Commit 27faa0aa authored by Arun Ramadoss's avatar Arun Ramadoss Committed by Paolo Abeni

net: dsa: microchip: ksz9477: cleanup the ksz9477_switch_detect

The ksz9477_switch_detect performs the detecting the chip id from the
location 0x00 and also check gigabit compatibility check & number of
ports based on the register global_options0. To prepare the common ksz
switch detect function, routine other than chip id read is moved to
ksz9477_switch_init.
Signed-off-by: default avatarArun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
parent 00bb2920
......@@ -1362,12 +1362,30 @@ static u32 ksz9477_get_port_addr(int port, int offset)
static int ksz9477_switch_detect(struct ksz_device *dev)
{
u8 data8;
u8 id_hi;
u8 id_lo;
u32 id32;
int ret;
/* read chip id */
ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
if (ret)
return ret;
dev_dbg(dev->dev, "Switch detect: ID=%08x\n", id32);
dev->chip_id = id32 & 0x00FFFF00;
return 0;
}
static int ksz9477_switch_init(struct ksz_device *dev)
{
u8 data8;
int ret;
dev->ds->ops = &ksz9477_switch_ops;
dev->port_mask = (1 << dev->info->port_cnt) - 1;
/* turn off SPI DO Edge select */
ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
if (ret)
......@@ -1378,10 +1396,6 @@ static int ksz9477_switch_detect(struct ksz_device *dev)
if (ret)
return ret;
/* read chip id */
ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
if (ret)
return ret;
ret = ksz_read8(dev, REG_GLOBAL_OPTIONS, &data8);
if (ret)
return ret;
......@@ -1392,10 +1406,7 @@ static int ksz9477_switch_detect(struct ksz_device *dev)
/* Default capability is gigabit capable. */
dev->features = GBIT_SUPPORT;
dev_dbg(dev->dev, "Switch detect: ID=%08x%02x\n", id32, data8);
id_hi = (u8)(id32 >> 16);
id_lo = (u8)(id32 >> 8);
if ((id_lo & 0xf) == 3) {
if (dev->chip_id == KSZ9893_CHIP_ID) {
/* Chip is from KSZ9893 design. */
dev_info(dev->dev, "Found KSZ9893\n");
dev->features |= IS_9893;
......@@ -1413,21 +1424,6 @@ static int ksz9477_switch_detect(struct ksz_device *dev)
if (!(data8 & SW_GIGABIT_ABLE))
dev->features &= ~GBIT_SUPPORT;
}
/* Change chip id to known ones so it can be matched against them. */
id32 = (id_hi << 16) | (id_lo << 8);
dev->chip_id = id32;
return 0;
}
static int ksz9477_switch_init(struct ksz_device *dev)
{
dev->ds->ops = &ksz9477_switch_ops;
dev->port_mask = (1 << dev->info->port_cnt) - 1;
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment