Commit 281e3aea authored by Serge Semin's avatar Serge Semin Committed by Thomas Bogendoerfer

mips: Add MIPS Warrior P5600 support

This is a MIPS32 Release 5 based IP core with XPA, EVA, dual/quad issue
exec pipes, MMU with two-levels TLB, UCA, MSA, MDU core level features
and system level features like up to six P5600 calculation cores, CM2
with L2 cache, IOCU/IOMMU (though might be unused depending on the
system-specific IP core configuration), GIC, CPC, virtualisation module,
eJTAG and PDtrace.

As being MIPS32 Release 5 based core it provides all the features
available by the CPU_MIPS32_R5 config, while adding a few more like
UCA attribute support, availability of CPU-freq (by means of L2/CM
clock ratio setting), EI/VI GIC modes detection at runtime.

In addition to this if P5600 architecture is enabled modern GNU GCC
provides a specific tuning for P5600 processors with respect to the
classic MIPS32 Release 5. First of all branch-likely avoidance is
activated only when the code is compiled with the speed optimization
(avoidance is always enabled for the pure MIPS32 Release 5
architecture). Secondly the madd/msub avoidance is enabled since
madd/msub utilization isn't profitable due to overhead of getting the
result out of the HI/LO registers. Multiply-accumulate instructions are
activated and utilized together with the necessary code reorder when
multiply-add/multiply-subtract statements are met. Finally load/store
bonding is activated by default. All of these optimizations may make
the code relatively faster than if just MIP32 release 5 architecture
was requested.
Co-developed-by: default avatarAlexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: default avatarAlexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: default avatarSerge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: default avatarThomas Bogendoerfer <tsbogend@alpha.franken.de>
parent ab7c01fd
......@@ -1618,6 +1618,28 @@ config CPU_MIPS64_R6
family, are based on a MIPS64r6 processor. If you own an older
processor, you probably need to select MIPS64r1 or MIPS64r2 instead.
config CPU_P5600
bool "MIPS Warrior P5600"
depends on SYS_HAS_CPU_P5600
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA
select CPU_SUPPORTS_UNCACHED_ACCELERATED
select CPU_SUPPORTS_CPUFREQ
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select HAVE_KVM
select MIPS_O32_FP64_SUPPORT
help
Choose this option to build a kernel for MIPS Warrior P5600 CPU.
It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes,
MMU with two-levels TLB, UCA, MSA, MDU core level features and system
level features like up to six P5600 calculation cores, CM2 with L2
cache, IOCU/IOMMU (though might be unused depending on the system-
specific IP core configuration), GIC, CPC, virtualisation module,
eJTAG and PDtrace.
config CPU_R3000
bool "R3000"
depends on SYS_HAS_CPU_R3000
......@@ -1794,7 +1816,8 @@ endchoice
config CPU_MIPS32_3_5_FEATURES
bool "MIPS32 Release 3.5 Features"
depends on SYS_HAS_CPU_MIPS32_R3_5
depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6
depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \
CPU_P5600
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture including features from the 3.5 release such as
......@@ -1814,7 +1837,7 @@ config CPU_MIPS32_3_5_EVA
config CPU_MIPS32_R5_FEATURES
bool "MIPS32 Release 5 Features"
depends on SYS_HAS_CPU_MIPS32_R5
depends on CPU_MIPS32_R2 || CPU_MIPS32_R5
depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture including features from release 5 such as
......@@ -1969,6 +1992,10 @@ config SYS_HAS_CPU_MIPS64_R6
bool
select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
config SYS_HAS_CPU_P5600
bool
select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
config SYS_HAS_CPU_R3000
bool
......@@ -2053,7 +2080,7 @@ endmenu
config CPU_MIPS32
bool
default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \
CPU_MIPS32_R6
CPU_MIPS32_R6 || CPU_P5600
config CPU_MIPS64
bool
......@@ -2076,7 +2103,7 @@ config CPU_MIPSR2
config CPU_MIPSR5
bool
default y if CPU_MIPS32_R5 || CPU_MIPS64_R5
default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 || CPU_P5600
select CPU_HAS_RIXI
select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
select MIPS_SPRAM
......@@ -2689,7 +2716,7 @@ config RELOCATABLE
depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \
CPU_MIPS32_R5 || CPU_MIPS64_R5 || \
CPU_MIPS32_R6 || CPU_MIPS64_R6 || \
CAVIUM_OCTEON_SOC
CPU_P5600 || CAVIUM_OCTEON_SOC
help
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
......
......@@ -152,6 +152,7 @@ cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R5) += -march=mips64r5 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap
cflags-$(CONFIG_CPU_P5600) += -march=p5600 -Wa,--trap -modd-spreg
cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \
-Wa,--trap
......
......@@ -131,6 +131,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "LOONGSON64 "
#elif defined CONFIG_CPU_CAVIUM_OCTEON
#define MODULE_PROC_FAMILY "OCTEON "
#elif defined CONFIG_CPU_P5600
#define MODULE_PROC_FAMILY "P5600 "
#elif defined CONFIG_CPU_XLR
#define MODULE_PROC_FAMILY "XLR "
#elif defined CONFIG_CPU_XLP
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment