Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "This series contains:
   - Exynos s5p-mfc driver got support for VP8 encoder
   - Some SoC drivers gained support for asynchronous registration
     (needed for DT)
   - The RC subsystem gained support for RC activity LED;
   - New drivers added: a video decoder(adv7842), a video encoder
     (adv7511), a new GSPCA driver (stk1135) and support for Renesas
     R-Car (vsp1)
   - the first SDR kernel driver: mirics msi3101.  Due to some troubles
     with the driver, and because the API is still under discussion, it
     will be merged at staging for 3.12.  Need to rework on it
   - usual new boards additions, fixes, cleanups and driver
     improvements"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits)
  [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0
  [media] exynos4-is: Fix entity unregistration on error path
  [media] exynos-gsc: Register v4l2 device
  [media] exynos4-is: Fix fimc-lite bayer formats
  [media] em28xx: fix assignment of the eeprom data
  [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()
  [media] usbtv: Throw corrupted frames away
  [media] usbtv: Fix deinterlacing
  [media] v4l2: added missing mutex.h include to v4l2-ctrls.h
  [media] DocBook: upgrade media_api DocBook version to 4.2
  [media] ml86v7667: fix compile warning: 'ret' set but not used
  [media] s5p-g2d: Fix registration failure
  [media] media: coda: Fix DT driver data pointer for i.MX27
  [media] s5p-mfc: Fix input/output format reporting
  [media] v4l: vsp1: Fix mutex double lock at streamon time
  [media] v4l: vsp1: Add support for RT clock
  [media] v4l: vsp1: Initialize media device bus_info field
  [media] davinci: vpif_capture: fix error return code in vpif_probe()
  [media] davinci: vpif_display: fix error return code in vpif_probe()
  [media] MAINTAINERS: add entries for adv7511 and adv7842
  ...

Documentation/DocBook/media/v4l/controls.xml

@@ -722,17 +722,22 @@ for more details.</para>
     </section>
 
     <section id="mpeg-controls">
-      <title>MPEG Control Reference</title>
+      <title>Codec Control Reference</title>
 
-      <para>Below all controls within the MPEG control class are
+      <para>Below all controls within the Codec control class are
 described. First the generic controls, then controls specific for
 certain hardware.</para>
 
+      <para>Note: These controls are applicable to all codecs and
+not just MPEG. The defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG
+as the controls were originally made for MPEG codecs and later
+extended to cover all encoding formats.</para>
+
       <section>
-	<title>Generic MPEG Controls</title>
+	<title>Generic Codec Controls</title>
 
 	<table pgwide="1" frame="none" id="mpeg-control-id">
-	  <title>MPEG Control IDs</title>
+	  <title>Codec Control IDs</title>
 	  <tgroup cols="4">
 	    <colspec colname="c1" colwidth="1*" />
 	    <colspec colname="c2" colwidth="6*" />
@@ -752,7 +757,7 @@ certain hardware.</para>
 	      <row>
 		<entry spanname="id"><constant>V4L2_CID_MPEG_CLASS</constant>&nbsp;</entry>
 		<entry>class</entry>
-	      </row><row><entry spanname="descr">The MPEG class
+	      </row><row><entry spanname="descr">The Codec class
 descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a
 description of this control class. This description can be used as the
 caption of a Tab page in a GUI, for example.</entry>
@@ -3009,6 +3014,159 @@ in by the application. 0 = do not insert, 1 = insert packets.</entry>
 	  </tgroup>
 	</table>
       </section>
+
+    <section>
+      <title>VPX Control Reference</title>
+
+      <para>The VPX controls include controls for encoding parameters
+      of VPx video codec.</para>
+
+      <table pgwide="1" frame="none" id="vpx-control-id">
+      <title>VPX Control IDs</title>
+
+      <tgroup cols="4">
+        <colspec colname="c1" colwidth="1*" />
+        <colspec colname="c2" colwidth="6*" />
+        <colspec colname="c3" colwidth="2*" />
+        <colspec colname="c4" colwidth="6*" />
+        <spanspec namest="c1" nameend="c2" spanname="id" />
+        <spanspec namest="c2" nameend="c4" spanname="descr" />
+        <thead>
+          <row>
+            <entry spanname="id" align="left">ID</entry>
+            <entry align="left">Type</entry>
+          </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+          </row>
+        </thead>
+        <tbody valign="top">
+          <row><entry></entry></row>
+
+	      <row><entry></entry></row>
+	      <row id="v4l2-vpx-num-partitions">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS</constant></entry>
+		<entry>enum v4l2_vp8_num_partitions</entry>
+	      </row>
+	      <row><entry spanname="descr">The number of token partitions to use in VP8 encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION</constant></entry>
+		      <entry>1 coefficient partition</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS</constant></entry>
+		      <entry>2 coefficient partitions</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS</constant></entry>
+		      <entry>4 coefficient partitions</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS</constant></entry>
+		      <entry>8 coefficient partitions</entry>
+	            </row>
+                  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4</constant></entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">Setting this prevents intra 4x4 mode in the intra mode decision.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row id="v4l2-vpx-num-ref-frames">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES</constant></entry>
+		<entry>enum v4l2_vp8_num_ref_frames</entry>
+	      </row>
+	      <row><entry spanname="descr">The number of reference pictures for encoding P frames.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME</constant></entry>
+		      <entry>Last encoded frame will be searched</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME</constant></entry>
+		      <entry>Two frames will be searched among the last encoded frame, the golden frame
+and the alternate reference (altref) frame. The encoder implementation will decide which two are chosen.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME</constant></entry>
+		      <entry>The last encoded frame, the golden frame and the altref frame will be searched.</entry>
+		    </row>
+                  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL</constant></entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Indicates the loop filter level. The adjustment of the loop
+filter level is done via a delta value against a baseline loop filter value.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS</constant></entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">This parameter affects the loop filter. Anything above
+zero weakens the deblocking effect on the loop filter.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD</constant></entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Sets the refresh period for the golden frame. The period is defined
+in number of frames. For a value of 'n', every nth frame starting from the first key frame will be taken as a golden frame.
+For eg. for encoding sequence of 0, 1, 2, 3, 4, 5, 6, 7 where the golden frame refresh period is set as 4, the frames
+0, 4, 8 etc will be taken as the golden frames as frame 0 is always a key frame.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row id="v4l2-vpx-golden-frame-sel">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL</constant></entry>
+		<entry>enum v4l2_vp8_golden_frame_sel</entry>
+	      </row>
+	      <row><entry spanname="descr">Selects the golden frame for encoding.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV</constant></entry>
+		      <entry>Use the (n-2)th frame as a golden frame, current frame index being 'n'.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD</constant></entry>
+		      <entry>Use the previous specific frame indicated by
+V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD as a golden frame.</entry>
+		    </row>
+                  </tbody>
+		</entrytbl>
+	      </row>
+
+          <row><entry></entry></row>
+        </tbody>
+      </tgroup>
+      </table>
+
+      </section>
     </section>
 
     <section id="camera-controls">

Documentation/DocBook/media/v4l/lirc_device_interface.xml

@@ -46,7 +46,9 @@ describing an IR signal are read from the chardev.</para>
 values. Pulses and spaces are only marked implicitly by their position. The
 data must start and end with a pulse, therefore, the data must always include
 an uneven number of samples. The write function must block until the data has
-been transmitted by the hardware.</para>
+been transmitted by the hardware. If more data is provided than the hardware
+can send, the driver returns EINVAL.</para>
+
 </section>
 
 <section id="lirc_ioctl">

Documentation/DocBook/media/v4l/pixfmt-nv16m.xml

+    <refentry>
+      <refmeta>
+	<refentrytitle>V4L2_PIX_FMT_NV16M ('NM16'), V4L2_PIX_FMT_NV61M ('NM61')</refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname id="V4L2-PIX-FMT-NV16M"><constant>V4L2_PIX_FMT_NV16M</constant></refname>
+	<refname id="V4L2-PIX-FMT-NV61M"><constant>V4L2_PIX_FMT_NV61M</constant></refname>
+	<refpurpose>Variation of <constant>V4L2_PIX_FMT_NV16</constant> and <constant>V4L2_PIX_FMT_NV61</constant> with planes
+	  non contiguous in memory. </refpurpose>
+      </refnamediv>
+      <refsect1>
+	<title>Description</title>
+
+	<para>This is a multi-planar, two-plane version of the YUV 4:2:0 format.
+The three components are separated into two sub-images or planes.
+<constant>V4L2_PIX_FMT_NV16M</constant> differs from <constant>V4L2_PIX_FMT_NV16
+</constant> in that the two planes are non-contiguous in memory, i.e. the chroma
+plane does not necessarily immediately follows the luma plane.
+The luminance data occupies the first plane. The Y plane has one byte per pixel.
+In the second plane there is chrominance data with alternating chroma samples.
+The CbCr plane is the same width and height, in bytes, as the Y plane.
+Each CbCr pair belongs to four pixels. For example,
+Cb<subscript>0</subscript>/Cr<subscript>0</subscript> belongs to
+Y'<subscript>00</subscript>, Y'<subscript>01</subscript>,
+Y'<subscript>10</subscript>, Y'<subscript>11</subscript>.
+<constant>V4L2_PIX_FMT_NV61M</constant> is the same as <constant>V4L2_PIX_FMT_NV16M</constant>
+except the Cb and Cr bytes are swapped, the CrCb plane starts with a Cr byte.</para>
+
+	<para><constant>V4L2_PIX_FMT_NV16M</constant> and
+<constant>V4L2_PIX_FMT_NV61M</constant> are intended to be used only in drivers
+and applications that support the multi-planar API, described in
+<xref linkend="planar-apis"/>. </para>
+
+	<example>
+	  <title><constant>V4L2_PIX_FMT_NV16M</constant> 4 &times; 4 pixel image</title>
+
+	  <formalpara>
+	    <title>Byte Order.</title>
+	    <para>Each cell is one byte.
+		<informaltable frame="none">
+		<tgroup cols="5" align="center">
+		  <colspec align="left" colwidth="2*" />
+		  <tbody valign="top">
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;0:</entry>
+		      <entry>Y'<subscript>00</subscript></entry>
+		      <entry>Y'<subscript>01</subscript></entry>
+		      <entry>Y'<subscript>02</subscript></entry>
+		      <entry>Y'<subscript>03</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;4:</entry>
+		      <entry>Y'<subscript>10</subscript></entry>
+		      <entry>Y'<subscript>11</subscript></entry>
+		      <entry>Y'<subscript>12</subscript></entry>
+		      <entry>Y'<subscript>13</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;8:</entry>
+		      <entry>Y'<subscript>20</subscript></entry>
+		      <entry>Y'<subscript>21</subscript></entry>
+		      <entry>Y'<subscript>22</subscript></entry>
+		      <entry>Y'<subscript>23</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;12:</entry>
+		      <entry>Y'<subscript>30</subscript></entry>
+		      <entry>Y'<subscript>31</subscript></entry>
+		      <entry>Y'<subscript>32</subscript></entry>
+		      <entry>Y'<subscript>33</subscript></entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;0:</entry>
+		      <entry>Cb<subscript>00</subscript></entry>
+		      <entry>Cr<subscript>00</subscript></entry>
+		      <entry>Cb<subscript>02</subscript></entry>
+		      <entry>Cr<subscript>02</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;4:</entry>
+		      <entry>Cb<subscript>10</subscript></entry>
+		      <entry>Cr<subscript>10</subscript></entry>
+		      <entry>Cb<subscript>12</subscript></entry>
+		      <entry>Cr<subscript>12</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;8:</entry>
+		      <entry>Cb<subscript>20</subscript></entry>
+		      <entry>Cr<subscript>20</subscript></entry>
+		      <entry>Cb<subscript>22</subscript></entry>
+		      <entry>Cr<subscript>22</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;12:</entry>
+		      <entry>Cb<subscript>30</subscript></entry>
+		      <entry>Cr<subscript>30</subscript></entry>
+		      <entry>Cb<subscript>32</subscript></entry>
+		      <entry>Cr<subscript>32</subscript></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	  </formalpara>
+
+	  <formalpara>
+	    <title>Color Sample Location.</title>
+	    <para>
+		<informaltable frame="none">
+		<tgroup cols="7" align="center">
+		  <tbody valign="top">
+		    <row>
+		      <entry></entry>
+		      <entry>0</entry><entry></entry><entry>1</entry><entry></entry>
+		      <entry>2</entry><entry></entry><entry>3</entry>
+		    </row>
+		    <row>
+		      <entry>0</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		    <row>
+		      <entry>1</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		    </row>
+		    <row>
+		      <entry>2</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		    <row>
+		      <entry>3</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	  </formalpara>
+	</example>
+      </refsect1>
+    </refentry>

Documentation/DocBook/media/v4l/pixfmt.xml

@@ -391,9 +391,9 @@ clamp (double x)
 	else               return r;
 }
 
-y1 = (255 / 219.0) * (Y1 - 16);
-pb = (255 / 224.0) * (Cb - 128);
-pr = (255 / 224.0) * (Cr - 128);
+y1 = (Y1 - 16) / 219.0;
+pb = (Cb - 128) / 224.0;
+pr = (Cr - 128) / 224.0;
 
 r = 1.0 * y1 + 0     * pb + 1.402 * pr;
 g = 1.0 * y1 - 0.344 * pb - 0.714 * pr;
@@ -718,6 +718,7 @@ information.</para>
     &sub-nv12m;
     &sub-nv12mt;
     &sub-nv16;
+    &sub-nv16m;
     &sub-nv24;
     &sub-m420;
   </section>

Documentation/DocBook/media/v4l/vidioc-create-bufs.xml

@@ -62,18 +62,29 @@ addition to the <constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter
 control over buffers is required. This ioctl can be called multiple times to
 create buffers of different sizes.</para>
 
-    <para>To allocate device buffers applications initialize relevant fields of
-the <structname>v4l2_create_buffers</structname> structure. They set the
-<structfield>type</structfield> field in the
-&v4l2-format; structure, embedded in this
-structure, to the respective stream or buffer type.
-<structfield>count</structfield> must be set to the number of required buffers.
-<structfield>memory</structfield> specifies the required I/O method. The
-<structfield>format</structfield> field shall typically be filled in using
-either the <constant>VIDIOC_TRY_FMT</constant> or
-<constant>VIDIOC_G_FMT</constant> ioctl(). Additionally, applications can adjust
-<structfield>sizeimage</structfield> fields to fit their specific needs. The
-<structfield>reserved</structfield> array must be zeroed.</para>
+    <para>To allocate the device buffers applications must initialize the
+relevant fields of the <structname>v4l2_create_buffers</structname> structure.
+The <structfield>count</structfield> field must be set to the number of
+requested buffers, the <structfield>memory</structfield> field specifies the
+requested I/O method and the <structfield>reserved</structfield> array must be
+zeroed.</para>
+
+    <para>The <structfield>format</structfield> field specifies the image format
+that the buffers must be able to handle. The application has to fill in this
+&v4l2-format;. Usually this will be done using the
+<constant>VIDIOC_TRY_FMT</constant> or <constant>VIDIOC_G_FMT</constant> ioctl()
+to ensure that the requested format is supported by the driver. Unsupported
+formats will result in an error.</para>
+
+    <para>The buffers created by this ioctl will have as minimum size the size
+defined by the <structfield>format.pix.sizeimage</structfield> field. If the
+<structfield>format.pix.sizeimage</structfield> field is less than the minimum
+required for the given format, then <structfield>sizeimage</structfield> will be
+increased by the driver to that minimum to allocate the buffers. If it is
+larger, then the value will be used as-is. The same applies to the
+<structfield>sizeimage</structfield> field of the
+<structname>v4l2_plane_pix_format</structname> structure in the case of
+multiplanar formats.</para>
 
     <para>When the ioctl is called with a pointer to this structure the driver
 will attempt to allocate up to the requested number of buffers and store the
@@ -144,9 +155,9 @@ mapped</link> I/O.</para>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The buffer type (<structfield>type</structfield> field) or the
-requested I/O method (<structfield>memory</structfield>) is not
-supported.</para>
+	  <para>The buffer type (<structfield>format.type</structfield> field),
+requested I/O method (<structfield>memory</structfield>) or format
+(<structfield>format</structfield> field) is not valid.</para>
 	</listitem>
       </varlistentry>
     </variablelist>

Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml

@@ -156,19 +156,19 @@ bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_H
 	    <entry>__u32</entry>
 	    <entry><structfield>il_vfrontporch</structfield></entry>
 	    <entry>Vertical front porch in lines for the even field (aka field 2) of
-	    interlaced field formats.</entry>
+	    interlaced field formats. Must be 0 for progressive formats.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>il_vsync</structfield></entry>
 	    <entry>Vertical sync length in lines for the even field (aka field 2) of
-	    interlaced field formats.</entry>
+	    interlaced field formats. Must be 0 for progressive formats.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>il_vbackporch</structfield></entry>
 	    <entry>Vertical back porch in lines for the even field (aka field 2) of
-	    interlaced field formats.</entry>
+	    interlaced field formats. Must be 0 for progressive formats.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>

Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml

@@ -92,8 +92,8 @@ to add them.</para>
 	    <entry>int</entry>
 	    <entry><structfield>quality</structfield></entry>
 	    <entry>Deprecated. If <link linkend="jpeg-quality-control"><constant>
-	    V4L2_CID_JPEG_IMAGE_QUALITY</constant></link> control is exposed by
-	    a driver applications should use it instead and ignore this field.
+	    V4L2_CID_JPEG_COMPRESSION_QUALITY</constant></link> control is exposed
+	    by a driver applications should use it instead and ignore this field.
 	    </entry>
 	  </row>
 	  <row>

Documentation/DocBook/media_api.tmpl

@@ -22,8 +22,14 @@
 
 <!-- LinuxTV v4l-dvb repository. -->
 <!ENTITY v4l-dvb		"<ulink url='http://linuxtv.org/repo/'>http://linuxtv.org/repo/</ulink>">
+<!ENTITY dash-ent-8             "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 <!ENTITY dash-ent-10            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-12            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-14            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 <!ENTITY dash-ent-16            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-20            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-22            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-24            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 ]>
 
 <book id="media_api">

Documentation/devicetree/bindings/media/i2c/adv7343.txt

+* Analog Devices adv7343 video encoder
+
+The ADV7343 are high speed, digital-to-analog video encoders in a 64-lead LQFP
+package. Six high speed, 3.3 V, 11-bit video DACs provide support for composite
+(CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard
+definition (SD), enhanced definition (ED), or high definition (HD) video
+formats.
+
+Required Properties :
+- compatible: Must be "adi,adv7343"
+
+Optional Properties :
+- adi,power-mode-sleep-mode: on enable the current consumption is reduced to
+			      micro ampere level. All DACs and the internal PLL
+			      circuit are disabled.
+- adi,power-mode-pll-ctrl: PLL and oversampling control. This control allows
+			   internal PLL 1 circuit to be powered down and the
+			   oversampling to be switched off.
+- ad,adv7343-power-mode-dac: array configuring the power on/off DAC's 1..6,
+			      0 = OFF and 1 = ON, Default value when this
+			      property is not specified is <0 0 0 0 0 0>.
+- ad,adv7343-sd-config-dac-out: array configure SD DAC Output's 1 and 2, 0 = OFF
+				 and 1 = ON, Default value when this property is
+				 not specified is <0 0>.
+
+Example:
+
+i2c0@1c22000 {
+	...
+	...
+
+	adv7343@2a {
+		compatible = "adi,adv7343";
+		reg = <0x2a>;
+
+		port {
+			adv7343_1: endpoint {
+					adi,power-mode-sleep-mode;
+					adi,power-mode-pll-ctrl;
+					/* Use DAC1..3, DAC6 */
+					adi,dac-enable = <1 1 1 0 0 1>;
+					/* Use SD DAC output 1 */
+					adi,sd-dac-enable = <1 0>;
+			};
+		};
+	};
+	...
+};

Documentation/devicetree/bindings/media/i2c/ths8200.txt

+* Texas Instruments THS8200 video encoder
+
+The ths8200 device is a digital to analog converter used in DVD players, video
+recorders, set-top boxes.
+
+Required Properties :
+- compatible : value must be "ti,ths8200"
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		...
+		ths8200@5c {
+			compatible = "ti,ths8200";
+			reg = <0x5c>;
+		};
+		...
+	};

Documentation/devicetree/bindings/media/i2c/tvp7002.txt

+* Texas Instruments TV7002 video decoder
+
+The TVP7002 device supports digitizing of video and graphics signal in RGB and
+YPbPr color space.
+
+Required Properties :
+- compatible : Must be "ti,tvp7002"
+
+Optional Properties:
+- hsync-active: HSYNC Polarity configuration for the bus. Default value when
+  this property is not specified is <0>.
+
+- vsync-active: VSYNC Polarity configuration for the bus. Default value when
+  this property is not specified is <0>.
+
+- pclk-sample: Clock polarity of the bus. Default value when this property is
+  not specified is <0>.
+
+- sync-on-green-active: Active state of Sync-on-green signal property of the
+  endpoint.
+  0 = Normal Operation (Active Low, Default)
+  1 = Inverted operation
+
+- field-even-active: Active-high Field ID output polarity control of the bus.
+  Under normal operation, the field ID output is set to logic 1 for an odd field
+  (field 1) and set to logic 0 for an even field (field 0).
+  0 = Normal Operation (Active Low, Default)
+  1 = FID output polarity inverted
+
+For further reading of port node refer Documentation/devicetree/bindings/media/
+video-interfaces.txt.
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		...
+		tvp7002@5c {
+			compatible = "ti,tvp7002";
+			reg = <0x5c>;
+
+			port {
+				tvp7002_1: endpoint {
+					hsync-active = <1>;
+					vsync-active = <1>;
+					pclk-sample = <0>;
+					sync-on-green-active = <1>;
+					field-even-active = <0>;
+				};
+			};
+		};
+		...
+	};

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -10,6 +10,7 @@ Required properties:
   - compatible : value should be either one among the following
 	(a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
 	(b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
+	(b) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
 
   - reg : Physical base address of the IP registers and length of memory
 	  mapped region.

Documentation/devicetree/bindings/media/video-interfaces.txt

@@ -88,6 +88,8 @@ Optional endpoint properties
 - field-even-active: field signal level during the even field data transmission.
 - pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
   signal.
+- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for
+  LOW/HIGH respectively.
 - data-lanes: an array of physical data lane indexes. Position of an entry
   determines the logical lane number, while the value of an entry indicates
   physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have

Documentation/video4linux/v4l2-controls.txt

@@ -124,19 +124,13 @@ You add non-menu controls by calling v4l2_ctrl_new_std:
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, s32 min, s32 max, u32 step, s32 def);
 
-Menu controls are added by calling v4l2_ctrl_new_std_menu:
+Menu and integer menu controls are added by calling v4l2_ctrl_new_std_menu:
 
 	struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, s32 max, s32 skip_mask, s32 def);
 
-Or alternatively for integer menu controls, by calling v4l2_ctrl_new_int_menu:
-
-	struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl,
-			const struct v4l2_ctrl_ops *ops,
-			u32 id, s32 max, s32 def, const s64 *qmenu_int);
-
-Standard menu controls with a driver specific menu are added by calling
+Menu controls with a driver specific menu are added by calling
 v4l2_ctrl_new_std_menu_items:
 
        struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(
@@ -144,6 +138,13 @@ v4l2_ctrl_new_std_menu_items:
                        const struct v4l2_ctrl_ops *ops, u32 id, s32 max,
                        s32 skip_mask, s32 def, const char * const *qmenu);
 
+Integer menu controls with a driver specific menu can be added by calling
+v4l2_ctrl_new_int_menu:
+
+	struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 max, s32 def, const s64 *qmenu_int);
+
 These functions are typically called right after the v4l2_ctrl_handler_init:
 
 	static const s64 exp_bias_qmenu[] = {

MAINTAINERS

@@ -580,12 +580,24 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/ad9389b*
 
+ANALOG DEVICES INC ADV7511 DRIVER
+M:	Hans Verkuil <hans.verkuil@cisco.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/i2c/adv7511*
+
 ANALOG DEVICES INC ADV7604 DRIVER
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/adv7604*
 
+ANALOG DEVICES INC ADV7842 DRIVER
+M:	Hans Verkuil <hans.verkuil@cisco.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/i2c/adv7842*
+
 ANALOG DEVICES INC ASOC CODEC DRIVERS
 M:	Lars-Peter Clausen <lars@metafoo.de>
 L:	device-drivers-devel@blackfin.uclinux.org
@@ -639,6 +651,12 @@ S:	Maintained
 F:	drivers/net/appletalk/
 F:	net/appletalk/
 
+APTINA CAMERA SENSOR PLL
+M:	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/i2c/aptina-pll.*
+
 ARASAN COMPACT FLASH PATA CONTROLLER
 M:	Viresh Kumar <viresh.linux@gmail.com>
 L:	linux-ide@vger.kernel.org
@@ -5518,7 +5536,7 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Supported
 F:	drivers/platform/x86/msi-wmi.c
 
-MT9M032 SENSOR DRIVER
+MT9M032 APTINA SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
@@ -5526,7 +5544,7 @@ S:	Maintained
 F:	drivers/media/i2c/mt9m032.c
 F:	include/media/mt9m032.h
 
-MT9P031 SENSOR DRIVER
+MT9P031 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
@@ -5534,7 +5552,7 @@ S:	Maintained
 F:	drivers/media/i2c/mt9p031.c
 F:	include/media/mt9p031.h
 
-MT9T001 SENSOR DRIVER
+MT9T001 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
@@ -5542,7 +5560,7 @@ S:	Maintained
 F:	drivers/media/i2c/mt9t001.c
 F:	include/media/mt9t001.h
 
-MT9V032 SENSOR DRIVER
+MT9V032 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git

arch/arm/configs/bockw_defconfig

@@ -82,6 +82,13 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_I2C=y
 CONFIG_I2C_RCAR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ML86V7667=y
 CONFIG_SPI=y
 CONFIG_SPI_SH_HSPI=y
 CONFIG_USB=y

arch/arm/configs/marzen_defconfig

@@ -84,6 +84,13 @@ CONFIG_GPIO_RCAR=y
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_SSB=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=y
 CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y

arch/arm/mach-davinci/board-da850-evm.c

@@ -1249,12 +1249,10 @@ static struct vpif_capture_config da850_vpif_capture_config = {
 
 static struct adv7343_platform_data adv7343_pdata = {
 	.mode_config = {
-		.dac_3 = 1,
-		.dac_2 = 1,
-		.dac_1 = 1,
+		.dac = { 1, 1, 1 },
 	},
 	.sd_config = {
-		.sd_dac_out1 = 1,
+		.sd_dac_out = { 1 },
 	},
 };
 

arch/arm/mach-shmobile/board-bockw.c

@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +29,7 @@
 #include <linux/smsc911x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <media/soc_camera.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7778.h>
@@ -143,6 +145,25 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_NEEDS_POLL,
 };
 
+static struct rcar_vin_platform_data vin_platform_data __initdata = {
+	.flags	= RCAR_VIN_BT656,
+};
+
+/* In the default configuration both decoders reside on I2C bus 0 */
+#define BOCKW_CAMERA(idx)						\
+static struct i2c_board_info camera##idx##_info = {			\
+	I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)),			\
+};									\
+									\
+static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
+	.bus_id		= idx,						\
+	.i2c_adapter_id	= 0,						\
+	.board_info	= &camera##idx##_info,				\
+}
+
+BOCKW_CAMERA(0);
+BOCKW_CAMERA(1);
+
 static const struct pinctrl_map bockw_pinctrl_map[] = {
 	/* Ether */
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
@@ -174,6 +195,16 @@ static const struct pinctrl_map bockw_pinctrl_map[] = {
 				  "sdhi0_cd", "sdhi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
 				  "sdhi0_wp", "sdhi0"),
+	/* VIN0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
+				  "vin0_clk", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
+				  "vin0_data8", "vin0"),
+	/* VIN1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
+				  "vin1_clk", "vin1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
+				  "vin1_data8", "vin1"),
 };
 
 #define FPGA	0x18200000
@@ -192,6 +223,16 @@ static void __init bockw_init(void)
 	r8a7778_add_i2c_device(0);
 	r8a7778_add_hspi_device(0);
 	r8a7778_add_mmc_device(&sh_mmcif_plat);
+	r8a7778_add_vin_device(0, &vin_platform_data);
+	/* VIN1 has a pin conflict with Ether */
+	if (!IS_ENABLED(CONFIG_SH_ETH))
+		r8a7778_add_vin_device(1, &vin_platform_data);
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
+				      &iclink0_ml86v7667,
+				      sizeof(iclink0_ml86v7667));
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
+				      &iclink1_ml86v7667,
+				      sizeof(iclink1_ml86v7667));
 
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));

arch/arm/mach-shmobile/board-marzen.c

 /*
  * marzen board support
  *
- * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011, 2013  Renesas Solutions Corp.
  * Copyright (C) 2011  Magnus Damm
+ * Copyright (C) 2013  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -37,6 +38,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
+#include <media/soc_camera.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -178,12 +180,40 @@ static struct platform_device leds_device = {
 	},
 };
 
+static struct rcar_vin_platform_data vin_platform_data __initdata = {
+	.flags	= RCAR_VIN_BT656,
+};
+
+#define MARZEN_CAMERA(idx)					\
+static struct i2c_board_info camera##idx##_info = {		\
+	I2C_BOARD_INFO("adv7180", 0x20 + (idx)),		\
+};								\
+								\
+static struct soc_camera_link iclink##idx##_adv7180 = {		\
+	.bus_id		= 1 + 2 * (idx),			\
+	.i2c_adapter_id	= 0,					\
+	.board_info	= &camera##idx##_info,			\
+};								\
+								\
+static struct platform_device camera##idx##_device = {		\
+	.name	= "soc-camera-pdrv",				\
+	.id	= idx,						\
+	.dev	= {						\
+		.platform_data	= &iclink##idx##_adv7180,	\
+	},							\
+};
+
+MARZEN_CAMERA(0);
+MARZEN_CAMERA(1);
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 	&sdhi0_device,
 	&thermal_device,
 	&hspi_device,
 	&leds_device,
+	&camera0_device,
+	&camera1_device,
 };
 
 static const struct pinctrl_map marzen_pinctrl_map[] = {
@@ -219,6 +249,16 @@ static const struct pinctrl_map marzen_pinctrl_map[] = {
 	/* USB2 */
 	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
 				  "usb2", "usb2"),
+	/* VIN1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
+				  "vin1_clk", "vin1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
+				  "vin1_data8", "vin1"),
+	/* VIN3 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
+				  "vin3_clk", "vin3"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
+				  "vin3_data8", "vin3"),
 };
 
 static void __init marzen_init(void)
@@ -235,6 +275,8 @@ static void __init marzen_init(void)
 
 	r8a7779_add_standard_devices();
 	r8a7779_add_usb_phy_device(&usb_phy_platform_data);
+	r8a7779_add_vin_device(1, &vin_platform_data);
+	r8a7779_add_vin_device(3, &vin_platform_data);
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
 

arch/arm/mach-shmobile/clock-r8a7778.c

@@ -106,6 +106,7 @@ enum {
 	MSTP331,
 	MSTP323, MSTP322, MSTP321,
 	MSTP114,
+	MSTP110, MSTP109,
 	MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
@@ -119,6 +120,8 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
+	[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
+	[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1,  9, 0), /* VIN1 */
 	[MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1,  0, 0), /* USB0/1 */
 	[MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */
 	[MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */
@@ -146,6 +149,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
 	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
+	CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
+	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
 	CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */

arch/arm/mach-shmobile/clock-r8a7779.c

@@ -112,7 +112,9 @@ static struct clk *main_clks[] = {
 };
 
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
+	MSTP120,
 	MSTP116, MSTP115, MSTP114,
+	MSTP110, MSTP109, MSTP108,
 	MSTP103, MSTP101, MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
@@ -125,9 +127,13 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
+	[MSTP120] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 20, 0), /* VIN3 */
 	[MSTP116] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 16, 0), /* PCIe */
 	[MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
 	[MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */
+	[MSTP110] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 10, 0), /* VIN0 */
+	[MSTP109] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  9, 0), /* VIN1 */
+	[MSTP108] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  8, 0), /* VIN2 */
 	[MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  3, 0), /* DU */
 	[MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1,  1, 0), /* USB2 */
 	[MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1,  0, 0), /* USB0/1 */
@@ -162,10 +168,14 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("peripheral_clk",	&clkp_clk),
 
 	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("r8a7779-vin.3", &mstp_clks[MSTP120]), /* VIN3 */
 	CLKDEV_DEV_ID("rcar-pcie", &mstp_clks[MSTP116]), /* PCIe */
 	CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
 	CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */
 	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
+	CLKDEV_DEV_ID("r8a7779-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
+	CLKDEV_DEV_ID("r8a7779-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
+	CLKDEV_DEV_ID("r8a7779-vin.2", &mstp_clks[MSTP108]), /* VIN2 */
 	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
 	CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -22,6 +22,7 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/sh_eth.h>
 #include <linux/platform_data/usb-rcar-phy.h>
+#include <linux/platform_data/camera-rcar.h>
 
 extern void r8a7778_add_standard_devices(void);
 extern void r8a7778_add_standard_devices_dt(void);
@@ -30,6 +31,8 @@ extern void r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
 extern void r8a7778_add_i2c_device(int id);
 extern void r8a7778_add_hspi_device(int id);
 extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info);
+extern void r8a7778_add_vin_device(int id,
+				   struct rcar_vin_platform_data *pdata);
 
 extern void r8a7778_init_late(void);
 extern void r8a7778_init_delay(void);

arch/arm/mach-shmobile/include/mach/r8a7779.h

@@ -5,6 +5,7 @@
 #include <linux/pm_domain.h>
 #include <linux/sh_eth.h>
 #include <linux/platform_data/usb-rcar-phy.h>
+#include <linux/platform_data/camera-rcar.h>
 
 struct platform_device;
 
@@ -35,6 +36,8 @@ extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_add_standard_devices_dt(void);
 extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
 extern void r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
+extern void r8a7779_add_vin_device(int idx,
+				   struct rcar_vin_platform_data *pdata);
 extern void r8a7779_init_late(void);
 extern void r8a7779_clock_init(void);
 extern void r8a7779_pinmux_init(void);

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -333,6 +333,40 @@ void __init r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info)
 		info, sizeof(*info));
 }
 
+/* VIN */
+#define R8A7778_VIN(idx)						\
+static struct resource vin##idx##_resources[] __initdata = {		\
+	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
+	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
+};									\
+									\
+static struct platform_device_info vin##idx##_info __initdata = {	\
+	.parent		= &platform_bus,				\
+	.name		= "r8a7778-vin",				\
+	.id		= idx,						\
+	.res		= vin##idx##_resources,				\
+	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
+	.dma_mask	= DMA_BIT_MASK(32),				\
+}
+
+R8A7778_VIN(0);
+R8A7778_VIN(1);
+
+static struct platform_device_info *vin_info_table[] __initdata = {
+	&vin0_info,
+	&vin1_info,
+};
+
+void __init r8a7778_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
+{
+	BUG_ON(id < 0 || id > 1);
+
+	vin_info_table[id]->data = pdata;
+	vin_info_table[id]->size_data = sizeof(*pdata);
+
+	platform_device_register_full(vin_info_table[id]);
+}
+
 void __init r8a7778_add_standard_devices(void)
 {
 	int i;

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -559,6 +559,33 @@ static struct resource ether_resources[] = {
 	},
 };
 
+#define R8A7779_VIN(idx) \
+static struct resource vin##idx##_resources[] __initdata = {		\
+	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
+	DEFINE_RES_IRQ(gic_iid(0x5f + (idx))),				\
+};									\
+									\
+static struct platform_device_info vin##idx##_info __initdata = {	\
+	.parent		= &platform_bus,				\
+	.name		= "r8a7779-vin",				\
+	.id		= idx,						\
+	.res		= vin##idx##_resources,				\
+	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
+	.dma_mask	= DMA_BIT_MASK(32),				\
+}
+
+R8A7779_VIN(0);
+R8A7779_VIN(1);
+R8A7779_VIN(2);
+R8A7779_VIN(3);
+
+static struct platform_device_info *vin_info_table[] __initdata = {
+	&vin0_info,
+	&vin1_info,
+	&vin2_info,
+	&vin3_info,
+};
+
 static struct platform_device *r8a7779_devices_dt[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -610,6 +637,16 @@ void __init r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata)
 					  pdata, sizeof(*pdata));
 }
 
+void __init r8a7779_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
+{
+	BUG_ON(id < 0 || id > 3);
+
+	vin_info_table[id]->data = pdata;
+	vin_info_table[id]->size_data = sizeof(*pdata);
+
+	platform_device_register_full(vin_info_table[id]);
+}
+
 /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
 void __init __weak r8a7779_register_twd(void) { }
 

drivers/media/common/siano/Kconfig

@@ -23,6 +23,8 @@ config SMS_SIANO_DEBUGFS
 	depends on SMS_SIANO_MDTV
 	depends on DEBUG_FS
 	depends on SMS_USB_DRV
+	depends on CONFIG_SMS_USB_DRV = CONFIG_SMS_SDIO_DRV
+
 	---help---
 	  Choose Y to enable visualizing a dump of the frontend
 	  statistics response packets via debugfs. Currently, works

drivers/media/common/siano/smsdvb-main.c

@@ -276,6 +276,7 @@ static void smsdvb_update_per_slices(struct smsdvb_client_t *client,
 
 	/* Legacy PER/BER */
 	tmp = p->ets_packets * 65535;
+	if (p->ts_packets + p->ets_packets)
 		do_div(tmp, p->ts_packets + p->ets_packets);
 	client->legacy_per = tmp;
 }

drivers/media/dvb-core/dvb-usb-ids.h

@@ -369,4 +369,6 @@
 #define USB_PID_TECHNISAT_USB2_DVB_S2			0x0500
 #define USB_PID_CPYTO_REDI_PC50A			0xa803
 #define USB_PID_CTVDIGDUAL_V2				0xe410
+#define USB_PID_PCTV_2002E                              0x025c
+#define USB_PID_PCTV_2002E_SE                           0x025d
 #endif

drivers/media/dvb-frontends/mb86a20s.c

@@ -157,7 +157,6 @@ static struct regdata mb86a20s_init2[] = {
 	{ 0x45, 0x04 },				/* CN symbol 4 */
 	{ 0x48, 0x04 },				/* CN manual mode */
 
-	{ 0x50, 0xd5 }, { 0x51, 0x01 },		/* Serial */
 	{ 0x50, 0xd6 }, { 0x51, 0x1f },
 	{ 0x50, 0xd2 }, { 0x51, 0x03 },
 	{ 0x50, 0xd7 }, { 0x51, 0xbf },
@@ -1860,7 +1859,7 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
 	dev_dbg(&state->i2c->dev, "%s: IF=%d, IF reg=0x%06llx\n",
 		__func__, state->if_freq, (long long)pll);
 
-	if (!state->config->is_serial) {
+	if (!state->config->is_serial)
 		regD5 &= ~1;
 
 	rc = mb86a20s_writereg(state, 0x50, 0xd5);
@@ -1869,7 +1868,6 @@ static int mb86a20s_initfe(struct dvb_frontend *fe)
 	rc = mb86a20s_writereg(state, 0x51, regD5);
 	if (rc < 0)
 		goto err;
-	}
 
 	rc = mb86a20s_writeregdata(state, mb86a20s_init2);
 	if (rc < 0)

drivers/media/i2c/Kconfig

@@ -206,6 +206,18 @@ config VIDEO_ADV7604
 	  To compile this driver as a module, choose M here: the
 	  module will be called adv7604.
 
+config VIDEO_ADV7842
+	tristate "Analog Devices ADV7842 decoder"
+	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	---help---
+	  Support for the Analog Devices ADV7842 video decoder.
+
+	  This is a Analog Devices Component/Graphics/SD Digitizer
+	  with 2:1 Multiplexed HDMI Receiver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7842.
+
 config VIDEO_BT819
 	tristate "BT819A VideoStream decoder"
 	depends on VIDEO_V4L2 && I2C
@@ -417,6 +429,17 @@ config VIDEO_ADV7393
 	  To compile this driver as a module, choose M here: the
 	  module will be called adv7393.
 
+config VIDEO_ADV7511
+	tristate "Analog Devices ADV7511 encoder"
+	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	---help---
+	  Support for the Analog Devices ADV7511 video encoder.
+
+	  This is a Analog Devices HDMI transmitter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7511.
+
 config VIDEO_AD9389B
 	tristate "Analog Devices AD9389B encoder"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API

drivers/media/i2c/Makefile

@@ -26,7 +26,9 @@ obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o
 obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o
 obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o
 obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o
+obj-$(CONFIG_VIDEO_ADV7842) += adv7842.o
 obj-$(CONFIG_VIDEO_AD9389B) += ad9389b.o
+obj-$(CONFIG_VIDEO_ADV7511) += adv7511.o
 obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
 obj-$(CONFIG_VIDEO_VS6624)  += vs6624.o
 obj-$(CONFIG_VIDEO_BT819) += bt819.o

drivers/media/i2c/ad9389b.c

@@ -33,6 +33,7 @@
 #include <linux/v4l2-dv-timings.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-common.h>
+#include <media/v4l2-dv-timings.h>
 #include <media/v4l2-ctrls.h>
 #include <media/ad9389b.h>
 
@@ -442,22 +443,11 @@ static int ad9389b_log_status(struct v4l2_subdev *sd)
 				vic_detect, vic_sent);
 		}
 	}
-	if (state->dv_timings.type == V4L2_DV_BT_656_1120) {
-		struct v4l2_bt_timings *bt = bt = &state->dv_timings.bt;
-		u32 frame_width = bt->width + bt->hfrontporch +
-			bt->hsync + bt->hbackporch;
-		u32 frame_height = bt->height + bt->vfrontporch +
-			bt->vsync + bt->vbackporch;
-		u32 frame_size = frame_width * frame_height;
-
-		v4l2_info(sd, "timings: %ux%u%s%u (%ux%u). Pix freq. = %u Hz. Polarities = 0x%x\n",
-			bt->width, bt->height, bt->interlaced ? "i" : "p",
-			frame_size > 0 ?  (unsigned)bt->pixelclock / frame_size : 0,
-			frame_width, frame_height,
-			(unsigned)bt->pixelclock, bt->polarities);
-	} else {
+	if (state->dv_timings.type == V4L2_DV_BT_656_1120)
+		v4l2_print_dv_timings(sd->name, "timings: ",
+				&state->dv_timings, false);
+	else
 		v4l2_info(sd, "no timings set\n");
-	}
 	return 0;
 }
 
@@ -636,95 +626,34 @@ static int ad9389b_s_stream(struct v4l2_subdev *sd, int enable)
 	return 0;
 }
 
-static const struct v4l2_dv_timings ad9389b_timings[] = {
-	V4L2_DV_BT_CEA_720X480P59_94,
-	V4L2_DV_BT_CEA_720X576P50,
-	V4L2_DV_BT_CEA_1280X720P24,
-	V4L2_DV_BT_CEA_1280X720P25,
-	V4L2_DV_BT_CEA_1280X720P30,
-	V4L2_DV_BT_CEA_1280X720P50,
-	V4L2_DV_BT_CEA_1280X720P60,
-	V4L2_DV_BT_CEA_1920X1080P24,
-	V4L2_DV_BT_CEA_1920X1080P25,
-	V4L2_DV_BT_CEA_1920X1080P30,
-	V4L2_DV_BT_CEA_1920X1080P50,
-	V4L2_DV_BT_CEA_1920X1080P60,
-
-	V4L2_DV_BT_DMT_640X350P85,
-	V4L2_DV_BT_DMT_640X400P85,
-	V4L2_DV_BT_DMT_720X400P85,
-	V4L2_DV_BT_DMT_640X480P60,
-	V4L2_DV_BT_DMT_640X480P72,
-	V4L2_DV_BT_DMT_640X480P75,
-	V4L2_DV_BT_DMT_640X480P85,
-	V4L2_DV_BT_DMT_800X600P56,
-	V4L2_DV_BT_DMT_800X600P60,
-	V4L2_DV_BT_DMT_800X600P72,
-	V4L2_DV_BT_DMT_800X600P75,
-	V4L2_DV_BT_DMT_800X600P85,
-	V4L2_DV_BT_DMT_848X480P60,
-	V4L2_DV_BT_DMT_1024X768P60,
-	V4L2_DV_BT_DMT_1024X768P70,
-	V4L2_DV_BT_DMT_1024X768P75,
-	V4L2_DV_BT_DMT_1024X768P85,
-	V4L2_DV_BT_DMT_1152X864P75,
-	V4L2_DV_BT_DMT_1280X768P60_RB,
-	V4L2_DV_BT_DMT_1280X768P60,
-	V4L2_DV_BT_DMT_1280X768P75,
-	V4L2_DV_BT_DMT_1280X768P85,
-	V4L2_DV_BT_DMT_1280X800P60_RB,
-	V4L2_DV_BT_DMT_1280X800P60,
-	V4L2_DV_BT_DMT_1280X800P75,
-	V4L2_DV_BT_DMT_1280X800P85,
-	V4L2_DV_BT_DMT_1280X960P60,
-	V4L2_DV_BT_DMT_1280X960P85,
-	V4L2_DV_BT_DMT_1280X1024P60,
-	V4L2_DV_BT_DMT_1280X1024P75,
-	V4L2_DV_BT_DMT_1280X1024P85,
-	V4L2_DV_BT_DMT_1360X768P60,
-	V4L2_DV_BT_DMT_1400X1050P60_RB,
-	V4L2_DV_BT_DMT_1400X1050P60,
-	V4L2_DV_BT_DMT_1400X1050P75,
-	V4L2_DV_BT_DMT_1400X1050P85,
-	V4L2_DV_BT_DMT_1440X900P60_RB,
-	V4L2_DV_BT_DMT_1440X900P60,
-	V4L2_DV_BT_DMT_1600X1200P60,
-	V4L2_DV_BT_DMT_1680X1050P60_RB,
-	V4L2_DV_BT_DMT_1680X1050P60,
-	V4L2_DV_BT_DMT_1792X1344P60,
-	V4L2_DV_BT_DMT_1856X1392P60,
-	V4L2_DV_BT_DMT_1920X1200P60_RB,
-	V4L2_DV_BT_DMT_1366X768P60,
-	V4L2_DV_BT_DMT_1920X1080P60,
-	{},
+static const struct v4l2_dv_timings_cap ad9389b_timings_cap = {
+	.type = V4L2_DV_BT_656_1120,
+	.bt = {
+		.max_width = 1920,
+		.max_height = 1200,
+		.min_pixelclock = 25000000,
+		.max_pixelclock = 170000000,
+		.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+			V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+		.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
+			V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM,
+	},
 };
 
 static int ad9389b_s_dv_timings(struct v4l2_subdev *sd,
 				struct v4l2_dv_timings *timings)
 {
 	struct ad9389b_state *state = get_ad9389b_state(sd);
-	int i;
 
 	v4l2_dbg(1, debug, sd, "%s:\n", __func__);
 
 	/* quick sanity check */
-	if (timings->type != V4L2_DV_BT_656_1120)
-		return -EINVAL;
-
-	if (timings->bt.interlaced)
-		return -EINVAL;
-	if (timings->bt.pixelclock < 27000000 ||
-	    timings->bt.pixelclock > 170000000)
+	if (!v4l2_valid_dv_timings(timings, &ad9389b_timings_cap, NULL, NULL))
 		return -EINVAL;
 
 	/* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
-	   if the format is listed in ad9389b_timings[] */
-	for (i = 0; ad9389b_timings[i].bt.width; i++) {
-		if (v4l_match_dv_timings(timings, &ad9389b_timings[i], 0)) {
-			*timings = ad9389b_timings[i];
-			break;
-		}
-	}
+	   if the format is one of the CEA or DMT timings. */
+	v4l2_find_dv_timings_cap(timings, &ad9389b_timings_cap, 0, NULL, NULL);
 
 	timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS;
 
@@ -762,26 +691,14 @@ static int ad9389b_g_dv_timings(struct v4l2_subdev *sd,
 static int ad9389b_enum_dv_timings(struct v4l2_subdev *sd,
 			struct v4l2_enum_dv_timings *timings)
 {
-	if (timings->index >= ARRAY_SIZE(ad9389b_timings))
-		return -EINVAL;
-
-	memset(timings->reserved, 0, sizeof(timings->reserved));
-	timings->timings = ad9389b_timings[timings->index];
-	return 0;
+	return v4l2_enum_dv_timings_cap(timings, &ad9389b_timings_cap,
+			NULL, NULL);
 }
 
 static int ad9389b_dv_timings_cap(struct v4l2_subdev *sd,
 			struct v4l2_dv_timings_cap *cap)
 {
-	cap->type = V4L2_DV_BT_656_1120;
-	cap->bt.max_width = 1920;
-	cap->bt.max_height = 1200;
-	cap->bt.min_pixelclock = 27000000;
-	cap->bt.max_pixelclock = 170000000;
-	cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
-			 V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT;
-	cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
-		V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM;
+	*cap = ad9389b_timings_cap;
 	return 0;
 }
 
@@ -930,8 +847,10 @@ static void ad9389b_edid_handler(struct work_struct *work)
 		 * (DVI connectors are particularly prone to this problem). */
 		if (state->edid.read_retries) {
 			state->edid.read_retries--;
-			/* EDID read failed, trigger a retry */
-			ad9389b_wr(sd, 0xc9, 0xf);
+			v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__);
+			state->have_monitor = false;
+			ad9389b_s_power(sd, false);
+			ad9389b_s_power(sd, true);
 			queue_delayed_work(state->work_queue,
 					&state->edid_handler, EDID_DELAY);
 			return;
@@ -967,11 +886,9 @@ static void ad9389b_setup(struct v4l2_subdev *sd)
 	ad9389b_wr_and_or(sd, 0x15, 0xf1, 0x0);
 	/* Output format: RGB 4:4:4 */
 	ad9389b_wr_and_or(sd, 0x16, 0x3f, 0x0);
-	/* CSC fixed point: +/-2, 1st order interpolation 4:2:2 -> 4:4:4 up
-	   conversion, Aspect ratio: 16:9 */
-	ad9389b_wr_and_or(sd, 0x17, 0xe1, 0x0e);
-	/* Disable pixel repetition and CSC */
-	ad9389b_wr_and_or(sd, 0x3b, 0x9e, 0x0);
+	/* 1st order interpolation 4:2:2 -> 4:4:4 up conversion,
+	   Aspect ratio: 16:9 */
+	ad9389b_wr_and_or(sd, 0x17, 0xf9, 0x06);
 	/* Output format: RGB 4:4:4, Active Format Information is valid. */
 	ad9389b_wr_and_or(sd, 0x45, 0xc7, 0x08);
 	/* Underscanned */
@@ -1056,12 +973,12 @@ static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd)
 
 static bool edid_block_verify_crc(u8 *edid_block)
 {
-	int i;
 	u8 sum = 0;
+	int i;
 
-	for (i = 0; i < 127; i++)
-		sum += *(edid_block + i);
-	return ((255 - sum + 1) == edid_block[127]);
+	for (i = 0; i < 128; i++)
+		sum += edid_block[i];
+	return sum == 0;
 }
 
 static bool edid_segment_verify_crc(struct v4l2_subdev *sd, u32 segment)
@@ -1107,6 +1024,8 @@ static bool ad9389b_check_edid_status(struct v4l2_subdev *sd)
 	}
 	if (!edid_segment_verify_crc(sd, segment)) {
 		/* edid crc error, force reread of edid segment */
+		v4l2_err(sd, "%s: edid crc error\n", __func__);
+		state->have_monitor = false;
 		ad9389b_s_power(sd, false);
 		ad9389b_s_power(sd, true);
 		return false;
@@ -1190,27 +1109,27 @@ static int ad9389b_probe(struct i2c_client *client, const struct i2c_device_id *
 	state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops,
 			V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI,
 			0, V4L2_DV_TX_MODE_DVI_D);
-	state->hdmi_mode_ctrl->is_private = true;
 	state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL,
 			V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0);
-	state->hotplug_ctrl->is_private = true;
 	state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL,
 			V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0);
-	state->rx_sense_ctrl->is_private = true;
 	state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL,
 			V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0);
-	state->have_edid0_ctrl->is_private = true;
 	state->rgb_quantization_range_ctrl =
 		v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops,
 			V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
 			0, V4L2_DV_RGB_RANGE_AUTO);
-	state->rgb_quantization_range_ctrl->is_private = true;
 	sd->ctrl_handler = hdl;
 	if (hdl->error) {
 		err = hdl->error;
 
 		goto err_hdl;
 	}
+	state->hdmi_mode_ctrl->is_private = true;
+	state->hotplug_ctrl->is_private = true;
+	state->rx_sense_ctrl->is_private = true;
+	state->have_edid0_ctrl->is_private = true;
+	state->rgb_quantization_range_ctrl->is_private = true;
 
 	state->pad.flags = MEDIA_PAD_FL_SINK;
 	err = media_entity_init(&sd->entity, 1, &state->pad, 0);

drivers/media/i2c/adv7343.c

@@ -27,8 +27,10 @@
 #include <linux/uaccess.h>
 
 #include <media/adv7343.h>
+#include <media/v4l2-async.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
 
 #include "adv7343_regs.h"
 
@@ -226,12 +228,12 @@ static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
 	else
 		val = state->pdata->mode_config.sleep_mode << 0 |
 		      state->pdata->mode_config.pll_control << 1 |
-		      state->pdata->mode_config.dac_3 << 2 |
-		      state->pdata->mode_config.dac_2 << 3 |
-		      state->pdata->mode_config.dac_1 << 4 |
-		      state->pdata->mode_config.dac_6 << 5 |
-		      state->pdata->mode_config.dac_5 << 6 |
-		      state->pdata->mode_config.dac_4 << 7;
+		      state->pdata->mode_config.dac[2] << 2 |
+		      state->pdata->mode_config.dac[1] << 3 |
+		      state->pdata->mode_config.dac[0] << 4 |
+		      state->pdata->mode_config.dac[5] << 5 |
+		      state->pdata->mode_config.dac[4] << 6 |
+		      state->pdata->mode_config.dac[3] << 7;
 
 	err = adv7343_write(sd, ADV7343_POWER_MODE_REG, val);
 	if (err < 0)
@@ -250,15 +252,15 @@ static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
 	/* configure SD DAC Output 2 and SD DAC Output 1 bit to zero */
 	val = state->reg82 & (SD_DAC_1_DI & SD_DAC_2_DI);
 
-	if (state->pdata && state->pdata->sd_config.sd_dac_out1)
-		val = val | (state->pdata->sd_config.sd_dac_out1 << 1);
-	else if (state->pdata && !state->pdata->sd_config.sd_dac_out1)
-		val = val & ~(state->pdata->sd_config.sd_dac_out1 << 1);
+	if (state->pdata && state->pdata->sd_config.sd_dac_out[0])
+		val = val | (state->pdata->sd_config.sd_dac_out[0] << 1);
+	else if (state->pdata && !state->pdata->sd_config.sd_dac_out[0])
+		val = val & ~(state->pdata->sd_config.sd_dac_out[0] << 1);
 
-	if (state->pdata && state->pdata->sd_config.sd_dac_out2)
-		val = val | (state->pdata->sd_config.sd_dac_out2 << 2);
-	else if (state->pdata && !state->pdata->sd_config.sd_dac_out2)
-		val = val & ~(state->pdata->sd_config.sd_dac_out2 << 2);
+	if (state->pdata && state->pdata->sd_config.sd_dac_out[1])
+		val = val | (state->pdata->sd_config.sd_dac_out[1] << 2);
+	else if (state->pdata && !state->pdata->sd_config.sd_dac_out[1])
+		val = val & ~(state->pdata->sd_config.sd_dac_out[1] << 2);
 
 	err = adv7343_write(sd, ADV7343_SD_MODE_REG2, val);
 	if (err < 0)
@@ -398,6 +400,40 @@ static int adv7343_initialize(struct v4l2_subdev *sd)
 	return err;
 }
 
+static struct adv7343_platform_data *
+adv7343_get_pdata(struct i2c_client *client)
+{
+	struct adv7343_platform_data *pdata;
+	struct device_node *np;
+
+	if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
+		return client->dev.platform_data;
+
+	np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
+	if (!np)
+		return NULL;
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		goto done;
+
+	pdata->mode_config.sleep_mode =
+			of_property_read_bool(np, "adi,power-mode-sleep-mode");
+
+	pdata->mode_config.pll_control =
+			of_property_read_bool(np, "adi,power-mode-pll-ctrl");
+
+	of_property_read_u32_array(np, "adi,dac-enable",
+				   pdata->mode_config.dac, 6);
+
+	of_property_read_u32_array(np, "adi,sd-dac-enable",
+				   pdata->sd_config.sd_dac_out, 2);
+
+done:
+	of_node_put(np);
+	return pdata;
+}
+
 static int adv7343_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
@@ -416,7 +452,7 @@ static int adv7343_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	/* Copy board specific information here */
-	state->pdata = client->dev.platform_data;
+	state->pdata = adv7343_get_pdata(client);
 
 	state->reg00	= 0x80;
 	state->reg01	= 0x00;
@@ -445,16 +481,21 @@ static int adv7343_probe(struct i2c_client *client,
 				       ADV7343_GAIN_DEF);
 	state->sd.ctrl_handler = &state->hdl;
 	if (state->hdl.error) {
-		int err = state->hdl.error;
-
-		v4l2_ctrl_handler_free(&state->hdl);
-		return err;
+		err = state->hdl.error;
+		goto done;
 	}
 	v4l2_ctrl_handler_setup(&state->hdl);
 
 	err = adv7343_initialize(&state->sd);
 	if (err)
+		goto done;
+
+	err = v4l2_async_register_subdev(&state->sd);
+
+done:
+	if (err < 0)
 		v4l2_ctrl_handler_free(&state->hdl);
+
 	return err;
 }
 
@@ -463,6 +504,7 @@ static int adv7343_remove(struct i2c_client *client)
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct adv7343_state *state = to_state(sd);
 
+	v4l2_async_unregister_subdev(&state->sd);
 	v4l2_device_unregister_subdev(sd);
 	v4l2_ctrl_handler_free(&state->hdl);
 
@@ -476,8 +518,17 @@ static const struct i2c_device_id adv7343_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, adv7343_id);
 
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id adv7343_of_match[] = {
+	{.compatible = "adi,adv7343", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, adv7343_of_match);
+#endif
+
 static struct i2c_driver adv7343_driver = {
 	.driver = {
+		.of_match_table = of_match_ptr(adv7343_of_match),
 		.owner	= THIS_MODULE,
 		.name	= "adv7343",
 	},

drivers/media/i2c/ml86v7667.c

@@ -209,7 +209,8 @@ static int ml86v7667_mbus_fmt(struct v4l2_subdev *sd,
 
 	fmt->code = V4L2_MBUS_FMT_YUYV8_2X8;
 	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
-	fmt->field = V4L2_FIELD_INTERLACED;
+	/* The top field is always transferred first by the chip */
+	fmt->field = V4L2_FIELD_INTERLACED_TB;
 	fmt->width = 720;
 	fmt->height = priv->std & V4L2_STD_525_60 ? 480 : 576;
 

drivers/media/i2c/mt9v032.c

@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/log2.h>
@@ -135,6 +136,8 @@ struct mt9v032 {
 	struct mutex power_lock;
 	int power_count;
 
+	struct clk *clk;
+
 	struct mt9v032_platform_data *pdata;
 
 	u32 sysclk;
@@ -219,10 +222,9 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032)
 	struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev);
 	int ret;
 
-	if (mt9v032->pdata->set_clock) {
-		mt9v032->pdata->set_clock(&mt9v032->subdev, mt9v032->sysclk);
+	clk_set_rate(mt9v032->clk, mt9v032->sysclk);
+	clk_prepare_enable(mt9v032->clk);
 	udelay(1);
-	}
 
 	/* Reset the chip and stop data read out */
 	ret = mt9v032_write(client, MT9V032_RESET, 1);
@@ -238,8 +240,7 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032)
 
 static void mt9v032_power_off(struct mt9v032 *mt9v032)
 {
-	if (mt9v032->pdata->set_clock)
-		mt9v032->pdata->set_clock(&mt9v032->subdev, 0);
+	clk_disable_unprepare(mt9v032->clk);
 }
 
 static int __mt9v032_set_power(struct mt9v032 *mt9v032, bool on)
@@ -748,6 +749,10 @@ static int mt9v032_probe(struct i2c_client *client,
 	if (!mt9v032)
 		return -ENOMEM;
 
+	mt9v032->clk = devm_clk_get(&client->dev, NULL);
+	if (IS_ERR(mt9v032->clk))
+		return PTR_ERR(mt9v032->clk);
+
 	mutex_init(&mt9v032->power_lock);
 	mt9v032->pdata = pdata;
 

drivers/media/i2c/ov9650.c

@@ -1083,7 +1083,7 @@ static int ov965x_enum_frame_sizes(struct v4l2_subdev *sd,
 {
 	int i = ARRAY_SIZE(ov965x_formats);
 
-	if (fse->index > ARRAY_SIZE(ov965x_framesizes))
+	if (fse->index >= ARRAY_SIZE(ov965x_framesizes))
 		return -EINVAL;
 
 	while (--i)

drivers/media/i2c/s5c73m3/s5c73m3-core.c

@@ -1111,6 +1111,11 @@ static int s5c73m3_oif_set_fmt(struct v4l2_subdev *sd,
 	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
 		mf = v4l2_subdev_get_try_format(fh, fmt->pad);
 		*mf = fmt->format;
+		if (fmt->pad == OIF_ISP_PAD) {
+			mf = v4l2_subdev_get_try_format(fh, OIF_SOURCE_PAD);
+			mf->width = fmt->format.width;
+			mf->height = fmt->format.height;
+		}
 	} else {
 		switch (fmt->pad) {
 		case OIF_ISP_PAD:

drivers/media/i2c/s5k6aa.c

@@ -1003,7 +1003,7 @@ static int s5k6aa_enum_frame_interval(struct v4l2_subdev *sd,
 	const struct s5k6aa_interval *fi;
 	int ret = 0;
 
-	if (fie->index > ARRAY_SIZE(s5k6aa_intervals))
+	if (fie->index >= ARRAY_SIZE(s5k6aa_intervals))
 		return -EINVAL;
 
 	v4l_bound_align_image(&fie->width, S5K6AA_WIN_WIDTH_MIN,

drivers/media/i2c/saa7115.c

@@ -225,19 +225,63 @@ static const unsigned char saa7111_init[] = {
 	0x00, 0x00
 };
 
-/* SAA7113/GM7113C init codes
- * It's important that R_14... R_17 == 0x00
- * for the gm7113c chip to deliver stable video
+/*
+ * This table has one illegal value, and some values that are not
+ * correct according to the datasheet initialization table.
+ *
+ *  If you need a table with legal/default values tell the driver in
+ *  i2c_board_info.platform_data, and you will get the gm7113c_init
+ *  table instead.
  */
+
+/* SAA7113 Init codes */
 static const unsigned char saa7113_init[] = {
 	R_01_INC_DELAY, 0x08,
 	R_02_INPUT_CNTL_1, 0xc2,
 	R_03_INPUT_CNTL_2, 0x30,
 	R_04_INPUT_CNTL_3, 0x00,
 	R_05_INPUT_CNTL_4, 0x00,
-	R_06_H_SYNC_START, 0x89,
+	R_06_H_SYNC_START, 0x89,	/* Illegal value -119,
+					 * min. value = -108 (0x94) */
+	R_07_H_SYNC_STOP, 0x0d,
+	R_08_SYNC_CNTL, 0x88,		/* Not datasheet default.
+					 * HTC = VTR mode, should be 0x98 */
+	R_09_LUMA_CNTL, 0x01,
+	R_0A_LUMA_BRIGHT_CNTL, 0x80,
+	R_0B_LUMA_CONTRAST_CNTL, 0x47,
+	R_0C_CHROMA_SAT_CNTL, 0x40,
+	R_0D_CHROMA_HUE_CNTL, 0x00,
+	R_0E_CHROMA_CNTL_1, 0x01,
+	R_0F_CHROMA_GAIN_CNTL, 0x2a,
+	R_10_CHROMA_CNTL_2, 0x08,	/* Not datsheet default.
+					 * VRLN enabled, should be 0x00 */
+	R_11_MODE_DELAY_CNTL, 0x0c,
+	R_12_RT_SIGNAL_CNTL, 0x07,	/* Not datasheet default,
+					 * should be 0x01 */
+	R_13_RT_X_PORT_OUT_CNTL, 0x00,
+	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
+	R_15_VGATE_START_FID_CHG, 0x00,
+	R_16_VGATE_STOP, 0x00,
+	R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
+
+	0x00, 0x00
+};
+
+/*
+ * GM7113C is a clone of the SAA7113 chip
+ *  This init table is copied out of the saa7113 datasheet.
+ *  In R_08 we enable "Automatic Field Detection" [AUFD],
+ *  this is disabled when saa711x_set_v4lstd is called.
+ */
+static const unsigned char gm7113c_init[] = {
+	R_01_INC_DELAY, 0x08,
+	R_02_INPUT_CNTL_1, 0xc0,
+	R_03_INPUT_CNTL_2, 0x33,
+	R_04_INPUT_CNTL_3, 0x00,
+	R_05_INPUT_CNTL_4, 0x00,
+	R_06_H_SYNC_START, 0xe9,
 	R_07_H_SYNC_STOP, 0x0d,
-	R_08_SYNC_CNTL, 0x88,
+	R_08_SYNC_CNTL, 0x98,
 	R_09_LUMA_CNTL, 0x01,
 	R_0A_LUMA_BRIGHT_CNTL, 0x80,
 	R_0B_LUMA_CONTRAST_CNTL, 0x47,
@@ -245,9 +289,9 @@ static const unsigned char saa7113_init[] = {
 	R_0D_CHROMA_HUE_CNTL, 0x00,
 	R_0E_CHROMA_CNTL_1, 0x01,
 	R_0F_CHROMA_GAIN_CNTL, 0x2a,
-	R_10_CHROMA_CNTL_2, 0x08,
+	R_10_CHROMA_CNTL_2, 0x00,
 	R_11_MODE_DELAY_CNTL, 0x0c,
-	R_12_RT_SIGNAL_CNTL, 0x07,
+	R_12_RT_SIGNAL_CNTL, 0x01,
 	R_13_RT_X_PORT_OUT_CNTL, 0x00,
 	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
 	R_15_VGATE_START_FID_CHG, 0x00,
@@ -462,24 +506,6 @@ static const unsigned char saa7115_cfg_50hz_video[] = {
 
 /* ============== SAA7715 VIDEO templates (end) =======  */
 
-/* ============== GM7113C VIDEO templates =============  */
-static const unsigned char gm7113c_cfg_60hz_video[] = {
-	R_08_SYNC_CNTL, 0x68,			/* 0xBO: auto detection, 0x68 = NTSC */
-	R_0E_CHROMA_CNTL_1, 0x07,		/* video autodetection is on */
-
-	0x00, 0x00
-};
-
-static const unsigned char gm7113c_cfg_50hz_video[] = {
-	R_08_SYNC_CNTL, 0x28,			/* 0x28 = PAL */
-	R_0E_CHROMA_CNTL_1, 0x07,
-
-	0x00, 0x00
-};
-
-/* ============== GM7113C VIDEO templates (end) =======  */
-
-
 static const unsigned char saa7115_cfg_vbi_on[] = {
 	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
 	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
@@ -964,17 +990,24 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
 	// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
 	if (std & V4L2_STD_525_60) {
 		v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n");
-		if (state->ident == GM7113C)
-			saa711x_writeregs(sd, gm7113c_cfg_60hz_video);
-		else
+		if (state->ident == GM7113C) {
+			u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+			reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+			reg |= SAA7113_R_08_FSEL;
+			saa711x_write(sd, R_08_SYNC_CNTL, reg);
+		} else {
 			saa711x_writeregs(sd, saa7115_cfg_60hz_video);
+		}
 		saa711x_set_size(sd, 720, 480);
 	} else {
 		v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n");
-		if (state->ident == GM7113C)
-			saa711x_writeregs(sd, gm7113c_cfg_50hz_video);
-		else
+		if (state->ident == GM7113C) {
+			u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+			reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+			saa711x_write(sd, R_08_SYNC_CNTL, reg);
+		} else {
 			saa711x_writeregs(sd, saa7115_cfg_50hz_video);
+		}
 		saa711x_set_size(sd, 720, 576);
 	}
 
@@ -1596,6 +1629,65 @@ static const struct v4l2_subdev_ops saa711x_ops = {
 
 /* ----------------------------------------------------------------------- */
 
+static void saa711x_write_platform_data(struct saa711x_state *state,
+					struct saa7115_platform_data *data)
+{
+	struct v4l2_subdev *sd = &state->sd;
+	u8 work;
+
+	if (state->ident != GM7113C &&
+	    state->ident != SAA7113)
+		return;
+
+	if (data->saa7113_r08_htc) {
+		work = saa711x_read(sd, R_08_SYNC_CNTL);
+		work &= ~SAA7113_R_08_HTC_MASK;
+		work |= ((*data->saa7113_r08_htc) << SAA7113_R_08_HTC_OFFSET);
+		saa711x_write(sd, R_08_SYNC_CNTL, work);
+	}
+
+	if (data->saa7113_r10_vrln) {
+		work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
+		work &= ~SAA7113_R_10_VRLN_MASK;
+		if (*data->saa7113_r10_vrln)
+			work |= (1 << SAA7113_R_10_VRLN_OFFSET);
+		saa711x_write(sd, R_10_CHROMA_CNTL_2, work);
+	}
+
+	if (data->saa7113_r10_ofts) {
+		work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
+		work &= ~SAA7113_R_10_OFTS_MASK;
+		work |= (*data->saa7113_r10_ofts << SAA7113_R_10_OFTS_OFFSET);
+		saa711x_write(sd, R_10_CHROMA_CNTL_2, work);
+	}
+
+	if (data->saa7113_r12_rts0) {
+		work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
+		work &= ~SAA7113_R_12_RTS0_MASK;
+		work |= (*data->saa7113_r12_rts0 << SAA7113_R_12_RTS0_OFFSET);
+
+		/* According to the datasheet,
+		 * SAA7113_RTS_DOT_IN should only be used on RTS1 */
+		WARN_ON(*data->saa7113_r12_rts0 == SAA7113_RTS_DOT_IN);
+		saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work);
+	}
+
+	if (data->saa7113_r12_rts1) {
+		work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
+		work &= ~SAA7113_R_12_RTS1_MASK;
+		work |= (*data->saa7113_r12_rts1 << SAA7113_R_12_RTS1_OFFSET);
+		saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work);
+	}
+
+	if (data->saa7113_r13_adlsb) {
+		work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL);
+		work &= ~SAA7113_R_13_ADLSB_MASK;
+		if (*data->saa7113_r13_adlsb)
+			work |= (1 << SAA7113_R_13_ADLSB_OFFSET);
+		saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, work);
+	}
+}
+
 /**
  * saa711x_detect_chip - Detects the saa711x (or clone) variant
  * @client:		I2C client structure.
@@ -1704,6 +1796,7 @@ static int saa711x_probe(struct i2c_client *client,
 	struct saa711x_state *state;
 	struct v4l2_subdev *sd;
 	struct v4l2_ctrl_handler *hdl;
+	struct saa7115_platform_data *pdata;
 	int ident;
 	char name[CHIP_VER_SIZE + 1];
 
@@ -1767,21 +1860,31 @@ static int saa711x_probe(struct i2c_client *client,
 
 	/* init to 60hz/48khz */
 	state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
+	pdata = client->dev.platform_data;
 	switch (state->ident) {
 	case SAA7111:
 	case SAA7111A:
 		saa711x_writeregs(sd, saa7111_init);
 		break;
 	case GM7113C:
+		saa711x_writeregs(sd, gm7113c_init);
+		break;
 	case SAA7113:
+		if (pdata && pdata->saa7113_force_gm7113c_init)
+			saa711x_writeregs(sd, gm7113c_init);
+		else
 			saa711x_writeregs(sd, saa7113_init);
 		break;
 	default:
 		state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
 		saa711x_writeregs(sd, saa7115_init_auto_input);
 	}
-	if (state->ident > SAA7111A)
+	if (state->ident > SAA7111A && state->ident != GM7113C)
 		saa711x_writeregs(sd, saa7115_init_misc);
+
+	if (pdata)
+		saa711x_write_platform_data(state, pdata);
+
 	saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
 	v4l2_ctrl_handler_setup(hdl);
 

drivers/media/i2c/saa711x_regs.h

@@ -201,6 +201,25 @@
 #define R_FB_PULSE_C_POS_MSB                          0xfb
 #define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES     0xff
 
+/* SAA7113 bit-masks */
+#define SAA7113_R_08_HTC_OFFSET 3
+#define SAA7113_R_08_HTC_MASK (0x3 << SAA7113_R_08_HTC_OFFSET)
+#define SAA7113_R_08_FSEL 0x40
+#define SAA7113_R_08_AUFD 0x80
+
+#define SAA7113_R_10_VRLN_OFFSET 3
+#define SAA7113_R_10_VRLN_MASK (0x1 << SAA7113_R_10_VRLN_OFFSET)
+#define SAA7113_R_10_OFTS_OFFSET 6
+#define SAA7113_R_10_OFTS_MASK (0x3 << SAA7113_R_10_OFTS_OFFSET)
+
+#define SAA7113_R_12_RTS0_OFFSET 0
+#define SAA7113_R_12_RTS0_MASK (0xf << SAA7113_R_12_RTS0_OFFSET)
+#define SAA7113_R_12_RTS1_OFFSET 4
+#define SAA7113_R_12_RTS1_MASK (0xf << SAA7113_R_12_RTS1_OFFSET)
+
+#define SAA7113_R_13_ADLSB_OFFSET 7
+#define SAA7113_R_13_ADLSB_MASK (0x1 << SAA7113_R_13_ADLSB_OFFSET)
+
 #if 0
 /* Those structs will be used in the future for debug purposes */
 struct saa711x_reg_descr {

drivers/media/i2c/smiapp-pll.c

@@ -87,6 +87,17 @@ static void print_pll(struct device *dev, struct smiapp_pll *pll)
 	dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz);
 }
 
+/*
+ * Heuristically guess the PLL tree for a given common multiplier and
+ * divisor. Begin with the operational timing and continue to video
+ * timing once operational timing has been verified.
+ *
+ * @mul is the PLL multiplier and @div is the common divisor
+ * (pre_pll_clk_div and op_sys_clk_div combined). The final PLL
+ * multiplier will be a multiple of @mul.
+ *
+ * @return Zero on success, error code on error.
+ */
 static int __smiapp_pll_calculate(struct device *dev,
 				  const struct smiapp_pll_limits *limits,
 				  struct smiapp_pll *pll, uint32_t mul,
@@ -95,6 +106,12 @@ static int __smiapp_pll_calculate(struct device *dev,
 	uint32_t sys_div;
 	uint32_t best_pix_div = INT_MAX >> 1;
 	uint32_t vt_op_binning_div;
+	/*
+	 * Higher multipliers (and divisors) are often required than
+	 * necessitated by the external clock and the output clocks.
+	 * There are limits for all values in the clock tree. These
+	 * are the minimum and maximum multiplier for mul.
+	 */
 	uint32_t more_mul_min, more_mul_max;
 	uint32_t more_mul_factor;
 	uint32_t min_vt_div, max_vt_div, vt_div;

drivers/media/i2c/smiapp/smiapp-core.c

@@ -1122,9 +1122,9 @@ static int smiapp_power_on(struct smiapp_sensor *sensor)
 		rval = sensor->platform_data->set_xclk(
 			&sensor->src->sd, sensor->platform_data->ext_clk);
 	else
-		rval = clk_enable(sensor->ext_clk);
+		rval = clk_prepare_enable(sensor->ext_clk);
 	if (rval < 0) {
-		dev_dbg(&client->dev, "failed to set xclk\n");
+		dev_dbg(&client->dev, "failed to enable xclk\n");
 		goto out_xclk_fail;
 	}
 	usleep_range(1000, 1000);
@@ -1244,7 +1244,7 @@ static int smiapp_power_on(struct smiapp_sensor *sensor)
 	if (sensor->platform_data->set_xclk)
 		sensor->platform_data->set_xclk(&sensor->src->sd, 0);
 	else
-		clk_disable(sensor->ext_clk);
+		clk_disable_unprepare(sensor->ext_clk);
 
 out_xclk_fail:
 	regulator_disable(sensor->vana);
@@ -1270,7 +1270,7 @@ static void smiapp_power_off(struct smiapp_sensor *sensor)
 	if (sensor->platform_data->set_xclk)
 		sensor->platform_data->set_xclk(&sensor->src->sd, 0);
 	else
-		clk_disable(sensor->ext_clk);
+		clk_disable_unprepare(sensor->ext_clk);
 	usleep_range(5000, 5000);
 	regulator_disable(sensor->vana);
 	sensor->streaming = 0;
@@ -1835,12 +1835,12 @@ static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
 		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]
 		/ sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE];
 
-	a = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
-		max(a, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
-	b = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
-		max(b, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
-	max_m = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
-		    max(max_m, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
+	a = clamp(a, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN],
+		  sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX]);
+	b = clamp(b, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN],
+		  sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX]);
+	max_m = clamp(max_m, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN],
+		      sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX]);
 
 	dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m);
 
@@ -2363,11 +2363,9 @@ static int smiapp_registered(struct v4l2_subdev *subdev)
 	}
 
 	if (!sensor->platform_data->set_xclk) {
-		sensor->ext_clk = devm_clk_get(&client->dev,
-					sensor->platform_data->ext_clk_name);
+		sensor->ext_clk = devm_clk_get(&client->dev, "ext_clk");
 		if (IS_ERR(sensor->ext_clk)) {
-			dev_err(&client->dev, "could not get clock %s\n",
-				sensor->platform_data->ext_clk_name);
+			dev_err(&client->dev, "could not get clock\n");
 			return -ENODEV;
 		}
 
