Commit 289b098c authored by Christian Lamparter's avatar Christian Lamparter Committed by John W. Linville

p54: Move eeprom header

Copy the eeprom code from p54common.h into a new file eeprom.h
Signed-off-by: default avatarChristian Lamparter <chunkeey@web.de>
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 4c8a32f5
/*
* eeprom specific definitions for mac80211 Prism54 drivers
*
* Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
* Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
*
* Based on:
* - the islsm (softmac prism54) driver, which is:
* Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
*
* - LMAC API interface header file for STLC4560 (lmac_longbow.h)
* Copyright (C) 2007 Conexant Systems, Inc.
*
* - islmvc driver
* Copyright (C) 2001 Intersil Americas Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef EEPROM_H
#define EEPROM_H
/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */
struct pda_entry {
__le16 len; /* includes both code and data */
__le16 code;
u8 data[0];
} __packed;
struct eeprom_pda_wrap {
__le32 magic;
__le16 pad;
__le16 len;
__le32 arm_opcode;
u8 data[0];
} __packed;
struct p54_iq_autocal_entry {
__le16 iq_param[4];
} __packed;
struct pda_iq_autocal_entry {
__le16 freq;
struct p54_iq_autocal_entry params;
} __packed;
struct pda_channel_output_limit {
__le16 freq;
u8 val_bpsk;
u8 val_qpsk;
u8 val_16qam;
u8 val_64qam;
u8 rate_set_mask;
u8 rate_set_size;
} __packed;
struct pda_pa_curve_data_sample_rev0 {
u8 rf_power;
u8 pa_detector;
u8 pcv;
} __packed;
struct pda_pa_curve_data_sample_rev1 {
u8 rf_power;
u8 pa_detector;
u8 data_barker;
u8 data_bpsk;
u8 data_qpsk;
u8 data_16qam;
u8 data_64qam;
} __packed;
struct pda_pa_curve_data {
u8 cal_method_rev;
u8 channels;
u8 points_per_channel;
u8 padding;
u8 data[0];
} __packed;
struct pda_rssi_cal_entry {
__le16 mul;
__le16 add;
} __packed;
struct pda_country {
u8 regdomain;
u8 alpha2[2];
u8 flags;
} __packed;
struct pda_antenna_gain {
struct {
u8 gain_5GHz; /* 0.25 dBi units */
u8 gain_2GHz; /* 0.25 dBi units */
} __packed antenna[0];
} __packed;
struct pda_custom_wrapper {
__le16 entries;
__le16 entry_size;
__le16 offset;
__le16 len;
u8 data[0];
} __packed;
/*
* this defines the PDR codes used to build PDAs as defined in document
* number 553155. The current implementation mirrors version 1.1 of the
* document and lists only PDRs supported by the ARM platform.
*/
/* common and choice range (0x0000 - 0x0fff) */
#define PDR_END 0x0000
#define PDR_MANUFACTURING_PART_NUMBER 0x0001
#define PDR_PDA_VERSION 0x0002
#define PDR_NIC_SERIAL_NUMBER 0x0003
#define PDR_NIC_RAM_SIZE 0x0005
#define PDR_RFMODEM_SUP_RANGE 0x0006
#define PDR_PRISM_MAC_SUP_RANGE 0x0007
#define PDR_NIC_ID 0x0008
#define PDR_MAC_ADDRESS 0x0101
#define PDR_REGULATORY_DOMAIN_LIST 0x0103 /* obsolete */
#define PDR_ALLOWED_CHAN_SET 0x0104
#define PDR_DEFAULT_CHAN 0x0105
#define PDR_TEMPERATURE_TYPE 0x0107
#define PDR_IFR_SETTING 0x0200
#define PDR_RFR_SETTING 0x0201
#define PDR_3861_BASELINE_REG_SETTINGS 0x0202
#define PDR_3861_SHADOW_REG_SETTINGS 0x0203
#define PDR_3861_IFRF_REG_SETTINGS 0x0204
#define PDR_3861_CHAN_CALIB_SET_POINTS 0x0300
#define PDR_3861_CHAN_CALIB_INTEGRATOR 0x0301
#define PDR_3842_PRISM_II_NIC_CONFIG 0x0400
