scsi: lpfc: ls_rjt erroneus FLOGIs

In some link initialization sequences, the fw generates an erroneous FLOGI
payload to the driver without an intervening link bounce.  The driver, when
it sees a 2nd FLOGI without an intervening link bounce, automatically
performs a link bounce. In this, the link bounce causes the situate to
repeat and in a nasty loop of link bounces.

Resolve the issue by validating the FLOGI payload. The erroneous FLOGI will
contain VVL signatures that are not normal. When the driver sees these, it
will simply reject the flogi rather than bouncing the link.  The reject is
consumed within the firmware.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc_els.c

@@ -8042,8 +8042,10 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	struct ls_rjt stat;
 	uint32_t *payload;
 	uint32_t cmd, did, newnode;
+	uint32_t vid, flag;
 	uint8_t rjt_exp, rjt_err = 0, init_link = 0;
 	IOCB_t *icmd = &elsiocb->iocb;
+	struct serv_parm *sp;
 	LPFC_MBOXQ_t *mbox;
 
 	if (!vport || !(elsiocb->context2))
@@ -8193,6 +8195,22 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 			did, vport->port_state, ndlp->nlp_flag);
 
 		phba->fc_stat.elsRcvFLOGI++;
+		sp = (struct serv_parm *)
+			((uint8_t *)payload + sizeof(uint32_t));
+
+		/* Check to see if this is firmware generated */
+		if (sp->cmn.valid_vendor_ver_level) {
+			vid = be32_to_cpu(sp->un.vv.vid);
+			flag = be32_to_cpu(sp->un.vv.flags);
+			if (vid == LPFC_VV_BRCD_ID) {
+				/* Drop this FLOGI */
+				lpfc_printf_vlog(
+					vport, KERN_INFO, LOG_ELS,
+					"3316 Dropping rcv FLOGI: "
+					"flag x%x\n", flag);
+				goto lsrjt;
+			}
+		}
 
 		/* If the driver believes fabric discovery is done and is ready,
 		 * bounce the link.  There is some descrepancy.
@@ -8440,6 +8458,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	 * link and start over.
 	 */
 	if (init_link) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "3318 Resetting Link, multiple rcv FLOGIs\n");
 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (!mbox)
 			return;

drivers/scsi/lpfc/lpfc_hw.h

@@ -525,6 +525,7 @@ struct serv_parm {	/* Structure is in Big Endian format */
 		struct {
 			uint32_t vid;
 #define LPFC_VV_EMLX_ID	0x454d4c58	/* EMLX */
+#define LPFC_VV_BRCD_ID	0x42524344	/* BRCD */
 			uint32_t flags;
 #define LPFC_VV_SUPPRESS_RSP	1
 		} vv;