2 / parent_rate;
+
+	return parent_rate * div / 2;
+}
+
+static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long min_rate = parent_rate * 54 / 2;
+	unsigned long max_rate = parent_rate * 108 / 2;
+	u32 val, div;
+
+	if (rate < min_rate || rate > max_rate)
+		return -EINVAL;
+
+	div = rate * 2 / parent_rate;
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_sys_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_sys_recalc_rate,
+	.round_rate	= clk_pllv3_sys_round_rate,
+	.set_rate	= clk_pllv3_sys_set_rate,
+};
+
+static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
+	u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+	return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	unsigned long min_rate = parent_rate * 27;
+	unsigned long max_rate = parent_rate * 54;
+	u32 div;
+	u32 mfn, mfd = 1000000;
+	s64 temp64;
+
+	if (rate > max_rate)
+		rate = max_rate;
+	else if (rate < min_rate)
+		rate = min_rate;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	do_div(temp64, parent_rate);
+	mfn = temp64;
+
+	return parent_rate * div + parent_rate / mfd * mfn;
+}
+
+static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	unsigned long min_rate = parent_rate * 27;
+	unsigned long max_rate = parent_rate * 54;
+	u32 val, div;
+	u32 mfn, mfd = 1000000;
+	s64 temp64;
+
+	if (rate < min_rate || rate > max_rate)
+		return -EINVAL;
+
+	div = rate / parent_rate;
+	temp64 = (u64) (rate - div * parent_rate);
+	temp64 *= mfd;
+	do_div(temp64, parent_rate);
+	mfn = temp64;
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+	writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
+	writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_av_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_av_recalc_rate,
+	.round_rate	= clk_pllv3_av_round_rate,
+	.set_rate	= clk_pllv3_av_set_rate,
+};
+
+static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+	switch (div) {
+	case 0:
+		return 25000000;
+	case 1:
+		return 50000000;
+	case 2:
+		return 100000000;
+	case 3:
+		return 125000000;
+	}
+
+	return 0;
+}
+
+static long clk_pllv3_enet_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *prate)
+{
+	if (rate >= 125000000)
+		rate = 125000000;
+	else if (rate >= 100000000)
+		rate = 100000000;
+	else if (rate >= 50000000)
+		rate = 50000000;
+	else
+		rate = 25000000;
+	return rate;
+}
+
+static int clk_pllv3_enet_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv3 *pll = to_clk_pllv3(hw);
+	u32 val, div;
+
+	switch (rate) {
+	case 25000000:
+		div = 0;
+		break;
+	case 50000000:
+		div = 1;
+		break;
+	case 100000000:
+		div = 2;
+		break;
+	case 125000000:
+		div = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = readl_relaxed(pll->base);
+	val &= ~pll->div_mask;
+	val |= div;
+	writel_relaxed(val, pll->base);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pllv3_enet_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+	.recalc_rate	= clk_pllv3_enet_recalc_rate,
+	.round_rate	= clk_pllv3_enet_round_rate,
+	.set_rate	= clk_pllv3_enet_set_rate,
+};
+
+static const struct clk_ops clk_pllv3_mlb_ops = {
+	.prepare	= clk_pllv3_prepare,
+	.unprepare	= clk_pllv3_unprepare,
+	.enable		= clk_pllv3_enable,
+	.disable	= clk_pllv3_disable,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+			  const char *parent_name, void __iomem *base,
+			  u32 gate_mask, u32 div_mask)
+{
+	struct clk_pllv3 *pll;
+	const struct clk_ops *ops;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	switch (type) {
+	case IMX_PLLV3_SYS:
+		ops = &clk_pllv3_sys_ops;
+		break;
+	case IMX_PLLV3_USB:
+		ops = &clk_pllv3_ops;
+		pll->powerup_set = true;
+		break;
+	case IMX_PLLV3_AV:
+		ops = &clk_pllv3_av_ops;
+		break;
+	case IMX_PLLV3_ENET:
+		ops = &clk_pllv3_enet_ops;
+		break;
+	case IMX_PLLV3_MLB:
+		ops = &clk_pllv3_mlb_ops;
+		break;
+	default:
+		ops = &clk_pllv3_ops;
+	}
+	pll->base = base;
+	pll->gate_mask = gate_mask;
+	pll->div_mask = div_mask;
+
+	init.name = name;
+	init.ops = ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}

arch/arm/mach-imx/clk.h

+#ifndef __MACH_IMX_CLK_H
+#define __MACH_IMX_CLK_H
+
+#include <linux/spinlock.h>
+#include <linux/clk-provider.h>
+#include <mach/clock.h>
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+		void __iomem *base);
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+		void __iomem *base);
+
+enum imx_pllv3_type {
+	IMX_PLLV3_GENERIC,
+	IMX_PLLV3_SYS,
+	IMX_PLLV3_USB,
+	IMX_PLLV3_AV,
+	IMX_PLLV3_ENET,
+	IMX_PLLV3_MLB,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+		const char *parent_name, void __iomem *base, u32 gate_mask,
+		u32 div_mask);
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate_flags, spinlock_t *lock);
+
+static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
+		void __iomem *reg, u8 shift)
+{
+	return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+			shift, 0, &imx_ccm_lock);
+}
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+		void __iomem *reg, u8 idx);
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+				 void __iomem *reg, u8 shift, u8 width,
+				 void __iomem *busy_reg, u8 busy_shift);
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+			     u8 width, void __iomem *busy_reg, u8 busy_shift,
+			     const char **parent_names, int num_parents);
+
+static inline struct clk *imx_clk_fixed(const char *name, int rate)
+{
+	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static inline struct clk *imx_clk_divider(const char *name, const char *parent,
+		void __iomem *reg, u8 shift, u8 width)
+{
+	return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+			reg, shift, width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_gate(const char *name, const char *parent,
+		void __iomem *reg, u8 shift)
+{
+	return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+			shift, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
+		u8 shift, u8 width, const char **parents, int num_parents)
+{
+	return clk_register_mux(NULL, name, parents, num_parents, 0, reg, shift,
+			width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_fixed_factor(const char *name,
+		const char *parent, unsigned int mult, unsigned int div)
+{
+	return clk_register_fixed_factor(NULL, name, parent,
+			CLK_SET_RATE_PARENT, mult, div);
+}
+
+#endif

arch/arm/mach-imx/crmregs-imx3.h

@@ -24,48 +24,47 @@
 #define CKIH_CLK_FREQ_27MHZ     27000000
 #define CKIL_CLK_FREQ           32768
 
-#define MXC_CCM_BASE		(cpu_is_mx31() ? \
-MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) : MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR))
+extern void __iomem *mx3_ccm_base;
 
 /* Register addresses */
-#define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)
-#define MXC_CCM_PDR0		(MXC_CCM_BASE + 0x04)
-#define MXC_CCM_PDR1		(MXC_CCM_BASE + 0x08)
-#define MX35_CCM_PDR2		(MXC_CCM_BASE + 0x0C)
-#define MXC_CCM_RCSR		(MXC_CCM_BASE + 0x0C)
-#define MX35_CCM_PDR3		(MXC_CCM_BASE + 0x10)
-#define MXC_CCM_MPCTL		(MXC_CCM_BASE + 0x10)
-#define MX35_CCM_PDR4		(MXC_CCM_BASE + 0x14)
-#define MXC_CCM_UPCTL		(MXC_CCM_BASE + 0x14)
-#define MX35_CCM_RCSR		(MXC_CCM_BASE + 0x18)
-#define MXC_CCM_SRPCTL		(MXC_CCM_BASE + 0x18)
-#define MX35_CCM_MPCTL		(MXC_CCM_BASE + 0x1C)
-#define MXC_CCM_COSR		(MXC_CCM_BASE + 0x1C)
-#define MX35_CCM_PPCTL		(MXC_CCM_BASE + 0x20)
-#define MXC_CCM_CGR0		(MXC_CCM_BASE + 0x20)
-#define MX35_CCM_ACMR		(MXC_CCM_BASE + 0x24)
-#define MXC_CCM_CGR1		(MXC_CCM_BASE + 0x24)
-#define MX35_CCM_COSR		(MXC_CCM_BASE + 0x28)
-#define MXC_CCM_CGR2		(MXC_CCM_BASE + 0x28)
-#define MX35_CCM_CGR0		(MXC_CCM_BASE + 0x2C)
-#define MXC_CCM_WIMR		(MXC_CCM_BASE + 0x2C)
-#define MX35_CCM_CGR1		(MXC_CCM_BASE + 0x30)
-#define MXC_CCM_LDC		(MXC_CCM_BASE + 0x30)
-#define MX35_CCM_CGR2		(MXC_CCM_BASE + 0x34)
-#define MXC_CCM_DCVR0		(MXC_CCM_BASE + 0x34)
-#define MX35_CCM_CGR3		(MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR1		(MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR2		(MXC_CCM_BASE + 0x3C)
-#define MXC_CCM_DCVR3		(MXC_CCM_BASE + 0x40)
-#define MXC_CCM_LTR0		(MXC_CCM_BASE + 0x44)
-#define MXC_CCM_LTR1		(MXC_CCM_BASE + 0x48)
-#define MXC_CCM_LTR2		(MXC_CCM_BASE + 0x4C)
-#define MXC_CCM_LTR3		(MXC_CCM_BASE + 0x50)
-#define MXC_CCM_LTBR0		(MXC_CCM_BASE + 0x54)
-#define MXC_CCM_LTBR1		(MXC_CCM_BASE + 0x58)
-#define MXC_CCM_PMCR0		(MXC_CCM_BASE + 0x5C)
-#define MXC_CCM_PMCR1		(MXC_CCM_BASE + 0x60)
-#define MXC_CCM_PDR2		(MXC_CCM_BASE + 0x64)
+#define MXC_CCM_CCMR		0x00
+#define MXC_CCM_PDR0		0x04
+#define MXC_CCM_PDR1		0x08
+#define MX35_CCM_PDR2		0x0C
+#define MXC_CCM_RCSR		0x0C
+#define MX35_CCM_PDR3		0x10
+#define MXC_CCM_MPCTL		0x10
+#define MX35_CCM_PDR4		0x14
+#define MXC_CCM_UPCTL		0x14
+#define MX35_CCM_RCSR		0x18
+#define MXC_CCM_SRPCTL		0x18
+#define MX35_CCM_MPCTL		0x1C
+#define MXC_CCM_COSR		0x1C
+#define MX35_CCM_PPCTL		0x20
+#define MXC_CCM_CGR0		0x20
+#define MX35_CCM_ACMR		0x24
+#define MXC_CCM_CGR1		0x24
+#define MX35_CCM_COSR		0x28
+#define MXC_CCM_CGR2		0x28
+#define MX35_CCM_CGR0		0x2C
+#define MXC_CCM_WIMR		0x2C
+#define MX35_CCM_CGR1		0x30
+#define MXC_CCM_LDC		0x30
+#define MX35_CCM_CGR2		0x34
+#define MXC_CCM_DCVR0		0x34
+#define MX35_CCM_CGR3		0x38
+#define MXC_CCM_DCVR1		0x38
+#define MXC_CCM_DCVR2		0x3C
+#define MXC_CCM_DCVR3		0x40
+#define MXC_CCM_LTR0		0x44
+#define MXC_CCM_LTR1		0x48
+#define MXC_CCM_LTR2		0x4C
+#define MXC_CCM_LTR3		0x50
+#define MXC_CCM_LTBR0		0x54
+#define MXC_CCM_LTBR1		0x58
+#define MXC_CCM_PMCR0		0x5C
+#define MXC_CCM_PMCR1		0x60
+#define MXC_CCM_PDR2		0x64
 
 /* Register bit definitions */
 #define MXC_CCM_CCMR_WBEN                       (1 << 27)