#define PDR_PRISM_USB_ID 0x0401
#define PDR_PRISM_PCI_ID 0x0402
#define PDR_PRISM_PCI_IF_CONFIG 0x0403
#define PDR_PRISM_PCI_PM_CONFIG 0x0404
#define PDR_3861_MF_TEST_CHAN_SET_POINTS 0x0900
#define PDR_3861_MF_TEST_CHAN_INTEGRATORS 0x0901
/* ARM range (0x1000 - 0x1fff) */
#define PDR_COUNTRY_INFORMATION 0x1000 /* obsolete */
#define PDR_INTERFACE_LIST 0x1001
#define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002
#define PDR_OEM_NAME 0x1003
#define PDR_PRODUCT_NAME 0x1004
#define PDR_UTF8_OEM_NAME 0x1005
#define PDR_UTF8_PRODUCT_NAME 0x1006
#define PDR_COUNTRY_LIST 0x1007
#define PDR_DEFAULT_COUNTRY 0x1008
#define PDR_ANTENNA_GAIN 0x1100
#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901
#define PDR_RSSI_LINEAR_APPROXIMATION 0x1902
#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903
#define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904
#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905
#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906
#define PDR_REGULATORY_POWER_LIMITS 0x1907
#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908
#define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909
#define PDR_PRISM_TX_IQ_CALIBRATION 0x190a
/* reserved range (0x2000 - 0x7fff) */
/* customer range (0x8000 - 0xffff) */
#define PDR_BASEBAND_REGISTERS 0x8000
#define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001
/* used by our modificated eeprom image */
#define PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM 0xDEAD
#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM 0xBEEF
#define PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM 0xB05D
/* Interface Definitions */
#define PDR_INTERFACE_ROLE_SERVER 0x0000
#define PDR_INTERFACE_ROLE_CLIENT 0x0001
/* PDR definitions for default country & country list */
#define PDR_COUNTRY_CERT_CODE 0x80
#define PDR_COUNTRY_CERT_CODE_REAL 0x00
#define PDR_COUNTRY_CERT_CODE_PSEUDO 0x80
#define PDR_COUNTRY_CERT_BAND 0x40
#define PDR_COUNTRY_CERT_BAND_2GHZ 0x00
#define PDR_COUNTRY_CERT_BAND_5GHZ 0x40
#define PDR_COUNTRY_CERT_IODOOR 0x30
#define PDR_COUNTRY_CERT_IODOOR_BOTH 0x00
#define PDR_COUNTRY_CERT_IODOOR_INDOOR 0x20
#define PDR_COUNTRY_CERT_IODOOR_OUTDOOR 0x30
#define PDR_COUNTRY_CERT_INDEX 0x0f
/* Specific LMAC FW/HW variant definitions */
#define PDR_SYNTH_FRONTEND_MASK 0x0007
#define PDR_SYNTH_FRONTEND_DUETTE3 0x0001
#define PDR_SYNTH_FRONTEND_DUETTE2 0x0002
#define PDR_SYNTH_FRONTEND_FRISBEE 0x0003
#define PDR_SYNTH_FRONTEND_XBOW 0x0004
#define PDR_SYNTH_FRONTEND_LONGBOW 0x0005
#define PDR_SYNTH_IQ_CAL_MASK 0x0018
#define PDR_SYNTH_IQ_CAL_PA_DETECTOR 0x0000
#define PDR_SYNTH_IQ_CAL_DISABLED 0x0008
#define PDR_SYNTH_IQ_CAL_ZIF 0x0010
#define PDR_SYNTH_FAA_SWITCH_MASK 0x0020
#define PDR_SYNTH_FAA_SWITCH_ENABLED 0x0020
#define PDR_SYNTH_24_GHZ_MASK 0x0040
#define PDR_SYNTH_24_GHZ_DISABLED 0x0040
#define PDR_SYNTH_5_GHZ_MASK 0x0080
#define PDR_SYNTH_5_GHZ_DISABLED 0x0080
#define PDR_SYNTH_RX_DIV_MASK 0x0100
#define PDR_SYNTH_RX_DIV_SUPPORTED 0x0100
#define PDR_SYNTH_TX_DIV_MASK 0x0200
#define PDR_SYNTH_TX_DIV_SUPPORTED 0x0200
#define PDR_SYNTH_ASM_MASK 0x0400
#define PDR_SYNTH_ASM_XSWON 0x0400
#endif /* EEPROM_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment