Merge tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6 into next/soc

From Sascha Hauer:
ARM i.MX SoC updates for next

Mostly clock related updates, most notably the conversion of
i.MX31 to a DT based lookup.

* tag 'imx-soc' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM: clk-imx35: Fix build warnings with W=1
  ARM: imx27: add a clock gate to activate SPLL clock
  ARM: mx31: Replace clk_register_clkdev with clock DT lookup
  ARM: clk-imx31: Add dummy clock
  ARM: Let CONFIG_MACH_IMX31_DT be built by default
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/clock/imx31-clock.txt

+* Clock bindings for Freescale i.MX31
+
+Required properties:
+- compatible: Should be "fsl,imx31-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX31
+clocks and IDs.
+
+	Clock		    ID
+	-----------------------
+	dummy	             0
+	ckih                 1
+	ckil                 2
+	mpll                 3
+	spll                 4
+	upll                 5
+	mcu_main             6
+	hsp                  7
+	ahb                  8
+	nfc                  9
+	ipg                  10
+	per_div              11
+	per                  12
+	csi_sel              13
+	fir_sel              14
+	csi_div              15
+	usb_div_pre          16
+	usb_div_post         17
+	fir_div_pre          18
+	fir_div_post         19
+	sdhc1_gate           20
+	sdhc2_gate           21
+	gpt_gate             22
+	epit1_gate           23
+	epit2_gate           24
+	iim_gate             25
+	ata_gate             26
+	sdma_gate            27
+	cspi3_gate           28
+	rng_gate             29
+	uart1_gate           30
+	uart2_gate           31
+	ssi1_gate            32
+	i2c1_gate            33
+	i2c2_gate            34
+	i2c3_gate            35
+	hantro_gate          36
+	mstick1_gate         37
+	mstick2_gate         38
+	csi_gate             39
+	rtc_gate             40
+	wdog_gate            41
+	pwm_gate             42
+	sim_gate             43
+	ect_gate             44
+	usb_gate             45
+	kpp_gate             46
+	ipu_gate             47
+	uart3_gate           48
+	uart4_gate           49
+	uart5_gate           50
+	owire_gate           51
+	ssi2_gate            52
+	cspi1_gate           53
+	cspi2_gate           54
+	gacc_gate            55
+	emi_gate             56
+	rtic_gate            57
+	firi_gate            58
+
+Examples:
+
+clks: ccm@53f80000{
+	compatible = "fsl,imx31-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <0 31 0x04 0 53 0x04>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@43f90000 {
+	compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+	reg = <0x43f90000 0x4000>;
+	interrupts = <45>;
+	clocks = <&clks 10>, <&clks 30>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};

arch/arm/boot/dts/imx31.dtsi

@@ -45,6 +45,8 @@ uart1: serial@43f90000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43f90000 0x4000>;
 				interrupts = <45>;
+				clocks = <&clks 10>, <&clks 30>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -52,12 +54,16 @@ uart2: serial@43f94000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43f94000 0x4000>;
 				interrupts = <32>;
+				clocks = <&clks 10>, <&clks 31>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
 			uart4: serial@43fb0000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43fb0000 0x4000>;
+				clocks = <&clks 10>, <&clks 49>;
+				clock-names = "ipg", "per";
 				interrupts = <46>;
 				status = "disabled";
 			};
@@ -66,6 +72,8 @@ uart5: serial@43fb4000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43fb4000 0x4000>;
 				interrupts = <47>;
+				clocks = <&clks 10>, <&clks 50>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 		};
@@ -81,8 +89,17 @@ uart3: serial@5000c000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x5000c000 0x4000>;
 				interrupts = <18>;
+				clocks = <&clks 10>, <&clks 48>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
+
+			clks: ccm@53f80000{
+				compatible = "fsl,imx31-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <0 31 0x04 0 53 0x04>;
+				#clock-cells = <1>;
+			};
 		};
 	};
 };

arch/arm/configs/imx_v6_v7_defconfig

@@ -19,6 +19,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_MULTI_V7=y
+CONFIG_MACH_IMX31_DT=y
 CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_PCM037=y

arch/arm/mach-imx/clk-imx27.c

@@ -62,7 +62,7 @@ static const char *clko_sel_clks[] = {
 	"32k", "usb_div", "dptc",
 };
 
-static const char *ssi_sel_clks[] = { "spll", "mpll", };
+static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
 
 enum mx27_clks {
 	dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
@@ -82,7 +82,7 @@ enum mx27_clks {
 	csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
 	uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
 	uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
-	mpll_sel, clk_max
+	mpll_sel, spll_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -104,6 +104,7 @@ int __init mx27_clocks_init(unsigned long fref)
 			ARRAY_SIZE(mpll_sel_clks));
 	clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
 	clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
+	clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
 	clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
 
 	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
@@ -121,7 +122,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
 	clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
 	clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
-	clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
+	clk[usb_div] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
 	clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
 	clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
 	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)

arch/arm/mach-imx/clk-imx31.c

@@ -34,8 +34,8 @@ static const char *csi_sel[] = { "upll", "spll", };
 static const char *fir_sel[] = { "mcu_main", "upll", "spll" };
 
 enum mx31_clks {
-	ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg, per_div,
-	per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
+	dummy, ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg,
+	per_div, per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
 	fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate,
 	iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate,
 	uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate,
@@ -46,12 +46,15 @@ enum mx31_clks {
 };
 
 static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
 
 int __init mx31_clocks_init(unsigned long fref)
 {
 	void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
 	int i;
+	struct device_node *np;
 
+	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckih] = imx_clk_fixed("ckih", fref);
 	clk[ckil] = imx_clk_fixed("ckil", 32768);
 	clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL);
@@ -116,6 +119,14 @@ int __init mx31_clocks_init(unsigned long fref)
 			pr_err("imx31 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
+
+	if (np) {
+		clk_data.clks = clk;
+		clk_data.clk_num = ARRAY_SIZE(clk);
+		of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+	}
+
 	clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
 	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");

arch/arm/mach-imx/clk-imx35.c

@@ -67,13 +67,13 @@ enum mx35_clks {
 
 static struct clk *clk[clk_max];
 
-int __init mx35_clocks_init()
+int __init mx35_clocks_init(void)
 {
 	void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
 	u32 pdr0, consumer_sel, hsp_sel;
 	struct arm_ahb_div *aad;
 	unsigned char *hsp_div;
-	int i;
+	u32 i;
 
 	pdr0 = __raw_readl(base + MXC_CCM_PDR0);
 	consumer_sel = (pdr0 >> 16) & 0xf;

arch/arm/mach-imx/imx31-dt.c

@@ -18,24 +18,9 @@
 #include "common.h"
 #include "mx31.h"
 
-static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
-			"imx21-uart.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR,
-			"imx21-uart.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR,
-			"imx21-uart.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR,
-			"imx21-uart.3", NULL),
-	OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR,
-			"imx21-uart.4", NULL),
-	{ /* sentinel */ }
-};
-
 static void __init imx31_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     imx31_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *imx31_dt_board_compat[] __initdata = {