@@ -2375,8 +2373,7 @@ static int smiapp_registered(struct v4l2_subdev *subdev)
 				    sensor->platform_data->ext_clk);
 		if (rval < 0) {
 			dev_err(&client->dev,
-				"unable to set clock %s freq to %u\n",
-				sensor->platform_data->ext_clk_name,
+				"unable to set clock freq to %u\n",
 				sensor->platform_data->ext_clk);
 			return -ENODEV;
 		}
@@ -2839,7 +2836,7 @@ static int smiapp_remove(struct i2c_client *client)
 		if (sensor->platform_data->set_xclk)
 			sensor->platform_data->set_xclk(&sensor->src->sd, 0);
 		else
-			clk_disable(sensor->ext_clk);
+			clk_disable_unprepare(sensor->ext_clk);
 		sensor->power_count = 0;
 	}
 

drivers/media/i2c/soc_camera/mt9m111.c

@@ -946,6 +946,10 @@ static int mt9m111_probe(struct i2c_client *client,
 	if (!mt9m111)
 		return -ENOMEM;
 
+	mt9m111->clk = v4l2_clk_get(&client->dev, "mclk");
+	if (IS_ERR(mt9m111->clk))
+		return -EPROBE_DEFER;
+
 	/* Default HIGHPOWER context */
 	mt9m111->ctx = &context_b;
 
@@ -963,8 +967,10 @@ static int mt9m111_probe(struct i2c_client *client,
 			&mt9m111_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
 			V4L2_EXPOSURE_AUTO);
 	mt9m111->subdev.ctrl_handler = &mt9m111->hdl;
-	if (mt9m111->hdl.error)
-		return mt9m111->hdl.error;
+	if (mt9m111->hdl.error) {
+		ret = mt9m111->hdl.error;
+		goto out_clkput;
+	}
 
 	/* Second stage probe - when a capture adapter is there */
 	mt9m111->rect.left	= MT9M111_MIN_DARK_COLS;
@@ -975,18 +981,25 @@ static int mt9m111_probe(struct i2c_client *client,
 	mt9m111->lastpage	= -1;
 	mutex_init(&mt9m111->power_lock);
 
-	mt9m111->clk = v4l2_clk_get(&client->dev, "mclk");
-	if (IS_ERR(mt9m111->clk)) {
-		ret = PTR_ERR(mt9m111->clk);
-		goto eclkget;
-	}
+	ret = soc_camera_power_init(&client->dev, ssdd);
+	if (ret < 0)
+		goto out_hdlfree;
 
 	ret = mt9m111_video_probe(client);
-	if (ret) {
-		v4l2_clk_put(mt9m111->clk);
-eclkget:
+	if (ret < 0)
+		goto out_hdlfree;
+
+	mt9m111->subdev.dev = &client->dev;
+	ret = v4l2_async_register_subdev(&mt9m111->subdev);
+	if (ret < 0)
+		goto out_hdlfree;
+
+	return 0;
+
+out_hdlfree:
 	v4l2_ctrl_handler_free(&mt9m111->hdl);
-	}
+out_clkput:
+	v4l2_clk_put(mt9m111->clk);
 
 	return ret;
 }
@@ -995,6 +1008,7 @@ static int mt9m111_remove(struct i2c_client *client)
 {
 	struct mt9m111 *mt9m111 = to_mt9m111(client);
 
+	v4l2_async_unregister_subdev(&mt9m111->subdev);
 	v4l2_clk_put(mt9m111->clk);
 	v4l2_device_unregister_subdev(&mt9m111->subdev);
 	v4l2_ctrl_handler_free(&mt9m111->hdl);

drivers/media/i2c/soc_camera/mt9t031.c

@@ -594,8 +594,11 @@ static int mt9t031_s_power(struct v4l2_subdev *sd, int on)
 		ret = soc_camera_power_on(&client->dev, ssdd, mt9t031->clk);
 		if (ret < 0)
 			return ret;
+		if (vdev)
+			/* Not needed during probing, when vdev isn't available yet */
 			vdev->dev.type = &mt9t031_dev_type;
 	} else {
+		if (vdev)
 			vdev->dev.type = NULL;
 		soc_camera_power_off(&client->dev, ssdd, mt9t031->clk);
 	}

drivers/media/i2c/ths7303.c

@@ -291,10 +291,8 @@ static int ths7303_log_status(struct v4l2_subdev *sd)
 		struct v4l2_bt_timings *bt = bt = &state->bt;
 		u32 frame_width, frame_height;
 
-		frame_width = bt->width + bt->hfrontporch +
-			      bt->hsync + bt->hbackporch;
-		frame_height = bt->height + bt->vfrontporch +
-			       bt->vsync + bt->vbackporch;
+		frame_width = V4L2_DV_BT_FRAME_WIDTH(bt);
+		frame_height = V4L2_DV_BT_FRAME_HEIGHT(bt);
 		v4l2_info(sd,
 			  "timings: %dx%d%s%d (%dx%d). Pix freq. = %d Hz. Polarities = 0x%x\n",
 			  bt->width, bt->height, bt->interlaced ? "i" : "p",

drivers/media/i2c/tvp514x.c

@@ -36,6 +36,7 @@
 #include <linux/module.h>
 #include <linux/v4l2-mediabus.h>
 
+#include <media/v4l2-async.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-mediabus.h>
@@ -1175,16 +1176,22 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	sd->ctrl_handler = &decoder->hdl;
 	if (decoder->hdl.error) {
 		ret = decoder->hdl.error;
-
-		v4l2_ctrl_handler_free(&decoder->hdl);
-		return ret;
+		goto done;
 	}
 	v4l2_ctrl_handler_setup(&decoder->hdl);
 
+	ret = v4l2_async_register_subdev(&decoder->sd);
+	if (!ret)
 		v4l2_info(sd, "%s decoder driver registered !!\n", sd->name);
 
-	return 0;
-
+done:
+	if (ret < 0) {
+		v4l2_ctrl_handler_free(&decoder->hdl);
+#if defined(CONFIG_MEDIA_CONTROLLER)
+		media_entity_cleanup(&decoder->sd.entity);
+#endif
+	}
+	return ret;
 }
 
 /**
@@ -1199,6 +1206,7 @@ static int tvp514x_remove(struct i2c_client *client)
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct tvp514x_decoder *decoder = to_decoder(sd);
 
+	v4l2_async_unregister_subdev(&decoder->sd);
 	v4l2_device_unregister_subdev(sd);
 #if defined(CONFIG_MEDIA_CONTROLLER)
 	media_entity_cleanup(&decoder->sd.entity);

drivers/media/media-entity.c

@@ -20,6 +20,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/bitmap.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <media/media-entity.h>
@@ -121,7 +122,6 @@ static struct media_entity *stack_pop(struct media_entity_graph *graph)
 	return entity;
 }
 
-#define stack_peek(en)	((en)->stack[(en)->top - 1].entity)
 #define link_top(en)	((en)->stack[(en)->top].link)
 #define stack_top(en)	((en)->stack[(en)->top].entity)
 
@@ -140,6 +140,12 @@ void media_entity_graph_walk_start(struct media_entity_graph *graph,
 {
 	graph->top = 0;
 	graph->stack[graph->top].entity = NULL;
+	bitmap_zero(graph->entities, MEDIA_ENTITY_ENUM_MAX_ID);
+
+	if (WARN_ON(entity->id >= MEDIA_ENTITY_ENUM_MAX_ID))
+		return;
+
+	__set_bit(entity->id, graph->entities);
 	stack_push(graph, entity);
 }
 EXPORT_SYMBOL_GPL(media_entity_graph_walk_start);
@@ -180,9 +186,11 @@ media_entity_graph_walk_next(struct media_entity_graph *graph)
 
 		/* Get the entity in the other end of the link . */
 		next = media_entity_other(entity, link);
+		if (WARN_ON(next->id >= MEDIA_ENTITY_ENUM_MAX_ID))
+			return NULL;
 
-		/* Was it the entity we came here from? */
-		if (next == stack_peek(graph)) {
+		/* Has the entity already been visited? */
+		if (__test_and_set_bit(next->id, graph->entities)) {
 			link_top(graph)++;
 			continue;
 		}

drivers/media/pci/bt8xx/bttvp.h

@@ -459,6 +459,9 @@ struct bttv {
 	int mbox_iow;
 	int mbox_csel;
 
+	/* switch status for multi-controller cards */
+	char sw_status[4];
+
 	/* risc memory management data
 	   - must acquire s_lock before changing these
 	   - only the irq handler is supported to touch top + bottom + vcurr */

drivers/media/pci/cx23885/Kconfig

@@ -29,6 +29,7 @@ config VIDEO_CX23885
 	select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT

drivers/media/pci/cx23885/cx23885-av.c

@@ -23,6 +23,7 @@
 
 #include "cx23885.h"
 #include "cx23885-av.h"
+#include "cx23885-video.h"
 
 void cx23885_av_work_handler(struct work_struct *work)
 {
@@ -32,5 +33,17 @@ void cx23885_av_work_handler(struct work_struct *work)
 
 	v4l2_subdev_call(dev->sd_cx25840, core, interrupt_service_routine,
 			 PCI_MSK_AV_CORE, &handled);
+
+	/* Getting here with the interrupt not handled
+	   then probbaly flatiron does have pending interrupts.
+	*/
+	if (!handled) {
+		/* clear left and right adc channel interrupt request flag */
+		cx23885_flatiron_write(dev, 0x1f,
+			cx23885_flatiron_read(dev, 0x1f) | 0x80);
+		cx23885_flatiron_write(dev, 0x23,
+			cx23885_flatiron_read(dev, 0x23) | 0x80);
+	}
+
 	cx23885_irq_enable(dev, PCI_MSK_AV_CORE);
 }

drivers/media/pci/cx23885/cx23885-cards.c

@@ -528,11 +528,12 @@ struct cx23885_board cx23885_boards[] = {
 		} },
 	},
 	[CX23885_BOARD_MYGICA_X8507] = {
-		.name		= "Mygica X8507",
+		.name		= "Mygica X8502/X8507 ISDB-T",
 		.tuner_type = TUNER_XC5000,
 		.tuner_addr = 0x61,
 		.tuner_bus	= 1,
 		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
 		.input		= {
 			{
 				.type   = CX23885_VMUX_TELEVISION,
@@ -1281,7 +1282,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_MYGICA_X8507:
 		/* GPIO-0 (0)Analog / (1)Digital TV */
 		/* GPIO-1 reset XC5000 */
-		/* GPIO-2 reset LGS8GL5 / LGS8G75 */
+		/* GPIO-2 demod reset */
 		cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1);
 		cx23885_gpio_clear(dev, GPIO_1 | GPIO_2);
 		mdelay(100);
@@ -1677,6 +1678,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		break;
 	case CX23885_BOARD_MYGICA_X8506:
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+	case CX23885_BOARD_MYGICA_X8507:
 		ts1->gen_ctrl_val  = 0x5; /* Parallel */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;

drivers/media/pci/cx23885/cx23885-core.c

@@ -1941,10 +1941,7 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
 
 	if ((pci_status & pci_mask) & PCI_MSK_AV_CORE) {
 		cx23885_irq_disable(dev, PCI_MSK_AV_CORE);
-		if (!schedule_work(&dev->cx25840_work))
-			printk(KERN_ERR "%s: failed to set up deferred work for"
-			       " AV Core/IR interrupt. Interrupt is disabled"
-			       " and won't be re-enabled\n", dev->name);
+		schedule_work(&dev->cx25840_work);
 		handled++;
 	}
 

drivers/media/platform/exynos4-is/fimc-is.c

@@ -993,3 +993,4 @@ module_exit(fimc_is_module_exit);
 MODULE_ALIAS("platform:" FIMC_IS_DRV_NAME);
 MODULE_AUTHOR("Younghwan Joo <yhwan.joo@samsung.com>");
 MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_LICENSE("GPL v2");